Gift Ideas for Vinyl Lovers 177 Items

Ortofon’s new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analyzing cartridge performance as well as its interaction with your tonearm and turntable.

Before testing your cartridge, please verify the HiFi system’s functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room.
The Test Record is designed to be played through your system with in-built RIAA equalization. Volume control is recommended to be set at a moderate signal level.

Please refer to your turntable and tonearm’s instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and antiskating according to the cartridge’s recommended technical data, and adjust stylus overhang.

The new 15-track fine pressing

Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15:

1. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
2. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
3. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
4. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
5. Reference tone 1000 Hz 5 cm/sec rms Left
6. Reference tone 1000 Hz 5 cm/sec rms Right
7. Reference tone 1000 Hz 5 cm/sec rms Left
8. Reference tone 1000 Hz 5 cm/sec rms Right
9. Tracking ability, lateral 50 ?m peak
10. Tracking ability, lateral 60 ?m peak
11. Tracking ability, lateral 70 ?m peak
12. Tracking ability, lateral 80 ?m peak
13. Tracking ability, lateral 90 ?m peak
14. Tracking ability, lateral 100 ?m peak
15. Square Wave Form 2.7 msec duty cycle 3:7
* The record has a constant velocity amplitude throughout the sweep.

1-4 Frequency sweep – a tool for checking frequency response
There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep.

5-8 Reference tone for testing channel output
With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable.

9 -14 Tracking ability test, 315 Hz lateral modulation
These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micrometers. Please refer to your cartridge’s tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilized. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained.

15. Square Wave Form 2.7 msec duty cycle 3:7
When monitoring the output of your cartridge with an oscilloscope you’ll then see a square wave located precisely above each other if the connection from the cartridge is correct.

After successful completion of the above test procedures, you can ensure that your cartridge is optimized. Still the human ear is very sensitive to difference in tone distortion; its level depends on the stylus condition and record wear.

To maintain optimal sound reproduction and to minimize wear on your records as well as on your stylus, we recommend the following procedure before and after each playback:
• Remove dust carefully from record surfaces by using a fine antistatic brush or cloth before every use.
• Please remember to remove dust from the diamond tip before and after playback of each record
• I order to keep electrical contacts clean and to lubricate the knurled nut on the tonearm, Ortofon recommends occasionally a light spray of contact cleaner like DeoxIT ®Gold G-Series into the tonearm socket.

It should be noted that some phono equalizers may generate some tone distortion, which cannot be referred to the cartridge.

User Guide: https://www.ortofon.com/media/148619/ortofon-test-record-user-guide.pdf

Due to their low weight and the option of one-ear listening, the HD 25 headphones are indispensable for mobile monitoring. The closed-back HD 25 are purpose-designed, professional monitoring headphones offering high attenuation of background noise.

Capable of handling very high sound pressure levels and of extremely robust construction, these headphones perform exceptionally well in loud environments, e.g. ENG, sound reinforcement, studio monitoring and audio equipment testing. Ideal monitoring headphones for cameramen and DJs, these are a pair of true sound professionals’ working headphones.

FEATURES

High sensitivity due to lightweight aluminium voice coils

Capable of handling very high sound pressure levels

Very lightweight and comfortable, even if used for long periods of time

Tough, detachable, single-sided cable

Rotatable capsule for single-ear listening

WHAT'S IN THE BOX?

1 HD 25
1 Screw on jack adapter 3.5 to 6.3 mm
HD 25 Plus only: 1 Pouch
HD 25 Plus only: 1 additional pair of soft earpads
HD 25 Plus only: 1 additional 1.5m straight cable

760 g layer weight to stabilize vinyl records.
Ø 70mm

The 2M Series is developed in conjunction with the Danish Industrial designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a record’s surface, the 2M’s handsome elegance establishes a great combination of form and functionality.

The name 2M was selected from among several ideas. We wanted a modern name that would be easy to pronounce and remember, and therefore an alphanumerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

Of course the 2M isn’t just another pretty face. It has been engineered to the highest standards and is congruent with Ortofon’s unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges features Ortofon’s trademark split pole pins, an invention that enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.

We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.

2M Blue features:

• an improved engine, which provides an increased output of 5.5mV and an optimized sound reproduction and a high level of sonic accuracy

• Nude Elliptical diamond and split pole pins with a copper wire

• The cartridge body is manufactured from Hopelex, an environment-friendly material which ensures high rigidity while eliminating unwanted resonances

2M Blue adds more dynamics and resolution, sounds more open and reproduces more details than 2M Red

Output voltage at 1000 Hz, 5cm/sec. - 5,5 mV
Channel balance at 1 kHz - 1,5 dB
Channel separation at 1 kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at - 3dB - 20-25.000 Hz
Frequency response - 20-20.000 Hz + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force - 80 µm
Compliance, dynamic, lateral - 20 µm/mN
Stylus type - Nude Elliptical
Stylus tip radius - r/R 8/18 µm
Tracking force range - 1,6-2,0g (16-20 mN)
Tracking force, recommended - 1,8 g (18 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 1,3 kOhm
Internal inductance - 700 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 150-300 pF
Cartridge colour, body/stylus - Black/Blue
Cartridge weight - 7,2 g
Replacement stylus unit - 2M Blue (interchangeable with 2M Red and 2M Silver)

Each of the 2M Series cartridges has its own individual sonic expression, and all five models together represent the ensemble of five classic variations:

• 2M Mono SE, 2M Mono and 2M 78 are a true mono cartridges for playing mono vinyl records
• 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth
• 2M Blue adds more dynamics and resolution, sounds more open and reproduces more details
• 2M Bronze adds even more details and resolution but in a very evenhanded way that pays respect to all elements
• 2M Black is the best of everything, true to the groove with resolution and accurate insight into each recording

Made from high-end cork, Glowtronics Cork Slipmats are preferred in high end audiophile vinyl listening since these absorb vibration well and static electricity gets reduced for a better listening experience. Besides that,

Glowtronics Cork Slipmats - Specifications:

• Material: Cork
• Weight: 41 g
• Dimensions: 30 cm Diameter
• Thickness: 3.175 mm
• Bottom Surface: Plain surface
• Grade: Strong High Quality
• Feel: Dense / Firm
• Purpose: High Quality Audiofile Vinyl Listening

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

"The Brown Bomber" Seductive, sturdy and breathtaking. Handcrafted Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:
• Height 36.83 cm / 14.5 inches
• Width 34.30 cm / 13.5 inches
• Length 36.70 cm / 14.4 inches
• Weight 8.4 kg / 18.5 lbs.
• Holds up to 65 records

Sourced and crafted in Europe!

We like to call her, "Blondie". You can paint her, stain her, or just leave her as is, "Blondie" will be there, holding your wax and looking good. She is a true all rounder, not only to store your records, but to enhance the decor of your music space. It's perfect for a newcomer who is just building their collection. Or, for the advanced collector, who may be looking for an aesthetically robust "current rotation" box.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful Birch Plywood Music Box is constructed from 12 ply Birch Plywood. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:

Height 36.83 cm / 14.5 inches

Width 34.30 cm / 13.5 inches

Length 36.70 cm / 14.4 inches

Weight 7.6 kg / 16.7 lbs.

The Zomo VS-Rack Studio is a practical, elegant and portable vinyl storage solution made of metal in a modern and unique design. The vinyl stand is a decorative element and a great eye-catcher in every home.
Particularly practical: by simply turning the stand over, it can be used in two different ways. Once each LP is separated individually by the lamellae or all vinyls in one piece for easy leafing through.
The material is made of powder-coated steel and combines durability with timeless design.

