false
END OF WINTER DEAL25% off on top of all Clothing sale items. Valid only until Monday Feb 06th, 23:59 p.m. Code: endwinter23
5 € VOUCHERJOIN OUR MAILING LIST

DJ Equipment Sale 102 Items

Show Filter & CategoriesFilter Results
Sorting: Popular
Audio-Technica - AT-LP120X
Audio-Technica
AT-LP120X
269,00 €* 349,00 € -22%
AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q
Audio-Technica - AT-LP120X
Audio-Technica
AT-LP120X
269,00 €* 349,00 € -22%
AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q
Obey Records - Supreme Cuts Slipmat
Obey Records
Supreme Cuts Slipmat
13,49 €* 14,99 € -10%
This Obey Records Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.
Cambridge Audio - Alva ST
Cambridge Audio
Alva ST
699,00 €* 999,00 € -30%
Belt Drive Turntable with Bluetooth® aptX HD

• Bluetooth aptX HD – Switchable Hi-Res wireless streaming. Place the turntable on a flat-surface that suits you.
• Built-In Phono Stage – Switchable phono pre-amp, direct connection to amp – keep your setup simple.
• Belt Drive – With simple electronic push button speed control.
• Pre-installed Moving Magnet Cartridge – A well-regarded choice, play records in minutes.
• New Tonearm with Removable Headshell – Lightweight and strong. Tracks your records flawlessly.

Just Add Vinyl
There’s nothing quite like vinyl: the tactile pleasure of removing a record from its sleeve and carefully placing it on a deck is unique. We designed the original Alva TT to honour that tradition, and Alva ST to share that pleasure with more people.
With a pre-fitted cartridge –so you’ll be playing records in minutes – the belt-drive Alva ST also features switchable Hi-Res Bluetooth streaming and integrated phono stage.
Everyone should be able to enjoy the freedom Alva brings.

King of Convenience
Alva ST is for people who want to listen to records at exceptional quality – without the need to choose or fit extra components. Alva ST keeps it simple with perfectly matched cartridge pre-installed. Alva ST connects to pretty much any audio system too, as it has a switchable integrated phono-stage. It even works wirelessly with Bluetooth speaker systems.

Hi-Res Bluetooth
Built-in Bluetooth aptX HD liberates Alva from the rest of your hi-fi. With the freedom to place an Alva deck on any flat surface, your records take centre-stage. Music can be streamed to any compatible Bluetooth kit, including headphones, at up to 24bit/48kHz Hi-Res quality. Or, you can deactivate it and simply use phono cables – it’s your call.

Integrated Phono Stage
Alva ST has an integrated phono stage (phono pre-amp), derived from our award-winning Alva Duo – to reveal incredible detail from your records. It means you can connect Alva ST to any amp or compatible speaker system. You can deactivate the deck’s phono stage, too – ideal if your amp already has one or to keep upgrade options open.

MM Cartridge Pre-installed
After hours of listening, we selected an Audio Technica Moving Magnet cartridge to be ready fitted on Alva ST. With no fiddly set-up you’ll be playing records in minutes. The elliptical stylus provides a greater contact area with your records’ grooves, producing accurate tracking of information and, of course, great sounding music.

Belt Drive
Alva ST uses the proven belt-drive method, supplemented with electronic motor speed control. After connecting the belt for the first time, you won’t need to look under the platter again. Rotation speed selection is made by 2 neat electronic buttons on the ST’s aluminium top surface – so you can effortlessly switch between playing albums and singles.

Aluminium, Tuned
Alva ST’s platter is aluminium die-cast, finished by CNC to ensure a totally level and smooth surface. The 17mm high aluminium platter is finished with a 5mm rubber mat – a combination proven to reduce unwanted resonance.

All-New Tonearm
After hours of testing, our engineers selected a new high-mass, low-resonance tonearm for Alva TT V2 and Alva ST. By minimising resonant frequencies, and in combination with the cartridge, it helps retrieve the maximum detail from your records. A detachable die-cast aluminium headshell makes swapping cartridges easy – then fine-tuned with greater precision thanks to a new anti-skating dial.

Designed for Life
A record collection can last a lifetime, so why shouldn’t a turntable? We built Alva ST to do just that, with a 1mm aluminium top plate, and a layer of EVA to absorb vibration sitting on top of MDF. It’s cradled in a composite chassis and weighs 9kg. Reassuring solid, and with great sound absorption qualities too.

Timeless Style, from London
Finished with a lunar-grey aluminium top plate and matt black plinth, tapering to our trademark floating wedge base, Alva ST shares our minimalist house style. It’s the perfect match for our best-selling Evo and CX Series hi-fi separates. Designed and engineered in London with the emphasis on classic timeless style.

Dust Never Sleeps
Keep your new Alva turntable’s finely balanced tonearm and aluminium top-plate pristine when you’ve finished spinning discs for the day, with the hinged dust-cover. It’s easy to raise, lower, remove and re-attach – the choice is yours.

Technical specifications:
• TYPE: Belt Drive
• TURNTABLE SPEEDS: 33.3, 45rpm
• WOW & FLUTTER: <0.12%
• TURNTABLE PLATTER: Die Cast Aluminium
• PLATTER DIAMETER: 305mm
• PLATTER WEIGHT: 645.3g (930.5g inc. rubber mat)
• AUDIO OUT: RCA Phono/Line Level (Switchable)
• BLUETOOTH: SBC/aptX/aptX HD
• POWER SUPPLY: AC 100-240V, 60/50Hz
• POWER CONSUMPTION: 6W
• MAX POWER CONSUMPTION: 20W
• STANDBY POWER CONSUMPTION: <0.3W
• DIMENSIONS (W X H X D): 435 x 139 x 366.7mm
• WEIGHT: 9kg
• PHONO STAGE GAIN @1KHZ: 42dB
• PHONO STAGE NOMINAL OUTPUT: 250Vrms
• PHONO STAGE INPUT NOISE (A-WEIGHTED): 0.1u Vrms
• PHONO STAGE RIAA CURVE ACCURACY: *+/- 0.3dB 30Hz-20kHz
• PHONO STAGE SIGNAL/NOISE RATIO: >90dB
• PHONO STAGE THD+N 1KHZ: 0.0025%
• PHONO STAGE INPUT IMPEDANCE: 47Ω
• PHONO STAGE INPUT CAPACITANCE: 100pF
• TONEARM TYPE: Static Balanced Tonearm w/ detachable Headshell
• TONEARM EFFECTIVE LENGTH: 221.5mm
• TONEARM OVERHANG: 19mm
• TONEARM EFFECTIVE MASS: 19.6g
• TONEARM COMPATIBLE CARTRIDGE WEIGHTS: 4.5-12g
• CARTRIDGE: Moving Magnet
• CARTRIDGE FREQUENCY RESPONSE: +/- 0.5dB 30Hz-20kHz
• CARTRIDGE STYLUS: Elliptical
• CARTRIDGE CANTILEVER: Alloy Tube
• CARTRIDGE OUTPUT LEVEL: 1.8~3.6mV @1kHz
• CARTRIDGE TRACKING FORCE: 2g
• CARTRIDGE RECOMMENDED LOAD: 47Ω

