Winyl Advanced Cleaning Gel (500ml)

Winyl Record Cleaner is a Gel Cleaner for vinyl records developed for Chemist and Collectors. It performs a film cleaning system ensuring a professional result, getting to the deepest grooves trapping and extracting stubborn dirt

Apply the gel and press slightly to let Winyl penetrate into the vinyl grooves. Let it dry, the gel will become a film covering the record surface. Extract the film, dirt will be removed with it. Our vinyl record will sound much better than before.

Why use it?
It is as effective as a vacuum machine but with a lower cost. Each vinyl record needs a different cleaning depending on the type of dirt and the user requirements.

Winyl Gel extracts the stubborn dirt, it does not move it. Also, its cleaning system does not produce any friction or wear on the vinyl surface. You will discover if the annoying sound was caused by dirt or from usage with the turntable needle.

Results
Winyl removes the dirt and dust that causes unexpected noises, clicks and pops. It takes away the troublesome static electricity accumulated on the surface. The film cleans the most difficult areas such as the groove sides, improving the low and high frequencies. The final result is a clear and faithful reproduction and a fine listening experience in High Fidelity.

Composition
Winyl Gel is composed for 2 synthetic polymers, non ionic surfactants, antistatic agents, wetting agents, cleaners, conserving agents and more to obtain the best results.

All its components have been designed and tested to don´t change the vinyl surface. Winyl can be used in the same disc over and over without damage.

Video: https://youtu.be/uv_xVVjaZkw

Manual: http://www.winylcleaner.com/gallery/english%20guide.pdf

Discover the Winyl cleaning gel system. In 4 steps your vinyl records will be recovering their brilliant and pure sound

DOSAGE
The recommended amount for a 12" LP is 15 ml. With the help of the syringe dispense the liquid in zig-zag evenly across the vinyl surface. For 7" the amount is 6 ml.

APPLICATION
Using a finger and making a slight pressure distribute the liquid homogeneously. Ensure that the entire surface is covered except the edge.

DRYING
Place a piece of paper over the liquid, half of it inside the vinyl and the other half outside. Leave to dry. Drying time depends on temperature and humidity.

EXTRACTION
Slowly pull the paper to remove the film. It must be removed in one single piece. The vinyl will have been cleaned and offering their best sound.

Made In Spain