Features:
• offers space for 50-75 LPs (depending on the thickness of the records)
• innovative and elegant design
• can be used in 2 different ways - simply turn the stand upside down for a new function
• made of powder-coated metal
• robust and durable
• high quality from Zomo

Technical specifications:
• Dimensions (L x W x H): 206 x 346 x 456 mm
• Weight: 4,2 kg

Electric needle cleaner for record players
The Flux-Sonic needle cleaner is designed to gently, safely and quickly remove dirt from the turntable needle with the help of targeted vibrations. Targeted vibration ensures residue-free cleaning. It is not necessary to remove the sampling needle. The application is simple and works on any turntable. Flux-Sonic can be used as often as you like. It is recommended to use it before each play. The cleansing fluid FLUX-Fluid is also available individually in 15ml vials. Rediscover your record collection!

• Cleans and cares for your valuable pickup
• Quick and easy to use
• Minimizes sampling noise
• Improves the scanning capability of the pickup
• Increases the life of the scanning needle
• Increases sound quality
• 3-year warranty
• Weight: 0.05 kg
• Size: 20 x 12 x 6 cm

History
The history of vibration needle cleaners goes back to the 1970s. There were devices from various companies which, at high frequency, transmitted through a liquid, detached the contamination of the needle. After the release of the CD and falling turntable sales in the 80s and especially in the 90s, these devices disappeared from the market. Unfortunately for many record listeners, this was not reissued due to the high cost. FLUX-HiFi took up this idea with the SONIC and developed the technology anew. The result is fantastic!

The cleaning
The stylus is the primary component in the playback process. The movement by which tension is later induced arises here. The goal is to exactly follow the groove in the micrometer range. In order to achieve this perfectly, the manufacturers of pickups make great efforts. However, if the needle is dirty, the diamond , no matter how polished and ground it is – cannot exactly follow the deflection. It reacts too early or too late, distortions occur. Even supposedly clean records are covered with dust, partly visible, partly invisible in the groove. It contains particles of silicates, polymers and organic matter. These stick to the needle due to the high temperature during the scanning process. How quickly this happens is in Fig. 1. Already after playing a record side, almost nothing is recognizable from the needle in front of dirt. Figure. 2 shows the needle after cleaning with a normal, dry needle brush. Fibers are removed, but the encrustation remains. Only an aggressive liquid cleaner provides a reasonably cleaned surface of the diamond, see fig. 3. However, since these cleaners can attack not only the glue of the diamond, but also, above all, the sensitive rubber parts of the suspension of the needle carrier, caution should be exercised here. Figure. 4 shows the needle after applying the Flux-Sonic. Without attacking parts of the pickup, the result is excellent. The needle shines in a new splendour. (Fig. 1-4 )

The technology
The principle of action is similar to that of an ultrasonic cleaner from dental technology or an ultrasonic bath for spectacle lenses. A strong high-frequency vibration ensures a cleaning of the surfaces. Some substances, such as aluminium, are damaged by ultrasound treatment. Even if the diamond were perfectly cleaned, the glue nubs and the suspension of the needle carrier would be damaged, as would the use of aggressive liquid cleaners.
The FLUX-Sonic vibration cleaner, on the other hand, operates at a low frequency. The circuit and mechanics are designed to have a three-dimensional vibration on the needle, ensuring that any dirt particles are removed. The frequency is precisely tuned in such a way that damage to the adhesive or suspension is excluded – but the cleaning result is maximum. The deflections are far from the values of the actual sampling. The movement of the needle thus corresponds only to a fraction of the load of the play-off process.
A liquid is required to transfer the vibration from the device to the needle. This has an additional, gentle cleaning effect and is produced on an isopropanol basis. After application, it evaporates without residue. Flux fluid is applied on a specially designed pad made of the finest PE fibers. Already these fibers produce a capillary effect, which is very similar to the effect of a liquid, due to their number and the resulting density. In combination with FLUX-Fluid, the result is a perfect combination that transmits the vibration and absorbs the dirt at the same time. The application is recommended before each play.

The result
The cleaning process takes only 15 seconds, then the optimum is already reached. The scanning capability of the pickup system is improved. Less abrasion also increases the lifespan of the needle. Scanning noise is significantly minimized. Soundfully, the difference is outstanding. Both distortions and annoying side noises have largely disappeared. Playback has become much more dynamic and enjoyable. Unpleasant tips are no longer present and even the largest controls are rendered without distortion. The frequency range seems to be extended, especially in the bass and altitude range. As well as cleaning the needle, the cleaning of the record is of course also very important. Make sure that records are as clean as possible. A Flux-Hifi device is already in development.

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

VMN20EB
REPLACEMENT STYLUS FOR VM520EB
Elliptical Bonded stylus
Bonded Round Shank construction
Blue

taunus 1.2 | com fi | deep blue

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: water-repellent cotton canvas w/ leather buttons
colour: deep blue
size: 48 x 38 x 8 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

LP Winkel im Doppelpack 2er Set aus Kunststoff für 80 LPs

317 x 317 x 160 mm

Schrauben für die Wandmontage sind nicht im Lieferumfang enthalten.

The vinyl dry cleaner is equipped with a sticky bottom, so it's easy to handle on a record player. Thanks to the ground cable, the adjustable Vinyl Trockenreinigungsarm eliminates static charge.

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

This book reveals the remarkable history of a company that for 100 years has always been in the business of acoustics. Indeed, for that timespan, Denmark itself, has been recognised as the land of acoustics, with many companies designing innovative products. The country retains that reputation today.

Ortofon has played a significant role in creating a rich heritage for Danish acoustics. We believe that enviable legacy is best protected and continued by the development of exciting new products and keeping Ortofon viable for the future. As you will discover in the book, the list of Ortofon’s famous and groundbreaking products is a long one.

Music historian Kevin Howlett has written this history of 100 years of Ortofon based on a firm foundation of exhaustive research in various archives and in-depth interviews with past and present employees from the 1970s until now. We are indebted to all the many friends and colleagues who gave so generously of their time to contribute to this book.

The complete, definitive and never-before-published catalogue of Hipgnosis, Vinyl
• Album
• Cover
• Art finally does justice to the work of the most important design collective in music history, which, according to Roddy Bogawa, director of the documentary Taken by Storm (2011), ‘designed half your record collection’.

Founded in 1967 by Storm Thorgerson, Aubrey ‘Po’ Powell and Peter Christopherson, Hipgnosis gained legendary status in graphic design, transforming the look of album art forever and winning five Grammy nominations for package design.

Their revolutionary cover art moved away from the conventional group shots favoured by record companies of the day, resulting in the ground-breaking, often surreal designs which define the albums of many of the biggest names in the history of popular music: 10cc, AC/DC, Black Sabbath, Peter Gabriel, The Police, Genesis, Led Zeppelin, Pink Floyd, Paul McCartney, Robert Plant, Syd Barrett, Throbbing Gristle, T. Rex, Wings, Yes and XTC, to name but a few.

Arranged chronologically, Vinyl
• Album
• Cover
• Art features stunning reproductions of every single Hipgnosis cover – 372 in total – coupled with detailed information by Po and Storm Thorgerson on the artworks and the compelling stories behind their creation. Additional contributions by Peter Gabriel, Marcus Bradbury, and Pentagram’s Harry Pearce provide engrossing insights into the way these incredible artworks came into being; place the covers in context; and reflect on their enduring impact on album design.

The number 1 turntable weight used by Dj's in the world!

MasterSounds x HHV turntable weights are carefully designed to reduce a turntable’s noise floor and thus improve the musical soundstage. Users enjoy improved bass response, tighter mids and controlled highs as the turntable weight reduces unwanted resonance when placed via the spindle on top of a record. MasterSounds x HHV turntable weights weigh just over 400 grams (+/- 14oz), light enough to not cause damage to a turntable’s bearing system, but heavy enough to give sonic improvement.