Manual: https://manuals.cambridgeaudio.com/en/alva-st
DJ Shadow - Endtroducing - Slipmat (Pair)
DJ Shadow
Endtroducing - Slipmat (Pair) (2 Pieces)
17,99 €* 19,99 € -10%
The DJ Shadow "Endtroducing" Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.
AIAIAI - TMA-2 Studio XE (preset)
AIAIAI
TMA-2 Studio XE (preset)
145,00 €* 179,00 € -18%
TMA-2 Studio XE
- Professional modular studio headphones
Product Description.
Professional lightweight studio headphones with
AIAIAI signature audio and enhanced comfort and
isolation.
This is a headphone for the dynamic music maker
being creative in a dynamic and flexible
environment. HIghly detailed audio from the
signature bio-diaphragm driver ensures a precise
and reliable audio for your creative process.
LIghtweight design, great comfort and isolation
from the soft and closed ear cushions covered in
vegan leather results in a perfect fit for the
modern day music makers.
Part of the TMA-2 modular headphone system
notorious for its sturdy build and responsible
design - Designed to last

Trusted by professionals.
Developed with professional artists across a variety of genres. Trusted for music creativity and in the most vigorous environments - in the
studio, on the road, and on stage.
Lightweight studio headphones.
Minimalistic and lightweight construction. ideal for a versatile and dynamic workflow.
Signature AIAIAI sound tuned for clarity and detail.
Critically acclaimed sound specifically designed for studio use with a clear and highly detailed sound representation.
High isolation earpads.
High grade memory foam cushions covered with resilient and soft PU leather for high isolation suitable for any creative environment.
Bio-diaphragm speaker for enhanced accuracy.
Diaphragm precision-grown from bio-cellulose making it stiffer lighter and stronger than regular PET speaker units.
Responsible modular headphones - designed to last.
Upgrade and expand as technology or needs evolve to extend the funct

Sound.
The Bio-cellulose diaphragm
The bio-cellulose speaker diaphragm in S05 is made of a bacterial
cellulose which is an organic compound that is grown using certain
types of bacteria. Bio-cellulose is a really interesting material for
many reasons it’s renewable biodegradable and it has great
acoustic properties.
The role it plays when listening to music
If music is played through a poorly designed headphones that
produce a high amount of harmonic distortion it will simply sound
wrong and unnatural. This is because the harmonic distortion
changes how we perceive the timbre and tonality of the sound
which is obviously really problematic when producing music or
mixing a track. The biocellulose diaphragm on the other hand is
able to reproduce the music faithfully with great clarity even at
high volume levels.
S05
For the S05 we paired the biocellulose diaphragm with a high grade
neodymium magnet which resulted in a speaker unit that offers a clear
mid-range better dynamics and a more natural overall tonality. When
tuning the speaker unit we paid special attention to the clarity in the
mid-range without compromising the extension in the bass range. This
results in a very wide sound stage with great instrumental separation. The
music maker is able to extract and enjoy every little detail in the music.

Specs.
Driver diameter.
40 mm.
SPL at 1kHz.
117 dB
Resonance.
80 Hz
Impedance.
32 Ohm
Diaphragm material.
Bio-cellulose
Magnet type.
High grade Neodymium
Rated power.
40 mW
Max power.
100 mW
Reloop - Spin Stylus
Reloop
Spin Stylus
6,64 €* 6,99 € -5%
The Reloop SPIN cartridge system is suitable for scratching, due to the spherical stylus, and is ideally suited for the portable playback of records. With a high tracking ability, the cartridge always stays in the record groove and does not jump, even during fast manoeuvres. In addition, the stylus has a positive effect on vinyl wear.

FEATURES
• Optimized for portable record playback
• Suitable for scratching due to high tracking ability
• Spherical stylus
• Very low vinyl wearout

TECHNICAL DATA
• Frequency range: 100 Hz - 10 kHz
• Output voltage (3.54 cm/s): 180 - 360 mV
• Tracking force range: 4 - 6 g
• Recommended tracking force: 5 g
• Weight: 1.8 g (+/- 0.5 g)
Pro-Ject - Juke Box E HiFi Set (Ortofon OM 5E)
Pro-Ject
Juke Box E HiFi Set (Ortofon OM 5E) (3 Pieces)
699,00 €* 899,00 € -22%
Features
•Instant playback with super-easy setup
•High contrast display on top
•Bluetooth and 1 line input
•Line record output
•Gold plated sockets
•Pre-adjusted tracking force & anti-skating force
•Ortofon OM5e cartridge, pre-mounted
•8.6” aluminium tonearm with sapphire bearings
•Belt drive with silicone belt
•Low vibration synchronous motor & DC power supply
•Special feet for effective decoupling
•IR remote control included
•Set includes: Juke Box E, Speaker Box 5, Damp it, speaker cables, banana plugs

Technical Specifications
•Power output: 2 x 50 Wats (4 Ohm)
•Outputs: Speakers, Line out (fixed), Phono out
•Inputs: Bluetooth, 1x Line (analogue)
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Platter: 300 mm plywood with felt mat
•Main bearing: Stainless steel in bronze bushing
•Tonearm: 8.6” aluminium
•Included accessory: Power supply, dust cover, remote control, speaker cables, Damp it, banana plugs
•Power consumption: 110W max
•Dimensions (Juke Box E): 415 x 118 x 334mm (WxHxD)
•Weight (Juke Box E): 5 kg netto
•Dimensions (Speaker Box 5): 160 x 255 x 210mm (WxHxD)
•Weight (Speaker Box 5): 4.2 kg netto
Serato x Thud Rumble - Weapons of Wax #3 (Guillotine) 1x 12
Lenco - LS-300
Lenco
LS-300
215,99 €* 239,99 € -10%
PROS
•MDF housing
•2 loose speakers
•Selectable speed
•Bluetooth / Auto-stop

PRODUCT INFORMATION
•The Lenco LS-300 is a modern turntable with two loose speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-300 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. The 2 separate wooden speakers are powerful enough to fill any room with music. The turntable also features Bluetooth, making it easy to stream music from your smartphone.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-300 features auto-stop. This function ensures that the record stops turning. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-300 is supplied with a plastic cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•SKU: A003105
•Product height: 15.20 cm
•Product depth: 35.00 cm
•Product width: 43.80 cm
•Number of speakers: 2
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040996
•Material: Wood
•Manufacturer's warranty: 24 months
•Stand-by power consumption (ErP Directive): 1W
•Maximum power consumption: 24W
Lenco - LS-50
Lenco
LS-50
134,99 €* 149,99 € -10%
Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs
DJ Eule - Scratching Is A Part Of My Life Slipmat
DJ Eule
Scratching Is A Part Of My Life Slipmat
13,49 €* 14,99 € -10%
Classic slipmat made of felt. Protects your vinyl and reduces friction while Scratching, Backspins and Beatjuggling.