MasterSounds x HHV weights have been tested on a large variety of non-suspended belt drive and direct drive turntables with great success. Pressing plants try to achieve quality control on every record made, however there are intrinsic issues such as dished and warped records. MasterSounds x HHV turntable weights help to combat this too. DJs love this; as it aids cueing a problematic a record prior to mixing and eliminates needle skip.

It was developed an anti-slip base for MasterSounds x HHV weights, and thus each turntable weight has been designed to grip the record, which is fantastic for DJ’ing as it really stabilises records in the mix. Use MasterSounds x HHV turntable weights for a couple of weeks then remove to realise what a difference they make!

• Satin black with black HHV graphic
• Hand-brushed finish
• Premium quality turntable weights developed for club and home use
• Hand made in quality aluminium, limited "edition" numbers
• Simply pop a record on your turntable and place the turntable weight over the spindle to enjoy a wider, deeper sound stage with extended bass and improved sound throughout the frequency spectrum
• Stabilises your record when playing in a club, bar or at home
• Less needle skip
• Rubber anti-slip base
• Supplied in velvet style pouch for transport
• 80mm diameter X 41mm high
• ca. 400g

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - Paprika Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Disc Flatter is long seller product and our signature item.This product flattens warped discs and returns them to
their original condition in just a few hours with automatic heating temperature adjustment function.

DF-01iA is the basic model and supports the disc has groove guard.

How the Disc Flattener Works.
Analog discs are made from polyvinyl chloride, commonly known as vinyl. Because of sensitivity to heat, the storage method you use for your analog vinyl records is important to avoid warps and other damage. Aging can also cause warping of vinyl records, and extra care should always be taken. By gently heating the record evenly and with a uniform pressure the vinyl can be returned to its original flat state without degrading the audio quality. Please note that SP records , heavy weight records, and flexi discs (also known as phonosheet or sooundsheet records) are not supported.

The Structure of Disc Flattener.
The Disc Flattener has semiconductor film applied in the top and bottom heaters of the unit allowing for a uniform heating process combined with an even pressure.

Specifications:
• Energy consumption : 160W
• Size : W：471mm
D：93mm
H：493mm
• Weight : About 11kg
• Environmental conditions used : Indoor normal temperature
(No condensation)
• Humidity : 20%～90%
(No condensation)
• Country of manufacture : Made in JAPAN

AT-LPW30TK
Manual Belt-Drive Wood Base Turntable

• Teak effect wood veneer finish
• Connect directly to speakers at home with the built-in phono preamplifier
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminium platter with rubber mat
• AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge

Video: https://www.youtube.com/watch?v=gmWsctJ8Kzk

Goldring E3

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Violet
• Cantilever: Aluminium
• Stylus profile: Elliptical
• Stylus radius: 0.3 x 0.7 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

After several years of requests from the vinyl loving community, Music Box Designs is proud to present our latest vinyl storage line: The 7 inch vinyl storage Music Box.

And, in honor of the late Pete Shelley we have decided to refer to these beauties as ‘Singles Going Steady.’

In 1949, RCA Victor unveiled its latest invention, the 45 rpm 7 inch Vinyl Record in an effort to compete with Columbia Records newly developed 33 1/3 12 inch disc. Time constraints aside, what RCA unleashed on the world of recorded music was the perfect vehicle for the burgeoning youth market, who could now easily own the latest musical dispatches from their favorite artists, in a convenient and affordable medium.

Seventy years later, the 45 or 7 inch record has remained a staple of the vinyl collecting community. From highly valuable pressings of the world’s greatest songs to rare independent recordings of artists utilizing the format to put out “non-album” outtakes or live recordings as a gift for their fans, the 7 inch collector is a dedicated and specialized breed and they deserve to store those precious discs in the best way possible. And as with our 12 inch Vinyl Storage boxes, we have designed what we believe to be the most beautiful, and durable 7 inch storage available.

Our 7 Inch Vinyl Storage Music Box has been constructed of the same edge glued Oak of our 12 inch Music Boxes. The 45 degree mitered joints have been reinforced by an internal series of wooden dowels for even greater structural integrity. The internal dimensions of the Music Box have been carefully considered to allow for a perfect fit of single records and even some 7 inch box sets. The tops of the records do not stick out, so it is possible to stack the boxes on top of each other, and the convenient handles make moving our 7 inch Music Box easy as pie.

Can hold up to 138 7 inch records.

External Dimensions:
• Height- 21.3cm
• Length- 30 cm
• Width- 23.1 cm
• Weight: 2.76 kg

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

We are in the middle of one of the greatest periods in music packaging. Collectible packaging is back at the cultural vanguard: physical records are coveted by millennials, and hip clothing outlets devote massive amounts of space to record players and racks of LPs.

Album Art profiles thirty-three designers at the forefront of this movement, among them Braulio Amado, Chris Bigg, Brian Roettinger and Jonathan Barnbrook. They reveal and analyse the creative process behind each design, offering exclusive insights into how they are able to elevate the simple record cover into something more, something special, something unique, something memorable. Exclusive interviews with some of the biggest names in the field, including Stefan Sagmeister and Paula Scher, accompany the profiles. The designers aren’t the only stars of the show – the book reproduces and discusses sleeve designs for such artists as David Bowie, Tame Impala, Kesha, Kim Deal, David Sylvian, The Flaming Lips, Queens of the Stone Age, and more.

Packed with innovative artworks by one-of-a-kind designers, this is the definitive guide to album cover design in the 21st century.

Motown: The Sound of Young America is the definitive, beautifully produced visual history of Motown, the most successful independent record company in the world.

Motown became a prolific and hugely successful production line of suave, sassy and sophisticated music through the 60s, 70s and 80s. This exceptional book features extensive specially commissioned photography of treasures gathered from the archives. It also captures the graphic and design iconography that underpinned Motown’s extraordinary creativity.

Packed with fresh insights gleaned from scores of interviews with key players, this revealing book delves into the workings of the Motown machine and details how a dedicated team of backroom believers, white and black, turned a small family business into a popular music powerhouse. This was the home of Stevie Wonder, Smokey Robinson & The Miracles, Diana Ross & the Supremes, Marvin Gaye, The Jackson 5, The Temptations and many more.

Motown: The Sound of Young America is a spectacular labour of love befitting an incredible story.

Awarded a Certificate of Merit in the category of Best Historical Research in Record Labels, from the Association for Recorded Sound Collections Awards for Excellence 2017

Finally, a brilliant exploration of the German rock band Can's monumental 1971 album Tago Mago.
Tago Mago is a hugely unique and influential album that deserves close analysis from a fan, rather than a
musicologist. In this officially approved account of one of the most influential and powerful albums of the 1970s, Scottish novelist Alan Warner details the
concrete music we hear on the album as well as how it was composed,
executed and recorded—including the history of the album in terms of
its release, promotion and art work. Warner includes a backtracking of
the history of the band up to that point and also some description of Can's unique recording approach taking into account their home studio set up. Yet this tale of Tago Mago is more than just a history of the band; it is also the tale of a young man obsessed with record collecting
in the dark and mysterious period of pop music before Google.
Through a combination of Warner’s own experiences and interviews with the two surviving members of the band (drummer Jaki Liebezeit, keyboardist Irmin Schmidt and bassist Holger Czukay) Can’s Tago Mago
is a hilariously personal and illuminating picture of one of the biggest names in experimental rock.

160 pages, paperback.