Diameter: 300mm
Thickness: 3mm
airbag craftworks - Taunus 1.2 Com Fi Backpack (25)
airbag craftworks
Taunus 1.2 Com Fi Backpack (25)
116,10 €* 129,00 € -10%
puristic lightweight backpack

_space for 15 inch laptops or up to 25x 12"records
_unique adjustable leather buttons closure
for 2 different formats /heights
_the back is cushioned for comfortable carrying
_each taunus backpack comes with a removable
inside zipper pocket.

material: water-repellent cotton canvas

5 cm taller version
w/ additional laptop pouch up to 15” size
w/ detachable inside zip pocket dock
w/ wider straps (40 mm)

material:
# waterproof cotton w/ leather buttons

size:
48 x 38 x 8 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com
Lenco - L-30
Lenco
L-30
134,99 €* 149,99 € -10%
Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs
Lenco - LS-40
Lenco
LS-40
116,99 €* 129,99 € -10%
PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes
Lenco - LS-40
Lenco
LS-40
116,99 €* 129,99 € -10%
PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Wood
•SKU: A003104
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040989
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes
Mr Bongo - Logo - Single Slipmat
Mr Bongo
Logo - Single Slipmat
13,49 €* 14,99 € -10%
The Mr Bongo Logo Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.
Audio-Technica - AT-LH18H
Audio-Technica
AT-LH18H
89,99 €* 99,99 € -10%
18g adjustable through hole type headshell with OFC lead-wires.

AT-LH18H 18g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)
Audio-Technica - AT-LH15H
Audio-Technica
AT-LH15H
89,99 €* 99,99 € -10%
15g adjustable through hole type headshell with OFC lead-wires.

AT-LH15H 15g adjustable through hole type headshell with OFC lead-wires - Aluminum headshell with hard anodized finish reduces unwanted vibration, Oxygen Free Copper (OFC) lead-wires for improved audio transmission and Non-threaded holes in headshell.

AT-LH headshells from Audio-Technica, pioneers of cartridge and headshell technology for over 50 years, can be paired with the next generation of AT-OC9x cartridges and are available in three weights: light(13,) midweight (15) and a higher weighted model (18), to suit the specifications of your tonearm and cartridge.

Specifications:
• Aluminium headshell with hard anodized finish reduces unwanted vibration
• Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission
• Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series.
• Adjustable cylinder enables precise azimuth and overhang setting
• Available in three weights: 13g (AT-LH13H), 15g (AT-LH15H), and 18g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements
• Includes: hexagonal wrench, cartridge installation screw (M2.6) (8.0 mm x 2, 10.0 mm x 2), plastic washer (x 2)
Jetpack - Cut
A Tribe Called Quest - Low End Theory Slipmat
Zomo - VS-Rack Wave
Zomo
VS-Rack Wave
80,99 €* 89,99 € -10%
The Wave is the latest addition to Zomo's popular VS-Rack series. This stylish record rack offers - depending on the thickness of the LPs and stack white - space up to 40 records. Thereby the records can be stacked in 2 different ways in the rack: Either classically between the ribs or also crosswise, so that you can quickly browse through your favorite vinyls.

Like all VS-Rack shelves, the Wave is made of powder-coated steel and convinces not only with its stable and safe stand, but also with its unique look, which makes it an eye-catcher in every living room or studio. The Wave is available in 4 different colors, so that it can fit into any ambience.

Features Zomo VS-Rack Wave
•Record rack with space between 29 - 40 LPs (depending on stacking form)
•Unique design and optical highlight in every living room or studio
•LPs can be sorted in 2 different ways
•Stable, secure stand
•Robust, powder-coated steel
Technical data
•Weight: 2,5 kg
•Dimensions (W x D x H): 300 x 300 x 220 mm
Ortofon - DigiTrack Limited Stylus
Ortofon
DigiTrack Limited Stylus
38,70 €* 43,00 € -10%
Digitrack Limited Edition stylus
The Digitrack Limited Edition is the perfect marriage of easy and function. You can now manipulate MP3's with the style and feel of a turntablist and the tradition of a turntable. The Digitrack Limited Edition responds to the DJs who make extensive use of timecoded vinyl applications.

Digitrack Limited Edition low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.

The Digitrack Limited Edition also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

Digitrack Limited Edition Technical data
Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz +3/-2 dB

Tracking ability at 315 Hz at recommmende tracking force - 90 μm
Compliance, dynamic lateral - 12 μm/m N
Stylus type - Spherical
Tracking force range - 2.0-4.0 g (20-40 mN)
Tracking force recommended - 3.0 g (30 mN)
Concorde cartridge weight - 18.5 g

Compatible with cartridges - Digitrack Limited Edition (discontinued and no longer available)
Audio-Technica - AT-LH18/OCC
Audio-Technica
AT-LH18/OCC
71,99 €* 79,99 € -10%
18g TechniHard™ adjustable headshell with AT6101 quad wire.

A 18g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headshell threads to avoid the use of nuts when fitting cartridges.
The headshell is equipped with four AT6101 PCOCC lead wires, high purity, oxygen free, with a structure of 22 strands of 0.12mm and 24 carat gold plated terminals.
Crosley - Charlotte Bluetooth Speaker
Crosley
Charlotte Bluetooth Speaker
58,49 €* 64,99 € -10%
Enjoy your digital music in a Crosley retro design. A Bluetooth speaker is, in this day and age, an interior must have. You can take this portable Bluetooth hero anywhere you like, because of the rechargeable batteries and its compact design.
The Charlotte Bluetooth speaker is a great addition to our collection. With the chargeable lithium batteries, you can take this little light-weighted speaker everywhere you go. You can connect every device or record player through the Bluetooth connection or AUX cable.

• 2 rechargeable Lithium-Ion batteries
• Full Range Portable Bluetooth speaker 2.5” Speaker 4Ω 5w
• Built-in Bluetooth receiver
• USB port
• Headphone Jack
• Auxilery input
• Dimensions: 25 cm (w) 15 cm (h) 11 cm (d)
• Weight 1 kg
Jam, The - In The City Slipmat
Jam, The
In The City Slipmat
11,69 €* 12,99 € -10%
• Personalise your turntable with slipmats
• Provides protection for your vinyl from scuffs and scratches and also for your turntable
• Made from high quality felt, our slipmats make DJing mixing easier
• Vibration dampening qualities
• 12“ diameter
Damir Brand - Forty5
Damir Brand
Forty5 "Doncha" Adapter
18,89 €* 20,99 € -10%
45 rpm adapter for large hole 7″ records

Individual adapter comes in clear box

Material: PLA
Zomo - VS-Box 1/45
Zomo
VS-Box 1/45
53,99 €* 59,99 € -10%
The VS-Box 1/45 is a vinyl storage box which can be attached to the wall for your convenience. It can be fastened very easily and ensures your favourite records are always at hand. It can be combined with other boxes of the same kind for efficient storage layout. The puristic design fits in every living room and ensures that the furniture is both practical and decorative.

Features

Capacity: 40-50 LPs
Designed for mounting on the wall
Material: medium density fibreboard with laminated decor
Ageless design
High-grade workmanship
Technical Data

Dimensions: 360x170x190 mm
Weight: 2,7 kg
Damir Brand - Forty5
Damir Brand
Forty5 "Pot Of Gold" Adapter
18,89 €* 20,99 € -10%
45 rpm adapter for large hole 7″ records

Individual adapter comes in clear box

Material: PLA
Goldring - E1 Stylus
Afromats - Checkers Slipmat
Elac - Miracord 90 lite
Afromats - Kaleidoscope Slipmat
Chinese Man - New Logo Slipmat
Chinese Man
New Logo Slipmat
13,49 €* 14,99 € -10%
Available Sizes:One Size
The Chinese Man "New Logo" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.
astat - Grüner Record-Film (Nachfüll-Flasche 500ml)
Afromats - Kaleidoscope Slipmat
Afromats - Kente Slipmat
Damir Brand - Forty5
Damir Brand
Forty5 "Dope" Adapter
13,49 €* 14,99 € -10%
45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear box

Material: PLA
Afromats - Kente Slipmat
Dual - CS 518
Vinyl Storage - 7
Vinyl Storage
7" Registerblatt (Grau) (25 Pieces)
20,89 €* 21,99 € -5%
7" Dividers for single collections, black

• 185 x 210 mm
• Rounded edges
• One side matt/sand-blasted, one side glossy/smooth
• Can be labelled with felt markers, writing can be removed with alcohol
• Made in Germany
Dual - CS 429
Reloop - Turntable Cartridge Mount & Gauge Set
Reloop
Turntable Cartridge Mount & Gauge Set
56,05 €* 59,00 € -5%
Turntable Cartridge Mount & Gauge Set:

ALL-IN-ONE SET
The turntable tone arm and cartridge should always be correctly aligned and regularly maintained allowing you to enjoy the great sound of your vinyl collection to the max.
The Reloop Turntable Cartridge Mount & Gauge Set includes everything you need to perfectly align, care for and clean both your turntable and cartridge.

CARTRIDGE ALIGNMENT PROTRACTOR
The practical SME alignment tool with mirroring for aligning the cartridge allows you to precisely measure the distance between the cartridge tip and the tone arm pivot point so you can optimise the angle of the headshell system. The result is much improved track precision, significantly less wear, and crystal clear sound.

THOROUGH NEEDLE CARE
Thanks to the high-quality stylus cleaning fluid, both stubborn dirt and the finest vinyl residues can be removed without leaving any trace.

LEVEL YOUR TURNTABLE ACCURATELY
Another very useful tool, the spirit level, which allows you to finely align turntables and headshell systems so that they are in the perfect position.

DETERMINE THE STYLUS TRACKING FORCE
The stylus tracking force gauge and the five included balancing weights also make it possible to determine the optimum contact force of the pick-up systems.

COMPREHENSIVE ACCESSORIES
As you would expect, a metal screwdriver for mounting headshell systems and tweezers for delicate adjustments are also included.

PREMIUM GIFT PACKAGING
The set comes in a high-quality storage box to keep everything organised and safe.

FEATURES
• All-in-one set for adjusting, aligning and cleaning turntable tone arm and cartridge
• Mirrored SME alignment tool for aligning the cartridge
• Highly efficient cleaning fluid for removing dirt and vinyl residues
• Metal screwdriver for mounting headshell systems
• Spirit level for aligning the pick-up systems and for adjusting turntable, CD player and other equipment
• Tone arm balance for determining the needle contact force with 5 balancing weights (0.5 – 3 g)
• Tweezers
• High-quality storage box
• SME alignment tool: 135 x 32 mm
• Stylus cleaning fluid: 20 ml
• Spirit level: D = 18 mm
• Stylus tracking force gauge / scale: 5 balancing weights (0.5 g, 0.75 g, 1 g, 2 g, 3 g)
• Box dimensions: 254 x 33 x 181 mm
• Complete Box weight: 321 g
• Set comprising: mirrored SME alignment tool, highly efficient stylus cleaning fluid,
spirit level, stylus tracking force gauge, 5 balancing weights, metal screwdriver, tweezers, high-quality storage box

https://www.reloop.com/media/catalog/product/pdf/2/4/5/245243_Reloop_IM.pdf
Missy Elliot - Classic Press Shot - Single Slipmat
Missy Elliot
Classic Press Shot - Single Slipmat
13,49 €* 14,99 € -10%
The Missy Elliot "Classic Press Shot" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.
Teac - TN-3B
Teac
TN-3B
350,55 €* 369,00 € -5%
A new, high-performance standard for belt-drive analog turntables

The TN-3B is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier and USB digital output.

It employs a new tonearm with knife-edge, pivot-point bearings, co-developed with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution.

The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation.

The TN-3B also employs a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality. In addition, a built-in Analog-to-Digital converter and USB port allow users to digitise their vinyl libraries on their PC/Mac.

The TN-3B delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.

 Knife-edge, pivot-point tone-arm bearings
In collaboration with SAEC Corporation, a world-famous, high-end
tonearm manufacturer, the TN-4D's tonearm employs a knife-edge,
pivot-point bearing. Unlike the case for tonearms with conventional
bearings, any fine vertical movements that take place in this
tonearm actually help in delivering a more dynamic sound with
excellent resolution. The S-shaped tonearm also employs a universal
headshell fitting, allowing users to quickly and easily swap
cartridges/headshells, and supports a wide range of cartridge
weights (from 14 - 23g / 0.5 - 0.8 oz.)
 Precision anti-skating and stylus-pressure adjustment
The static-balanced, S-shape tone-arm is equipped with a
counterweight for precise stylus-pressure adjustment, as well as an
anti-skating mechanism for accurate tracking force adjustment,
allowing the cartridge to accurately play any quality vinyl disc.
 Pre-installed VM-series cartridge
An audio-technica AT-VM95E cartridge with an elliptical-shaped
stylus tip comes pre-installed on the headshell for convenience. After
you’ve opened the box, set up the platter and mounted the headshell
on the tonearm, you'll be ready to enjoy your records.
 Built-in MM-type phono EQ amplifier
The TN-3B incorporates an MM-type phono EQ amplifier, allowing you to
connect the turntable to a conventional amplifier/hi-fi system that lacks a
PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed
to boost the low-level signals from the phono cartridge up to LINE level.
 External belt-drive with aluminum die-cast platter
A belt-drive arrangement is employed in order to minimise
any motor cogging effects by driving the outer rim of the
platter (which has a larger diameter, mass and surface
area).
 Luxurious, multi-layer lacquer paint finish
All internal components are mounted on a robust and highdensity MDF plinth for rigidity and vibration-deadening.
Thanks to its sleek and stylish design, the TN-3B looks at
home in most domestic environments, creating the perfect
setting for listening to vinyl records.
 USB digital output for digital archiving
A USB port on the back panel delivers CD-quality digital audio to your PC/Mac, allowing you to
record/archive your analog library in a high quality, digital audio format. Once you have archived your
vinyl to digital, it’s a simple matter to listen to them while out and about, via a smartphone/portable
audio player, or in your car (by burning them onto a CD-R or transferring them to a memory
card/stick).
And to ensure pristine signal transfer, gold-plated PHONO/LINE output terminals are employed to
prevent analog audio signals from losing quality as a result of oxidation.
 33-1/3 and 45 rpm 2-speed turntable
The TN-3B supports both 33-1/3 and 45 rpm for LP and EP records. Our insistence on quality
engineering can even be seen in the construction of the rotary control for start-up/speed selection,
formed of machined aluminium.
 Insulating feet with excellent shock absorption
The insulating feet comprise a machined aluminium shell, topped
with a rubber cushion that is fixed to the high-density MDF plinth.
Thanks to their excellent shock absorption characteristics, the TN3B is very resistant to acoustic feedback.
 Honeycomb patterned bottom panel
In order to achieve sleek cabinet design without compromising rig