Limited to 100 copies, exclusively for HHV. The Apostles were a renowned Nigerian funk/soul group from the city of Aba (an epicenter for music during the 70s & 80s) and disciples of the heavy psychedelic soul/rock fusion style...for over forty years, they have stood as the jewel in the crown of the Afrobeat genre in Eastern Nigeria and champions of its flourish ing post-war music scene. Since their formation in 1973, the band has turned out memorable perf ormances in a variety of styles including rock, soul, funk, pop and reggae. The Apostles amassed a large following, enjoyed an immense success throughout Nigeria and went on to release multiple albums. Although most of their songs are sung in English, a few of their songs are also sung in Igbo. The Apostles became superstars on the strength of several hit singles and have been preaching a particular blend of funky psychedelic soul/rock fusion for over 40 years. The LP we are presenting you here
Black Is Beautiful (1977) is one of the most enjoyable albums of the Afrobeat era: proud, assured, relaxed and extremely powerful. Black Is Beautiful contains a heavy mix of wailing guitars, swirling funky organ sounds and James Brown-style vocals. It is one of their best albums (also one that became a fixture in many East Nigerian homes) and an essential Afro-Funk record to add to your collection. Today we are proud to present to you the first ever vinyl reissue of this rare Nigerian album originally released on EMI Nigeria in 1977. This reissue is now available as a deluxe 180g vinyl edition featuring the original artwork

Nominated for a Grammy!

Following their hotly tipped 2018 debut album “On” – Altın Gün returns with an exhilarating second album. “Gece” firmly establishes the band as essential interpreters of the Anatolian rock and folk legacy and as a leading voice in the emergent global psych-rock scene. Explosive, funky and transcendent.

The world is rarely what it seems. A quick glance doesn’t always reveal the full truth. To find that, you need to burrow deeper. Listen to Altın Gün, for example: they sound utterly Turkish, but only one of the Netherlands based band’s six members was actually born there. And while their new album, Gece, is absolutely electric, filled with funk-like grooves and explosive psychedelic textures, what they play – by their own estimation – is folk music.

AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)

• Direct-drive, DC servo motor
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33/45/78 RPM speeds
• Convert records to digital files via the USB output
• Professional anti-resonance, die-cast aluminium platter with felt mat

Specs:
Turntable

• Type fully manual
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM, 78 RPM
• Pitch Variation +/-8% or +/-16%
• Turntable Platter Die-cast aluminum
• Starting Torque >1.0 kgf.cm
• Braking System Electronic brake
• Wow and Flutter <0.2% WRMS (33 RPM)
• Signal-to-Noise Ratio >50 dB
• Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• USB Function PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 141,6 x 452 x 352 (H x W x D mm)
• Weight 8.0kg
• Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter

Cartridge & Stylus
• Replacement Stylus VM95 Series

Video: https://www.youtube.com/watch?v=eXcgF2SY35Q

Analogue HiFi Turntable for Audio Purists

The TURN 2 HiFi turntable is for vinyl purists wanting to immerse themselves in the world of analogue listening pleasure. Vinyl enthusiasts can start using the turntable straight away thanks to the pre-installed, elliptical cartridge from Ortofon.

Smooth belt drive & low-noise DC motor

The precise belt drive on the TURN 2 ensures a consistent platter speed with minimal wow and flutter. The built-in, low-vibration DC motor is extremely quiet meaning the TURN 2 can be ideally set up in listening environments or living rooms. The integrated motor control can be conveniently switched between 33 1/3 and 45 RPM using the speed selector switch, which is located underneath the chassis in keeping with the player’s minimal styling.

Static balanced, straight tone arm with optimal tracking performance

The TURN 2 is fitted with a static balanced, straight tone arm, with an angled headshell and Ortofon cartridge that sits perfectly in the groove of the record. The manual tone arm lift allows the needle to be precisely lowered onto the record. The anti-skating mechanism ensures the best possible tracking performance.

Flexible Headshell Connection

The headshell connection makes TURN 3 a really flexible performer. The GM/SME locking mechanism allows for easy switching between pick-up cartridges mounted on different headshells.

Classy, matt slimline housing with high-quality terminal

Alongside the connection for the external DC power supply, the rear of the TURN 2 features two gold-plated, corrosion-resistant RCA connections and a separate earth connection to prevent the possibility of ground loops. All cable connections are removable, allowing for easy replacement or later upgrade. The heavy MDF plinth has an extremely slimline design and is available in a matt black, red or white finish. A high-inertia die cast aluminium platter with chrome edging harmoniously rounds off the elegant design of the TURN 2.

FEATURES
•Belt-driven Hi-Fi turntable
•Factory fitted with Ortofon OM10 cartridge
•New straight tonearm design with optimal tracking performance
•Manual arm lift
•Low vibration DC motor
•Integrated motor control with Speed-Switch for conveniently selecting
two different speeds 33 / 45 rpm
•External DC power supply
•Die-cast Aluminum Platter with chrome edging
•Anti-Skating Wheel-System
•Gold-plated, corrosion resistant connections (all cables detachable)
•Slim-line wooden Plinth with mat black finish
•Convenient power switch at the side bottom
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

TECHNICAL DATA

Turntable Section:
•Type: Belt-Driven Analogue Turntable System
•Drive: Belt drive
•Motor: DC Motor
•Turntable Speeds: 2 speeds (33 1/3, 45)
•Wow and flutter: 0.2% WRMS
•S/N Ratio: >65 dB (a-weight)

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 300 mm
•Weight: 550 g

Tonearm Section:
•Type: Static Balanced Straight Tonearm
•Effective Length: 224 mm
•Overhang: 19 mm
•Tracking Error Angle: 25°
•Tracking Force: 1.5 g
•Applicable Cartridge Weight: 4~6 g (incl. headshell 14~16 g)
•Anti-Skating Range: 0 – 3 g

Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal General:
•Power supply: DC 12 V, 500 mA
•Power Consumption: 6 W
•Dimensions: 420 (W) x 340 (D) x 121 (H) mm (incl. Dust cover)
Weight: Approx. 4.6 kg

Included Accessories:
Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshell

Direct Drive HiFi Turntable System

With TURN 5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

Powerful DC motor & low-resonance die-cast platter

The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN 5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

Static balanced S-tone arm & Hi-tech Ortofon cartridge system

The TURN 5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium.
The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

High-quality control elements & connections

The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN 5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups.
On the rear panel of the TURN 5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

Elegant design in a particularly heavy-duty construction

The housing is built on a heavy-duty metal construction with shock-absorbing feet in order to isolate unwanted vibrations as much as possible and reduce ambient noise. The combination of several materials provides additional stiffness to the housing.
With its deep black piano finish, visually the TURN 5 is elegant and timeless. The gold-plated turntable hovers harmoniously above the cover plate and focuses the view on the important thing – the record.

FEATURES
•Quartz-Controlled HiFi turntable with high torque
•Brushless Direct Drive DC Motor
•Precision machined Die-Cast Aluminium Turntable Platter for a perfectly balanced rotation
•Deadening Rubber covering rear platter surface & special 5mm rubber mat for optimized resonance control and damping
•Static-balanced S shaped tonearm with VTA adjustment
•Adjustable anti-skating dial for improved cartridge tracking
•Pre-installed Ortofon 2M Red cartridge
•Integrated motor control selector for conveniently selecting three different speeds (33, 45 and 78 RPM)
•Universal Headshell Connector provides added flexibility
•High Quality Phono outputs (with separate grounding connection)
•Gold-plated, corrosion resistant audio outputs (power and RCA cables detachable)
•Sunk-in terminal cavity for protected connection
•Especially heavy metal construction, rigid cabinet design and Shock-resistant feet for effective decoupling
•Supplied counterweight supports a wide variety of cartridges
•Elegant design with deep black Piano Finish and a fully gold anodised Platter
•Included Accessories: Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

TECHNICAL DATA

Turntable Section:
•Type: Direct Drive Manual Turntable System
•Drive: Quartz driven upper-torque direct drive
•Motor: 16 pole, 3 phase, brushless DC motor
•Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
•Starting Torque: 4500 g/cm
•Start-up time / rpm change: less than 0.2 sec.
•Wow and flutter: 0.01% WRMS
•S/N Ratio: More than 55 dB (DIN-B)
•Brake system: electronic brake

Turntable Platter:
•Material: aluminium die-cast
•Diameter: 332 mm
•Weight: About 1.8 kg (including rubber mat)

Tonearm Section:
•Type: Universal Static Balanced S-Shaped
•Effective Length: 230 mm
•Overhang: 15 mm
•Tracking Error Angle: Less than 3 degree
•Offset Angle: 22°
•Stylus Pressure: 0 - 4 g
•Adjustable Tonearm Base (VTA): 0-6 mm
•Applicable Cartridge Weight: 3.5~8.5 g (including headshell is 13~18 g)
•Anti-Skating Range: 0 – 3 g
•Effective tonearm mass: 20 g (incl. headshell)

Terminals:
•1x PHONO Out (gold-plated), 1x GND Earth Terminal
General:
•Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
•Power Consumption: 9 W
•Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
•Weight: approx. 12.8 kg

Included Accessories:
•Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, power cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your favorite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy plastic construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favorite records in style.