Features at-a-glance

• 2-speed, belt-drive turntable offering 33-1/3 and 45 rpm speeds
• Knife-edge, pivot-point tonearm designed by high-end tonearm manufacturer SAEC
• Static-balanced, S-shaped tone-arm with pre-installed audio-technica AT-VM95E MM cartridge
• Die-cast aluminum platter
• USB digital output for digital archiving on PC/Mac
• PHONO/LINE analog outputs (switchable)
• Built-in PHONO EQ amplifier, compatible with MM-type cartridges
• Hi-fi grade NJM8080 op-amp used in PHONO EQ stage

Specifications
Turntable section
Type Belt-drive
Motor DC Motor
Rotation speed 33-1/3rpm, 45rpm
Wow and flutters less than 0.1%
Signal-to-Noise ratio 67dB (A-weighted,20KHz LPF)
Platter Die-cast aluminium, 30cm diameter
Tonearm section
Type Static-balanced, S-shape with knife-edge bearings
Effective tone-arm length 223mm
Anti-skating mechanism Supported
Stylus pressure range 0 to 5g
Compatible cartridge weight 3.0g to 12g
14g to 23g (incl. head-shell)
Cartridge section
Type VM-series (Moving Magnet-type)
Output voltage 4.0mV (1kHz, 5cm/sec.)
Stylus pressure range 1.8g to 2.2g (2.0g recommended)
Cartridge weight 6.1g
Head-shell weight 11g (incl. screws, nuts, and wires)
Stylus life approx. 300 hours (depending on conditions)

Analog outputs
Connectors RCA output x 1 pair (gold-plated)
Output Voltage
PHONO EQ THRU 4.0mV (1kHz, 5cm/sec.)
PHONO EQ ON 224mV (-13dBV)
USB section
Connector USB B-type (FULL-SPEED) x 1
(DC 5V 500mA supply required)
Sampling frequency 8k / 11.025k / 16 k/ 22.05k / 32k / 44.1k / 48kHz
Bit depth 16-bit
General
Power AC 100V to 240V, 50/60Hz
Power consumption less than 1.5W
Standby power less than 0.5W
GND terminal Fitted
Operating temperature range 5℃ to 35℃
Overall dimensions 420 x 117 x 356mm / 16.5” x 4.6” x 14.0” (dust cover closed)
420 x 381 x 402mm / 16.5” x 15.0” x 15.8” (dust cover opened)
Weight approx.5.0Kg / 11.0 lbs.
Included accessories Felt mat x1
EP adapter x1
Counter-weight x1
Headshell (with AT-VM95E pre-installed) x1
Platter x1
Dust cover x
Rubber feet for dust cover x2
Hinges x2
RCA audio cable x1
AC Adapter (GPE053A-V120050) x1
Owner’s manual (incl. Warranty) x1
Audio-Technica - AT-VM95EN
Audio-Technica
AT-VM95EN
113,05 €* 119,00 € -5%
Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver
Audio-Technica - ATH-M70X
Audio-Technica
ATH-M70X
265,05 €* 279,00 € -5%
The ATH-M70x professional studio monitor headphones feature proprietary 45 mm large-aperture drivers and are tuned to accurately reproduce extreme low and high frequencies (5 to 40,000 Hz) while maintaining perfect balance. They are ideal for studio mixing and tracking, FOH, DJing, mastering, post-production, audio forensics and personal listening. Crafted for lasting durability, the studio headphones provide excellent sound isolation and are equipped with 90° swiveling earcups for easy, one-ear monitoring.

Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.

Made for the Most Critical Listening Tasks - Pure Professional Performance
This is the flagship model of the M-Series. It incorporates everything we’ve learned about designing and manufacturing professional monitor headphones.

Long Lasting Durability - Studio Headphones, Built to Last
You won’t have to worry about these headphones – they’re ruggedly constructed with key metal components to ensure lasting performance.

Professional Performance - Tuned for Mixing and Mastering
Made for the most critical listening tasks, the M70x headphones are perfectly balanced to reproduce extreme low and high frequencies (5 to 40,000 Hz).

Features:
• M-Series flagship model, tuned for extremely accurate reproduction and carefully crafted using key metal components for lasting durability
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Extended response accurately reproduces extreme low and high frequencies while maintaining perfect balance
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpads and headband provide excellent durability and comfort, and detach for easy replacement
• Perfect for studio mixing and tracking, mastering and audio forensics
• Fold-flat design for space-saving portability
• Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45mm
• Frequency Response: 5 - 40,000 Hz
• Maximum Input Power: 2,000 mW @ 1KHz
• Sensitivity: 97 dB
• Impedance: 35 ohms
• Weight: 280g without cable/connector
• Cable: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Screw-on 1/4” adapter, pouch
Record Doctor - V Plattenwaschmaschine
Audio-Technica - AT-VM95C/H
Audio-Technica
AT-VM95C/H
60,80 €* 64,00 € -5%
AT-VM95C/H
VM95 SERIES CONICAL STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95C mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japa

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95C/H
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 20,000 Hz
Kanaltrennung 18 dB (1 kHz)
Kanalbalance am Ausgang 2.5 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Conical
Nadelabmessungen 0.6 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 6.5 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 15.5 g
Abmessungen 21.2 × 21.4 × 62.4 ( H x W x D mm)
Ersatznadel AT-VMN95C
UDG - Laptop/Controller Stand Aluminium
UDG
Laptop/Controller Stand Aluminium
180,49 €* 189,99 € -5%
Available Sizes:One Size
UDG's Laptop/Controller Stand Aluminium (U6010BL) is the only laptop stand for DJs that balances solid, secure construction, portable, foldaway, height and angle adjustable, tray rotatable, low-weight design and excellent affordability. Every performer who uses a computer including DJs, producers and other musicians can appreciate this high quality piece of equipment. It's the only laptop stand for DJs that balances solid, secure construction, portable, foldaway, height and angle adjustable, tray rotatable, low-weight design and excellent affordability. UDG's stand is fast to assemble. And comes with a protective neoprene sleeve.

UDG Laptop/Controller Stand Aluminium (U6010BL) - features/specs:

• Weight: 1.60 kg/3.52 lbs
• Outer Dimensions: 34 x 42 x 28 cm/13.4 x 16.5 x 11 inch
• Material: High quality aircraft grade anodized aluminum
• Protection: Neoprene Sleeve
• Extras: Height adjustable, angle adjustable, tray rotatable, removable sub tray, airflow constructed tray prevents equipment from overheating
• Fits 13”-18” laptop, iPad or controller
Audio-Technica - AT-XP3
Audio-Technica
AT-XP3
56,99 €* 59,99 € -5%
AT-XP3
Dual Moving Magnet Stereo Cartridge
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

• Audiophile DJ cartridge equipped with a conical stylus
• VM dual magnet construction
• Durable robust design for high-quality specialist DJ playback
• Signal output level and output impedance characteristics suited for professional DJ applications
• Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
• Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade

Specifications:
• Model AT-XP3
• Mounting Half-inch
• Frequency Response 20 to 18,000 Hz
• Channel Separation 20 dB (1 kHz)
• Output Channel Balance 2.0 dB (1 kHz)
• Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle 20 degrees
• Vertical Tracking Force Range 2.0 to 4.0g (standard 3.0 g)
• Stylus Shape Conical
• Stylus Size 0.6 mil
• Stylus Construction Bonded Round Shank
• Cantilever Carbon reinforced ABS
• Coil Impedance 6,700 ohms (1 kHz)
• Coil Inductance 550 mH (1 kHz)
• Static Compliance 20 x 10 – 6 cm / dyne
• Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
• Recommended Load Impedance 47,000 Ω
• Recommended Load Capacitance 100-200 pF
• Cartridge Weight 6.2g
• Dimensions 17.2 x 17.8 x 28.3 ( H x W x D mm)
• Replacement Stylus ATN-XP3
• Accessories Included Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver

manual: https://eu.audio-technica.com/resources/AT-XP3_UM_112301371_V1_11L_web_180620.pdf
Reloop - DSM-3 BT
Reloop
DSM-3 BT
157,69 €* 166,00 € -5%
VERSATILE MONITOR LOUDSPEAKER
The Reloop DSM-3 BT Smart Desktop Monitor system is the perfect solution for DJs and producers. Being so compact, it is ideal for small DJ setups and home studio environments. A powerful and balanced sound makes professional DJing and producing a real pleasure!

WIRELESS INPUT
Developed especially for this purpose, the DSM-3 BT system can connect all your Bluetooth devices with clear audio quality and a rich sound. Regardless of whether you are using a tablet, smartphone, or computer – a foolproof connection means you can immediately enjoy listening to your productions and music in optimal quality.

RICH & POWERFUL SOUND
The bass reflex design enables powerful bass and reduced air resistance. The optimised tweeters also provide a broad stereo sweet spot for producers. Last but not least, the built-in class A/B amplifiers deliver a clear, low-distortion and rich sound.

CONNECTIONS & CONTROLS ON THE FRONT
The sound of the DSM-3 BT can be perfectly adapted to every environment using the practical controls on the front. Controlling volume, bass/treble EQ, Bluetooth pairing or connecting headphones is all done with a single touch. As well as the RCA input on the rear providing further options for connecting DJ or production setups, there is also an additional mini jack for connecting an optional subwoofer.

DESIGN
The DSM-3 BT fits seamlessly into any environment with its classic and timeless design. The magnetically shielded drivers also ensure interference-free operation, even in close proximity to other equipment. Maximum stability as well as a powerful, clear sound thanks to the rugged, matt black surface and the curved edge design round off the smart, flexible system for DJs and producers.

FEATURES
• Professional 2-way active monitor system with wireless input
• Powerful, balanced sound for DJing and producing
• Smartphones and tablets can be connected wirelessly via Bluetooth®
• Bass reflex design for rich bass sound and reduced air resistance
• Optimised tweeter for a broad stereo sweet spot
• Class A/B amplifier for crisp sound with low distortion
• Front control unit to quickly control volume, bass/treble EQ, Bluetooth pairing, and for connecting headphones
• RCA inputs for connecting DJ gear or studio interfaces
• Output jack for connecting an optional subwoofer
• Magnetically shielded drivers allowing positioning near other equipment without any problems
• Rugged, matt black finish and the curved front edge design for stability and clean sound reproduction

TECHNICAL DATA
• Type: 2-channel bass reflex, active monitor speaker system
• Tweeter: 0.5'' tweeter (1.30 cm)
• Woofer: 3.5'' bass (8.89 cm)
• Frequency range: 80-20,000 Hz
• Amplifier power: Class A/B amplifier: 2 x 20 W RMS
• Magnetic shielding
• Inputs: 1 x line (RCA), 1 x wireless Bluetooth®
• Outputs: 1 x headphone monitor (3.5 mm jack), 1 x subwoofer (3.5 mm jack)
• Dimensions: 140 x 222 x 152.5 mm
• Weight: 6 kg (pair)
• Incl. loudspeaker cable (to connect from the left/right channel), mains cable, operating instructions
Damir Brand - Forty5
Damir Brand
Forty5 "GLAZED DONUT" Adapter
19,94 €* 20,99 € -5%
45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear numbered box

Material: PLA
Zomo - VS-Box Space
Zomo
VS-Box Space
75,99 €* 79,99 € -5%
The Zomo VS-Box Space is a modern storage solution for LPs. It convinces with its exceptional design and high quality. The surface is laminated with robust and water-repellent decor and available in the colours black, white, Zebrano and walnut. This piece of furniture is a definite eye-catcher in your living room.

Features

Capacity: 100-120 LPs
Exclusive design
Premium quality
Specifications

Dimensions: 460x400x370 mm
Weight: 3,7 kg
Reloop - RMX Innofader
Reloop
RMX Innofader
113,05 €* 119,00 € -5%
REVOLUTIONARY NON-CONTACT TECHNOLOGY
The internationally lauded Innofader by Audio Innovate is now retro-fittable to all Reloop devices that are identified as „Innofader Compatible“.