Technical Data
•External dimensions: 236 x 14 x 236 mm (L x H x W)
•Internal dimensions: 178 x 178 mm
•Weight: 378 g (1 frame)

Features
•3x vinyl cover frames for 7'' records
•Display your favorite records in style
•Easy mounting and swapping of your vinyl covers
•Sturdy plastic construction with an extra wide frame border
•Adjustable wall mounting bracket
•Additional stand for upright placement
•Available in black, white and rosewood design

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your favorite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy plastic construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favorite records in style.

Technical Data
•External dimensions: 236 x 14 x 236 mm (L x H x W)
•Internal dimensions: 178 x 178 mm
•Weight: 378 g (1 frame)

Features
•3x vinyl cover frames for 7'' records
•Display your favorite records in style
•Easy mounting and swapping of your vinyl covers
•Sturdy plastic construction with an extra wide frame border
•Adjustable wall mounting bracket
•Additional stand for upright placement
•Available in black, white and rosewood design

The Glorious Vinyl Frame Set lets you display your vinyl cover artfully in any setting. The set consists of three vinyl frames and is suitable for all 7'' record covers. A vinyl cover is often more than just a sleeve for your record – many of them are designed with stunning artworks or were individually signed by artists. To avoid your favorite record covers collecting dust in record boxes, we have developed a suitable frame for them. The sturdy plastic construction with glass cover is designed for 7'' covers and is captivating due to its minimal and stylish design, which is available in three colour finishes. The vinyl frame can either be hung on the wall or placed on even surfaces, thanks to the hinged stand. Display your favorite records in style.

Technical Data
•External dimensions: 236 x 14 x 236 mm (L x H x W)
•Internal dimensions: 178 x 178 mm
•Weight: 378 g (1 frame)

Features
•3x vinyl cover frames for 7'' records
•Display your favorite records in style
•Easy mounting and swapping of your vinyl covers
•Sturdy plastic construction with an extra wide frame border
•Adjustable wall mounting bracket
•Additional stand for upright placement
•Available in black, white and rosewood design

Features:
• 3x vinyl cover frames for 12'' records
• Stylish interior design with your favourite records
• Easy to mount and exchange your vinyl art
• Wide frame border available in black, white and rosewood version
• Adjustable grip mount
• Robust plastic frame and glass cover

Technical Data:
• Outer dimensions: 370 x 370 x 15 mm
• Inner dimensions: 310 x 310 mm
• Weight: 875 g (1 frame)

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available as untreated wood edition or black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 355 x 340 x 210 mm
•Weight: 5 kg

Features
•Holds up to 55 12'' records
•Combination system: perfectly stackable with other •Glorious Record Boxes
•Optically matches the Glorious Mixstation and Mix Extension
•Available with black or white shrink-wrap finish

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

Plain and solid storage system for 12'' records. These record boxes are made of quality MDF wood, available with black or white shrink-wrap finish.

Technical Data
•Material: MDF wood
•Dimensions: 705 x 355 x 340 mm
•Weight: 11.7 kg

Features
•Holds up to 230 12'' records
•Combination system: perfectly stackable with other Glorious Record Boxes
•Optically matches the Glorious Mix Station and Mix Extension
•Available with black or white shrink-wrap finish

2-way bookshelf speakers

And these are comments from audio testers:
• Well tuned and upbeat basslines
• Lively dynamics
• Surprisingly low coloration
• Good transparency and reasonable image depth
• Bass is fast and tuneful, this is what really matters!

Scope of delivery:
• 2x Speaker Box 5
• 2x speaker grill black
• 1x pair of gloves

Features:
• Audiophile bass-reflex design
• Gold-plated speaker terminal (single-wired)
• Simple Wall-mount included
• Magnetically shielded
• Front cover with magnetic attachment
• Speaker-Box Wall Bracket available as an option

Technical Specifications:
• Sensitivity (1W/1m): 86 dB
• Recommended amplifier power: 10 to 150 watts
• Tweeter: 25 mm Ø silk-dome Neodymium magnet
• Woofer: 130 mm Ø fiberglass cone
• Frequency response: 55 Hz - 20 kHz
• Impedance: 4 - 8 Ohms
• Dimensions: W x H x D 160 x 255 x 210 mm
• Weight: 4.2 kg

Features
•Gently cleans your vinyl while playing
•Follows the grooves
•Heavy weight base for secure placement
•Uni-pivot design
•Easy setup
•Suitable for Primary, Essential and Debut turntables
•Elegant looks
•Durable materials
•Brush made of natural hair

Technical Specifications
•Weight: 430 g
•Arm-length: 226 mm
•Arm material: Aluminium
•Brush: Hair

The 7 inch 110 record box is the ideal box for storing and presenting a 7 "record collection. It can be placed vertically or horizontally and can be used creatively at any point in the Record Box module system.
Thanks to a side length of 36 cm, the 7-inch 110 storage box is perfectly matched to the basic modules. It can hold up to 110 7 "records. It is available in three colors.

Thanks to the diverse stacking options, individual record furniture such as sideboards, record shelves, DJ racks and more can be created in combination with other storage boxes, register boxes and add-ons.

The 7-inch 110 storage box, like the other boxes in the Record Box system, is made of robust MDF and has a resistant surface made of melamine resin. An innovative glue dot system was developed to connect the boxes. All glue dots are attached to the connection points according to the instructions and can easily be removed without leaving any residue.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 21.5 cm | Inside dimensions of the box: 33 x 20 x 20 cm (LxWxH)
• Volume: a maximum of 100 LPs or books, magazines, pictures, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

Features:
•Elegantes Display und Aufbewahrungsmöglichkeit für Schallplatten
•Bietet Platz für bis zu 75 Schallplatten
•Stilvolle Präsentation im zeitlosen Design aus Holzelementen und stabilem Acrylglas
•Verwendbar für alle Vinyl-Formate (7‘‘, 10‘‘, 12‘‘)
•Bequemes Stöbern seiner Vinyl-Sammlung ohne Verrutschen der Platten dank gerillter Holzführung
•Praktischer Neigungswinkel zu beiden Seiten verhindert ungewolltes Umkippen der Schallplatten

The 12 inch 50 record box from Record Box is the smaller alternative to the 12-inch 110 storage box. It offers space for around 50 records or three folders and can be positioned either vertically or horizontally.

With its exactly half the size of the square 12-inch 110 box, the 12-inch 50 record box gives the system an individuality and variety with which an optimal solution can be found for every collection and every room.

The small record box is also available in three colors and can be freely combined with the other storage boxes, register boxes and add-ons to create record shelves, storage furniture and everything a collector's heart desires.