MORE THAN 4 MILLION CYCLES: OPTIMIZED FOR THE HARDEST SCRATCHING APPLICATIONS
The RMX Innofader has been specially developed to give users an effortless, professional performance even under the most rigorous use in the toughest conditions. Audio Innovate‘s revolutionary non-contact technology has created a fader that is perfect for the needs of professional DJs. The RMX Innofaders are accurately calibrated and ready for immediate use in any compatible Reloop product; however, the performance can also be personalised with the added ability to fine-tune the Cut-in and Cut-out points.

EASY AND QUICK MOUNTING
The RMX Innofader represents the utmost quality throughout its design. The fader shaft is grounded to protect the integrity of the audio signal, and the design is tested to work for 4 million movement cycles – ensuring a long and reliable lifespan. The Reloop RMX Innofader is quick and easy to install on the professional RMX-22i/33i/60/80 and RMX-90 DVS mixers. Inside the box, a blue performance fader cap is included to complete the package.

FEATURES
• Revolutionary non-contact fader (mini Innofader by Audio Innovate)
• Designed to last more than 4 million cycles
• Quick mounting
• Cut-in and cut-out points can be calibrated
• Buttery smooth operating tension for perfect scratching
• Factory pre-calibrated for tight cut points
• 3-pin adapter cable for Reloop mixers included
• Fader shaft with brush grounding for even more reliable applications
• Compatible with Reloop RMX-22i/33i/44 BT/60/80/90 and all future Reloop products with INNOFADER compatible logo
• Incl. blue fader cap

TECHNICAL DATA
• Dimensions: 72 x 14.5 x 17 mm
• Weight: 26 g

Manual:
https://www.reloop.com/media/custom/upload/Reloop-Calibration_PDF_RMX_innofader_Web.pdf
https://www.reloop.com/media/catalog/product/pdf/2/3/4/234052_Reloop_IM.pdf
Magma - Digi Beatpack L
Magma
Digi Beatpack L
106,40 €* 112,00 € -5%
Available Sizes:52 x 32 x 22 cm
The new DIGI BEATPACK L is a full-featured backpack that has been designed to move your DJ gear comfortably to any gig or event. Despite its ultra-low weight and compact design it offers a huge storage capacity for everything from production gear and a battle mixer, to small controllers or records. A sophisticated assortment of compartments offer thoughtful organization and quick access to your laptop, headphones, cables, and traveling accessories. The DIGI BEATPACK L is the ideal companion for any working DJ on the go.

Fits: 13-15‘‘ Laptop
Ableton Push 2
NI Maschine
NI Kontrol Z2
NI Kontrol D2
NI Kontrol X1/F1 (x 2 )
Pioneer DJM-S9
Rane Sixty-Two
12“ Vinyl & Accessories

Crafted from durable and 100% water-resistant 1680D Ballistic-Nylon

High-grade, water-repellent PVC zipper

Internal, fully-padded laptop sleeve up to 17”

Zippered document pocket

Two external quick-access pockets for small items and travel documents

Padded back panel with airflow system

Padded carrying handles and ergonomic backpack straps with chest straps

Hand luggage compatible

External measures (H/W/D): 52 x 32 x 22 cm / Inner measures (H/W/D): 46 x 31 x 16 cm (main compartment)
Vieta Pro - #PARTY Bluetooth Speaker 40W
Vieta Pro
#PARTY Bluetooth Speaker 40W
94,99 €* 99,99 € -5%
FEEL THE APPEAL OF POWER
Portable speaker with Bluetooth and True Wireless function.
Connect two speakers to the same smartphone and play music in stereo. #PARTY has up to 10 hours of battery life and features a microphone to answer, reject or end phone calls. With USB input, you can play music from your pen drive or simply use it as a powerbank. Thanks to IPX7 water resistance, the speaker can even be submerged in water. #PARTY has AUX-in so you can connect your devices via cable. The speaker is robust and stands out for its sound quality (up to 40W). Available in four colors: blue, black, pink and burgundy.

#PARTY WITHSTANDS EVERYTHING
Thanks to the speaker's IPX7 water resistance, you can take it to the shower, pool and to the beach. Even submerging it in water won't do the speaker any harm.

A TRUE EXPERIENCE
The True Wireless technology allows you to connect two #PARTY speakers from the same smartphone to amplify their power. A whole festival of sound worth listening to.

BIG WORDS
When you talk about power, quality, performance and efficiency, you're talking about the #PARTY speaker. Feel premium sound like you've never felt before.

MAIN FEATURES
• Portable speaker with Bluetooth, a lot of power and good sound quality
• IPX7 water resistance
• Integrated microphone to manage calls and interact with smartphone voice assistant
• Light system with three different themes
• USB input to play music from a pen drive or use as a powerbank
• True Wireless function to connect two #PARTY speakers to the same smartphone for twice the power
• Battery life of up to 10 hours
• Type-C charging connector
• Available in four colors: black, burgundy, blue and pale pink

IN THE BOX
• 1x #PARTY speaker
• 1x USB Type-C
• 1x Manual

SPECIFICATIONS
• Product height: 22 cm
• Product length: 8.8 cm
• Product width: 8.8 cm
• Product weight: 0.75 kg
• Sensitivity: 88dB
• Speaker type: Active
• Battery capacity: 5000mAh
Solid Cutz - PT Pyra Plate X One (Numark PT01)
Serato - Sacred Geometry III Control Vinyl
Serato
Sacred Geometry III Control Vinyl
52,24 €* 54,99 € -5%
Sacred Geometry is an exploration into existence as expressed through geometric shapes. A visual representation of the origins of life, the universe and our world. It all starts with a circle, the most perfect shape known to mankind: from it, life emerges. The sun, the moon, planets, circles are everywhere in the natural world, same for Serato, DJ's, the vinyl, a simple circle has become a fundamental tool in the control, creation and expression of our art.
Audio-Technica - ATH-AVC200
Audio-Technica
ATH-AVC200
37,04 €* 39,00 € -5%
Closed-back dynamic headphones
Entry-level closed-back headphones with comfortable fit for use with home audio and video systems. Offers high-quality sound for enhanced enjoyment of movies and music.