Like all modules, the 12-inch storage boxes are made of high-quality MDF and coated with a resistant surface made of melamine resin. The boxes are connected using glue dots that are attached to the contact surfaces of the boxes according to the instructions. The glue dots specially developed for this modular system can be removed at any time. New arrangements can be implemented immediately with the help of new adhesive dots.

Two sets of top & baseboards enable the construction of sideboards or flat shelves. Adjustable feet compensate for minor unevenness in the floor, the topboard forms a straight end and a uniform surface for sideboards, DJ racks, highboards, roll containers, small tables and other furniture ideas.
Record-Box stands for uncompromising creativity and offers vinyl collectors the freedom they need for optimal storage and presentation of their records.

Technical details:

• Outside dimensions of the box: approx. 36 x 18 x 36 cm | Inside dimensions of the box: 33 x 15 x 33cm (LxWxH)
• Volume: around 50 LPs or 2-3 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

The 12-inch 110 Record Box is the heart of the modular storage system. In connection with other boxes and add-ons, countless variations of furniture are created for the storage and presentation of record collections, technology, folders, books, clothing and other items.

The 12-inch storage box is square and offers space for around 110 records with a side length of 36 cm. It is available in three colors, can be aligned as required and combined with other storage boxes and add-ons. In this way, individual storage furniture, sideboards and shelves can be created and expanded at any time.

The 12-inch storage box is made of high-quality MDF and has a resistant melamine resin surface. Glue dots were specially developed for the Record Box System, with the help of which all boxes can be effortlessly assembled and disassembled as described in the instructions. A residue-free detachment and new stacking of the boxes are possible at any time.

Two sets of top and baseboards give the storage box a smooth top surface. You can create record shelves, sideboards or DJ racks.

Record Box stands for diversity, flexibility and offers vinyl and important objects the right space.

Technical details:

• Outside dimensions of the box: approx. 36 x 36 x 36 cm | Inside dimensions of the box: 33 x 33 x 33 cm (LxWxH)
• Volume: approx. 110 LPs or 4-6 folders, books, magazines, etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Connection element: glue dots from Record Box
• Boxes for self-assembly - screwdriver required!

Related products and other modules from Record Box:

• Glue dots
• Storage Box 12-Inch 50
• Register Box 12-Inch 100
• Topboard & baseboard set for two boxes
• Topboard & baseboard set for three boxes
• Rollboard for one box
• Storage Box 7-Inch 110
• Register Box 7-Inch 100
• Record Player Lowboard

At Music Box Designs we love two things; vinyl records and wood, and since we don't make our own LP's, we'll talk about wood. These handcrafted record display stands are constructed of solid Oak. They are cut, branded, sanded and oiled to offer you a perfect way to display your vinyl while listening to it. So get yourself and your vinyl into the groove and immerse yourself in sight and sound.

Dimensions: 18cm Long x 3.5 cm tall (at the tallest level)

Sourced and crafted in Europe!

*Please note that our record holders are designed to hold a vast majority of albums, however, box sets or triple record sets will not fit. In addition, very old and thin record jackets may not stand upright.

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 1 on solid walls, such as Brick.

Features:
• Resonance-free wall mount for turntables & Hifi
• Playback of records free from any influence by impact noise and vibrating floors
• WMI wall mounts use rigid steel frame construction
• Height-adjustable spikes to level the board
• Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 90 x 415 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

Give your turntable a home in your home. With the Manchester record stand your vinyl setup is ready to shine. Designed to fit all of the Crosley briefcase design record players and store up to 30 records between the wire slots. The Manchesters beautiful hardwood and veneer finish gives this mid-century modern turntable stand a craftsman's touch. Available in white and paprika.

• Handcrafted Hardwoods & Veneers
• Wire Slots for Record Storage
• Hand Rubbed Finish
• Wood - White Coloured Veneer
• Flatpack package
• Easy to assemble
• Light Assembly Required
• Dimensions: 45,7 cm (l) 33 cm (w) 63,5 cm (h)
• Weight 5,4 kg

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Audiophile Entry Level Turntable

A New Generation of Turntable – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

In the box:

T1 with Ortofon OM 5E cartridge
Directly soldered Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Belt-driven
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (manual speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Included accessories dustcover, feltmat
Built-in Power Supply 230V 50Hz (US: 110V 60Hz)
Power consumption 3 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-Manual.pdf

A New Generation of Turntable

Audiophile Design Pushed to a New Affordable Level

Premium Materials – Stylish Aesthetics – Rich & Lively Sound.

Audiophile Engineering. No Plastic.
The stylish CNC-machined wooden plinth features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design – again avoiding the flaws of plastic or lightweight steel alternatives.

No corners cut. More sound.
The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Audiophile To The Point

Ortofon OM5E - Elliptical stylus for detailed response
Supplied with an Ortofon OM 5E Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect it E - Semi-balanced phono cable
The T1 comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU - A new affordable marvel
Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

Features
•Belt-driven
•Built-in phono stage and Bluetooth for wireless use
•Anti-resonant sub-platter design
•Heavy 8mm, zero-resonance blasted-glass platter
•Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
•Ortofon OM5e moving magnet pickup
•8,6“ highly precise and light aluminium tonearm
•Low friction, vibration free tonearm bearing
•One-piece tonearm design with integrated headshell
•Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
•Vibration absorbing feet
•Elegant dustcover with adjustable hinges
•Available in High-Gloss Black, Satin White and Walnut
•Hand-made in Europe

Technical Specifications
•Speed: 33,45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.7% 45: 0.6%
•Wow & Flutter: 33: 0.25% 45: 0.23%
•Platter Heavy: 8mm, blasted-glass platter with felt mat
•Main bearing: Stainless steel/brass
•Signal to noise: 65dB
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 5 - 10g (pre-mounted)
•Tracking force range: 0 - 50mN (17.5 mN pre-adjusted)
•Outputs: RCA Line, RCA Phono, Bluetooth
•Included accessories: dustcover, feltmat, power supply, high-quality phono/line RCA cable
•Built-in Power Supply: 110 - 240V/50, 60Hz; 15 V DC 800mA
•Power consumption: 3 Watt max
•Dimensions: 415x100x335 mm (WxHxD)
•Weight: 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/T1_T1_Phono_SB_T1_BT_Manual.pdf

Features
•Built-in phono stage
•Switchable phono and line output
•Belt-drive with synchronous motor
•Ortofon quality cartridge
•Vibration absorbing feet
•NO plastic
•Machined special composit fibre chassis
•Light-weight, high-precision aluminium tonearm
•Sapphire tonearm bearing
•Gold-plated contacts
•Stainless steel bronze bushing
•Elegant dust cover with adjustable hinges
•Silicon belt with optimum damping
•Hand-made in Europe

Technical Specifications
•Outputs: RCA Phono/Line
•Speed: 33, 45 (manual speed change)
•Principle: Belt drive
•Speed variance: 33: 0.8% 45: 0.7%
•Wow & Flutter: 33: 0.29% 45: 0.27%
•Platter: 300 mm with felt mat
•Main bearing: Stainless steel
•Tonearm: 8.6” aluminium
•Effective arm length: 218.5 mm
•Overhang: 22.0 mm
•Effective tonearm mass: 8.0 g
•Counterweight for mass: 3 - 7 g (supplied)
•Tracking force range: 0 - 25mN (18mN pre-adjusted)
•Included accessories: Dust cover
•Power consumption: 4.5 Watts max
•Dimensions: 420 x 112 x 330mm (WxHxD)
•Weight: 4.0 kg net

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

AT-VM95EN vormontiert auf Headshell AT-HS6BK
• Das Tonabnehmer-Set AT-VM95EN/H wird im Audio-Technica Werk in Fukui (Japan) vormontiert, getestet und verpackt.
Gesamtgewicht 15,5 g

Der AT-VM95EN besitzt eine nackte,
elliptische Diamantnadel mit Rundschaft,
die aus einem Stück geschliffen und
direkt in den Nadelträger eingesetzt
wird. Auf diese Weise lässt sich ein
leichteres, steiferes Übertragungssystem
realisieren als mit einer gefassten
Diamantnadel mit Titan-Rundschaft wie
beim AT-VM95E. Die nackte
Diamantnadel ist zwar um einiges
kostspieliger, bietet aber auch eine
hörbar bessere Audioqualität mit
besonders hoher Klangtreue bei der
Höhenwiedergabe und hervorragendem
Impulsverhalten.

Aluminium-Nadelträger
• Ausgangsspannung 3,5 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Frequenzgang 20 bis 23.000 Hz

AT-VM95EN
VM95 SERIES ELLIPTICAL NUDE STEREO CARTRIDGE
The AT-VM95EN, features a Nude Elliptical Diamond. The construction of the stylus being a one piece diamond with a round shank inserted in the cantilever creates a lighter and more rigid transmission system than a diamond tip bonded on a round titanium shank such as in the AT-VM95E. Also the use of nude diamond implies a substantial difference in pricing, yet the quality of the reproduction will be immediately noticed, specifically in the fidelity of high frequencies and in the quality of the transient responses.

Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 23,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Model AT-VM95EN
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 23,000 Hz
Kanaltrennung 22 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Nude Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95EN
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

AT-XP7
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• VM dual magnet cartridge with elliptical bonded stylus

The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable robust design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• Great visibility of stylus tip for instant positioning in dark environments
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Tapered aluminium cantilever
• Stainless wire suspension enables expressive higher frequency for clearer sound
• High-rigidity and Low-resonance cartridge housing
• Replacement Stylus: ATN-XP7

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 20,000 Hz
• Channel Separation: 22 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Stylus Construction: Bonded Round Shank
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 6.0 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: Output Channel Balance
• Stylus Shape: Elliptical
• Cantilever: Aluminium tapered Pipe
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 8.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP7
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

User Manual: https://eu.audio-technica.com/resources/AT-XP7_UM_112301360_V1_11L_web_171018.pdf

The Jackie Brown T-Shirt's features include:
• rib crew neck with interior tape
• Jackie Brown artwork printed on front
• regular fit
• 100% cotton single jersey

The Mort Garson Plantasia Cover Art Longsleeve is equipped with the following features:
• rib crew neck with interior tape
• Plantasia Cover artwork printed on front
• additional graphics printed on sleeves
• stretch cuffs
• regular fit
• 100% cotton single jersey

The Motown M Logo Tee is equipped with the following features:
• rib crew neck with interior tape
• M Logo artwork printed on front
• regular fit
• 100% cotton single jersey

They say you can't judge a book by its cover, and going by 'Jazz Rock', nor a record by its title. Though entering into jazz territory and featuring some distorted guitar, 'Jazz Rock' is more a beautiful marriage of funky breakbeat drumming and spiritual jazz instrumentation, combined with traditional Min'y music performed on the koto and shakuhachi.
Originally released in 1973, the record sounds simultaneously vintage and contemporary. It is akin to something Madlib might dream up whilst lost in Japan collaborating with Min'y players at a recording session. The record features some amazing shakuhachi (bamboo flute) playing by Hozan Yamamoto, which gives the music a haunting, dreamlike atmosphere. You can almost visualise the long grass blowing in the wind, and ear the bamboo rustling in the distance on a long hot summer's day. Takeshi Inomata, Tadao Sawai and Kazue Sawai anchor the session. Takeshi's exceptionally funky-drum work will almost certainly get some producers dusting off and firing up their MPC's. Whilst Kazue and Tadao work their magic on the koto (a traditional string instrument). Though certainly not an ambient record, 'Jazz-Rock' has the same meditative, other-worldly quality that invites you to sit back, listen and be transported somewhere else. Unfortunately, until now the 'Jazz Rock' album is a scarcity that commanded a high price-tag only for the most hardened of record collectors. So it is pleasure to make it accessible to all, and we hope you dig this lost, obscure future classic as much as we do.

So so classic album by The Fugees' first lady!

This book is a journey – a ride through the depths of Germany’s modern musical roots:

At the beginning of the 1970s, experimental and progressive music in Germany developed far from the mainstream. Although few initially noticed it, it is now internationally celebrated as a cult phenomenon called „Krautrock“. Today, bands like Kraftwerk, Can, Amon Düül II, NEU!, Cluster, and Tangerine Dream are considered pioneers of groundbreaking sound experiments.

In order to understand the Krautrock era and its impact, it’s worth delving deeper into the history of German rock music and taking a closer look at the overall picture.Times & Sounds offers a comprehensive insight into the mechanisms of post-war Germany’s music industry and sheds light upon its diverse musical styles, as well as their mutual influences and connections, which have received little attention until now: From the onset of German Jazz and Swing orchestras to the first Rock ‚n‘ Roll bands around Hamburg‘s Star Club and electronic synthesizer pioneers. From the intact world of Schlager to agitprop and left-wing protest songs. From the avant-garde compositions of Stockhausen and his presumed disciples of Krautrock to the Neue Deutsche Welle.

This book is a journalistic diary tracing Germany’s dynamic culture from the late 40s to the early 90s. Those who take this journey experience the ups and downs of five decades, thus developing an understanding deeper than any other of the Krautrock phenomenon.

– Foreword by Hans-Joachim Roedelius (Kluster/Cluster/Harmonia)
– Hardcover with coloured headband and ribbon
– 536 pages including coloured endpaper with infographics

Remastered by Manuel Göttsching and released on his own label MG ART. Inventions for Electric Guitar is Manuel Göttsching´s first solo album, recorded: July-August 1974.
The album was written and performed entirely by Göttsching on electric guitar, hence the title. Manuel played his guitar and used a 4 track TEAC A3340, Revox A77 for echoes, WahWah pedal, volume pedal, Schaller Rotosound and Hawaiian steel bar.

LP 180g, beautiful embossed Chess Board Artwork Print, inner sleeve with artist picture and text by David Elliott, Sounds June 16, 1984!

Limited to 500 copies. Latin Funk Psych Fuzz Blaster basically covers all the realms of rare record collecting in one shot!!
There's the Funk Fuzz Blaster "Maranatha" or the Ray Barretto Latin Jazz Groove cut "El Que Se Fue" with freaky synth blasts.
The Texas Easy Funk moves of "Squeeze" which remind of Steam Heat, or the lounged out soul rendition of Stevie Wonder's classic "Bird Of Beauty”. Something for everyone and impossibly rare!!

Originally released on Studio !K7 Records in 1998, Peter Kruder and
Richard Dorfmeister's groundbreaking release, 'The K&D Sessions'
reset the bar for what could be achieved in a compilation. Across an
array of original tracks, dubs and infamous K&D Session remixes, the
DJ and producer duo took the listener on a smoke-filled blunted journey
that flowed flawlessly. Often compared to DJ Shadow's 'Endtroducing'
for it's similarly deft craft of rhythm and quoted by Allmusic as "the
most blissfully blunted music the world has ever heard", the album has
sold over 1,000,000 copies to date and was included in Spin s Top 20
albums of 1999 .
The album has long since been deleted on Vinyl
with original 4LP sets changing hands for 300+ on the collectors market
and even a bootleg vinyl copy will set a buyer back over 100. Sixteen
years later, this legendary album will be available as a long overdue
5LP reissue remastered by Bernie Grundman Mastering in Hollywood.
Finally back in print in 180g vinyl.

Bestselling author and Sundance award-winning director Questlove offers a thrilling, music-driven ride through the last fifty years of American history​.