Features:
• Newly designed 40 mm drivers reproduce clear mid-low frequencies
• Adjustable headband support provides comfortable fit even during extended wear
• Large headband delivers comfortable and stable fit
• Contoured earpads fit naturally over ears to help to provide rich bass

Specifications:
• Driver Diameter: Closed-back dynamic 40mm
• Frequency Response: 20 - 22,000 Hz
• Maximum Input Power: 500mW
• Sensitivity: 100 dB/mW
• Impedance: 40 ohms
• Weight: 210g without cable
• Cable: 3.0m
• Connector: 6.3mm / 3.5mm gold-plated stereo plug
Glorious - Record Box 55
Glorious
Record Box 55
29,35 €* 30,90 € -5%
Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available as untreated wood edition or black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 355 x 340 x 210 mm
•Weight: 5 kg

Features
•Holds up to 55 12'' records
•Combination system: perfectly stackable with other •Glorious Record Boxes
•Optically matches the Glorious Mixstation and Mix Extension
•Available with black or white shrink-wrap finish
Reloop - RHP-15
Reloop
RHP-15
71,25 €* 75,00 € -5%
FEATURES
•Closed DJ headphones with high-performance 50-mm drivers
•Powerful sound optimized for DJs
•Sturdy construction for professional use
•Smart retractable construction for compact and safe transport
•Rotatable ear cups for flexible handling while DJing
•Comfortable and resistant head bracket with padding
•High-quality aluminium inlays with Reloop logo
•Comfortable ear pads for long DJ sessions
•Removable audio cable
•One-sided cable routing
•Gold-plated connections, incl. 6.3-mm adapter

TECHNICAL DATA
•Frequency range: 10 Hz - 20 kHz
•Impedance: 42 Ohm
•Acoustic pressure: 100 dB
•Maximum input: 2000 mW
•Connections: 3.5/6.3 mm jacks
•Weight: 310 g
•Incl. large carrying bag for headphones and accessories, cables, adapters
Serato x Lefto - Lefto Control Vinyl
analogis - Vinyl Trockenreinigungsarm Carbon
analogis
Vinyl Trockenreinigungsarm Carbon
17,09 €* 17,99 € -5%
The vinyl dry cleaner is equipped with a sticky bottom, so it's easy to handle on a record player. Thanks to the ground cable, the adjustable Vinyl Trockenreinigungsarm eliminates static charge.
Decksaver - Pioneer DJM-250
Serato - Control Vinyl Country
Serato - Control Vinyl Country
Glorious - 12
Glorious
12" Vinyl Frame Set (3 Pieces)
34,10 €* 35,90 € -5%
Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)
Decksaver - Rane TTM57mkII
Decksaver - Rane Sixty-Four
Decksaver - Rane Sixty-Two
Decksaver - Pioneer DJM-2000/2000NXS
Neo d+ - Audiokabel 2x 6,3mm Klinke symmetrisch (TRS) / 2x XLR-M, Class B, 1m Länge
Neo d+ - Audiokabel 2x XLR-F / 2x XLR-M, Class B, 1m Länge
analogis - Vinyl Reinigungstuch
Decksaver - Pioneer DJM-900NXS2
Reloop - Ersatznadel VIBE
Reloop
Ersatznadel VIBE
47,40 €* 49,90 € -5%
•Maximum contact with the record groove
•High output voltage for energetic, powerful sound
•Superb sound quality with flat frequency response

The Concorde VIBE is focused purely on achieving the highest possible sound quality from your records. The use of an elliptical stylus allows for maximum contact with the record groove, resulting in rich and detailed sound reproduction. The high output level and flat frequency response makes this cartridge ideal for club and studio use. Wherever you are, Hear the VIBE.

FEATURES
•Especially recommended for club and studio environment
•Special elliptical stylus
•Superb sound quality with flat frequency response
•Maximum contact with the record groove
•Very high output voltage for energetic, powerful sound
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency response: 20 Hz - 22 kHz +/-1,5 dB
•Output voltage (5cm/s): 8 mV
•Tracking force range: 2 - 5 g
•Recommended tracking force: 3 g
•Weight: 18.5 g
Serato - Emoji
Teenage Enginering - CA-X Case
Jesse Dean Designs - PT01 Carbon Fibre Handle
Jesse Dean Designs
PT01 Carbon Fibre Handle
8,54 €* 8,99 € -5%
Carbon Fibre Handle for your PT01.

3K weave glossy carbon fiber tube handle that can be easily installed into your Numark PT01 turntable range.

- Real carbon fiber

- No drilling required

- Easy install
Zomo - VS-Rack Wall
Zomo
VS-Rack Wall
37,99 €* 39,99 € -5%
The model Wall of the new Zomo VS Rack-series by Zomo is a new and groundbreaking option for vinyl storage. The robust yet lightweight construction made from powder-coated metal combines longevity and elegant design.
The product is designed for wall-mount but it can also be detached from the wall-fitting for transport.

Specifications

Measurements: 256 x 120 x 340 mm
Weight: 0,5 Kg
Capacity: 20-30 LPs
Kid Cudi - Man On The Dark Side - Single Slipmat
Kid Cudi - Day 'N' Nite - Single Slipmat
Kid Cudi
Day 'N' Nite - Single Slipmat
14,24 €* 14,99 € -5%
The graphics from his breakout single, printed on a high quality 16oz glazed bottom slipmat.
OFWGKTADGAF - Collective Slipmat
Neo d+ - Audiokabel 2x XLR-F / 2x 6,3mm Klinke symmetrisch (TRS), Class B, 1m Länge
Zomo - VS-Box Divider
Zomo
VS-Box Divider
33,24 €* 34,99 € -5%
The Zomo Divider is an optional accessory for the Zomo-VS-Boxes and the deckstand Vegas. It can be used to divide the LP-compartments into four sub compartments for cds and dvds.

Features:
• Extension of the Zomo VS-Boxes series with CD and DVD compartments
• Capacity: 40 - 80 CDs or 20 CDs + 20 DVDs
• Material: MDF wood fibreboard
• Unique design
• High-quality workmanship
• Great optics

Specifications:
• Dimensions: 329 x 319 x 339 mm
• Weight: 3 kg

Suitable for the following Zomo products:
• Zomo Deck Stand Vegas
• Zomo VS-Box 100
• Zomo VS-Box 100/2
• Zomo VS-Box 100/4
• Zomo VS-Box 200
• Zomo VS-Box 200/2
• Zomo VS-Box 400

Format:
• 7" Singles
• CDs
• LPs
Zomo - VS-Box 50
Serato - 7
Decksaver - Rode Rodecaster Pro
Afromats - Planets Slipmat
Lou Reed - Transformer - Single Slipmat
Lou Reed
Transformer - Single Slipmat
14,24 €* 14,99 € -5%
The Lou Reed "Transformer" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.
Naan - Shredded 3 Slipmat
Naan
Shredded 3 Slipmat
14,24 €* 14,99 € -5%
The Naan Shredded 3 Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. Weight: 450 g; 2 mm thick. 100% polyester felt.
Damir Brand - Forty5
Damir Brand
Forty5 "Diggin' You" Adapter
15,19 €* 15,99 € -5%
45 rpm adapter for large hole 7″ records

Individual adapter comes in clear box

Mint conversation heart with hand painted red letters

Material: PLA
The Harder They Come - Movie Poster - Single Slipmat
The Harder They Come
Movie Poster - Single Slipmat
14,24 €* 14,99 € -5%
The The Harder They Come "Movie Poster" Slipmat is made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.
Innovative Leisure - iL Slipmat
Wex - Wex Black Logo Slipmat
Wex
Wex Black Logo Slipmat (2 Pieces)
18,99 €* 19,99 € -5%
The Wex Logo Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree. By the way, this is a set of two slipmats.
Back To Top
Tracklist
Tracklist
Close Player