In Music Is History, bestselling author and Sundance award-winning director Questlove harnesses his encyclopedic knowledge of popular music and his deep curiosity about history to examine America over the past fifty years. Choosing one essential track from each year, Questlove unpacks each song’s significance, revealing the pivotal role that American music plays around issues of race, gender, politics, and identity.

Music Is History focuses on the years 1971 to the present, not only the country’s most complex and rewarding half-century when it comes to the ways that pop culture and culturally diverse history intersect and interact, but also the years that overlap with Questlove’s own life. Music Is History moves fluidly from the personal to the political, examining events closely and critically, to unpeel and uncover previously unseen dimensions, and encouraging readers to do the same. Whether he is exploring how Black identity reshaped itself during the blaxploitation era, analyzing the assembly-line nature of disco and its hostility to Black genius, or remembering his own youth as a pop fan and what it taught him about America, Questlove finds the hidden connections in the American tapestry.

Complete with playlists organized around personal, playful themes that touch on everything from the relationship of hip-hop to music’s past to the secret ingredient in all funk songs, Music Is History is filled with and informed by Questlove’s preferences, perspectives, and particularities. It feels like both a popular history of contemporary America and a conversation with one of music's most influential and unique voices.

Graham Sharpe's life has been played out to a background of personally significant vinyl-related events, and his own large and ever-growing collection of LPs not only reflects his musical addiction, but also represents an intensely direct link to many of his key experiences. In this unique book he considers all the elements of record collecting which he loves - and one or two he doesn't - as he continues his long-term project to visit every surviving second hand record shop in his own and other countries, and reports on the many characters he has encountered, and the adventures he has accrued along the way.

The Record Box Record Player Lowboard is much more than a hi-fi sideboard, it's a nice retro design made for vinyl lovers who put emphasis on interior furnishing without lacking functionality. After a fast and easy assembly, the Record Box Lowboard offers storage for up to 70 records while a separate compartment holds the one being currently played or those about to be played.

Record Box Record Player Lowboard - Features:

• usable on both sides (turntable can be placed on the left and the records on the right or vice versa)
• space for turntable and amplifier
• holds up to 70 records
• separate space for records in use
• support material: solid wood (natural or dark purple finish)
• cabinet material: white laminated composite board
• external dimensions: 90 x 38 x 42 cm (L x H x W)
• turntable area: 48 x 42 cm
• amp compartment: 45 x 19 x 42 cm (L x H x B)
• pre-selection rackl: 5 cm
• shelf for storage of 12" vinyl records: 38.5 x 40.5 cm
• product weight: 12.9 kg
• packaging dimensions: 102 x 52.5 x 8.5 cm
• total shipping weight: 14 kg
• Boxes for self-assembly - screwdriver required!

Sault returns with a new album featuring Michael Ofo and Little Simz. NINE will be limited to a short press run of 16,000 units, never to be re-issued again!

Once again the RECORD RUNNER, originally known as the SOUNDWAGON is now available world wide! As the world's smallest portable vinyl record player, the RECORD RUNNER is for anyone who is a DJ, record collector or a simple music lover. It is a self-contained record player, small enough to fit in the palm of your hand. Just place it on any 33 1/3 rpm vinyl record and listen to its sound. Totally reengineered from the past 35-year-old model, the RECORD RUNNER is ALL NEW! We have made drastic measures to improve the quality. They are hand built, assembled, and MADE IN JAPAN. Whether shopping for vinyl records, checking out the stash at your local garage sale or listening to your old man's disco records (or your own), the RECORD RUNNER is a must. Amaze everyone with the RECORD RUNNER. VW Bully!

NOTE: The sound is not the greatest. Please note that the Record Runner is a toy and no audiophile equipment! Also we don't recommend to use it with your rarest records. But hey, it's fun watching it.

Video: https://youtu.be/_efv3ZGPc7A

Important New Facts for version 2.0:
• Newer firmware
• better tracking
• ultra pitch adjust
• newer tires (silicone)
• sound improvements due to tracking and more
• stylus and cartridge system, powered by Audio Technica (Replaceable needle)(hhv-ID: 558983)

Common Facts:
• Officially Licensed by Volkswagen
• NEW Enhanced SOUND QUALITY (best in its class)
• NEW Battery powered with 2 x AAA batteries (no longer uses 9V) [batteries not included]
• NEW Volume control
• NEW LED Track/Power light
• NEW On and Off switch with two speeds for temperature and environment settings
• NEW Automatic stop function at the end of the record
• NEW Stylus and Cartridge System, powered by Audio-Technica (Replaceable needle) (hhv-ID: 558983)
• ENTIRELY and NEWLY engineered (Electrical/Mechanical)
• NEW and IMPROVED SPEAKER, for better SOUND QUALITY with sound expansion through the body
• Made in Japan
• Number one sought after record player in the world
• Always has been the mistery player for diggers and collectors
• Smallest, most convenient record player in the world
• Covered worldwide in magazines, tv, movies, etc.
• Once known as the "Vinyl Killer" and "Soundwagon", now the Record Runner
• From Stokyo, the originators and the people who brought you the "Soundwagon" and "Vinyl Killer"
• Parts and various components upgraded since it's last version ("Soundwagon")
• Introduced back in the 80s, the RECORD RUNNER is the only vintage record player still in existence today (with some improvements of course)

“The art of the remix has been around for several decades, from the fervid imaginations of JA pioneers like Coxsone Dodd, Duke Reid or King Tubby to the disco enthusiasts of New York, such as Tom Moulton, who bequeathed us the modern iteration of the remix and provided a template from which most remixers still work. Moulton's first commercial remix, a reworking of BT Express' appropriately-named `Do It 'Till You're Satisfied', which stretched it from three minutes to a luxurious five, assisted the band in securing its first Billboard R&B Number One, as well as providing a pathway for remixers like Walter Gibbons, Larry Levan, Richie Rivera and Tee Sott, to completely reinvent the concept of a remix (and in some instances, deconstructing the idea of what comprised a song). It has subsequently been used as a marketing tool, a dancefloor-devastator, a gimmick (both cheap and expensive) or even as a way of reaching a different audience (think Tori Amos' `Professional Widow'). Khruangbin are no slouches when it comes to the remix themselves. They've been reworked before, in 2016, with the highly collectible EP on Boogiefuturo. But this time, they're taking it a step further with an album dedicated to the art. Entering the tight-knit world of a Khruangbin song can be a little daunting. They have created this entire universe in which the trio seem to function telepathically in the way the music is composed, arranged and played. To mess with their delicate eco-system can invoke feelings similar to that of an unwanted guest crashing a good-time party. "We write our music to be interpreted; this is another wonderful interpretation of the music," reassure Khruangbin. "There is something very vulnerable about letting others work on your music. But through the correspondence with the different artists, we gained a bigger connection to the songs themselves." The choice of remixers for this album is neither arbitrary nor accidental. They're not names picked randomly out of a hat or chosen via a throw of the dice. All have some connection to the band, sometimes personal friendships, musical connections, or simply mutual musical appreciation. Harvey Sutherland and Ginger Roots have both toured with the band, Kadhja Bonet and Ron Trent had their own mutual fan club going on, Knxwledge sampled `White Gloves' on a recent mixtape, Natasha Diggs and Soul Clap's Eli's are recent buddy-ups, Quantic is a mutual friend of Bonobo (crucial in the KB origin story), while I've known Laura for number of years; plus she is also godmother to one of Felix Dickinson's kids. Doesn't get much more intimate than that, right? Some of these remixes were specifically made so you can dance your ass off while getting down to the Khruangbin sound, while some might better be appreciated horizontally with headphones on, wearing fashionably loose clothes. The choice is yours. But all were made with love and respect for Khruangbin. "A good remix deconstructs, recontextualizes, or simply extends a good time," say the band. Amen and out." - Bill Brewster