DJ Equipment Green 64 Items

AT-VMN95E
VM95 SERIES ELLIPTICAL REPLACEMENT STYLUS
Aluminium cantilever
Elliptical stylus
Bonded Round Shank

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Der AT-VM95E ist das neue
Einstiegsmodell von Audio-Technica mit
elliptischer Nadel, das nicht nur den
legendären AT95E ersetzt, sondern auch
von den Entwicklungen des im Jahr 2015
eingeführten AT95EX profitiert.
Der AT-VM95E überzeugt durch ein
optimiertes, markantes Design mit steiferem,
resonanzarmem Gehäuse und – dank zwei
Gewindeeinsätzen im Gehäuse – eine
besonders einfache Montage mit nur zwei
Schrauben, ohne Muttern (mit Headshell oder
in den Tonarm integriert)

• Aluminium-Nadelträger
• Ausgangsspannung 4,0 mV
• Gehäuse kompatibel mit allen Abtastnadeln der Serie VM95
• Ersatz für AT95E und AT95EX
• Frequenzgang 20 bis 22.000 Hz

AT-VM95E
VM95 SERIES ELLIPTICAL STEREO CARTRIDGE
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

NO USE OF NUTS
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Model AT-VM95E
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 22,000 Hz
Kanaltrennung 20 dB (1 kHz)
Kanalbalance am Ausgang 2.0 dB (1 kHz)
Ausgangsleistung 4.0 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Elliptical
Nadelabmessungen 0.3 x 0.7 mil
Schaftform der Nadel Bonded Round Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 17 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 7 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95E
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers

Replacement stylus for AT95E cartridge

The ATN95E is also compatible with discontinued models AT93 and AT95.

SL-1200M7B Direct Drive Turntable System

Technics for Automobili Lamborghini SL-1200M7B

Technical Data:
• Technics for Automobili Lamborghini collaboration model
• Coreless Direct-Drive Motor Achieving Stable Rotation
• Diverse New Functions Adapt to Various Playing Styles
• High Sensitive Tonearm
• Stylus Illuminator Featuring a High-brightness and Long-life White LED
• High-rigidity Cabinet and High-damping Insulator

Design Inspired by Automobili Lamborghini DNA
The functions of the SL-1200M7B are based on the SL-1200MK7/SL-1210MK7 models, while the design is inspired by Automobili Lamborghini’s iconic Y-shape pattern. Orange, Green and Yellow are the colours of the SL-1200M7B, based on the most iconic liveries of the Italian automotive super sports cars brand. Automobili Lamborghini and Technics operate in completely different markets but share the same values with cutting-edge ideas and approaches: disruptive technological development, a corporate culture rooted in a spirit of uncompromising craftsmanship, and the pursuit of emotional sounds inspiring customers—with Automobili Lamborghini, the sound of its engines, and with Technics, the sound of its audio. The SL-1200M7B is the powerful result of the collaboration and innovative ideas of the two brands.
*Consumption and emission values of Revuelto: Fuel consumption combined: 11,86 l/100km; Power consumption combined: 10,1 kWh/100 Km; CO₂-emissions combined: 276 g/km; Efficiency class combined: G; Fuel consumption with discharged battery combined: 17,8 l/100km; CO₂ efficiency class with discharged battery: G; WLTP values

Exclusive Gifts
The SL-1200M7B comes with an original vinyl record containing the powerful V12-engine and driving sounds of six different Automobili Lamborghini super sports cars, a slipmat and two stickers with Automobili Lamborghini and Technics logos. The picture disc features a design inspired by the tires of one of the Automobili Lamborghini's latest models, the Revuelto. As you listen to the sounds of Automobili Lamborghini V12-engines, you can also enjoy the visual effect of the tire spinning on your turntable.

Coreless Direct Drive Motor Achieving Stable Rotation
The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record.

Diverse New Functions Adapt to Various Playing Styles

Torque / Brake Speed Adjustment
The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps.

The Pitch Control Function
The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment.

Reverse Play Function
The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported.
*The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit.

High Sensitive Tonearm
The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching.

Stylus Illuminator Featuring a High-brightness and Long-life White LED
The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment.

High-rigidity Cabinet and High-damping Insulator
The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Specs:
Turntable section:
• Type: Direct Drive Manual Turntable
• Turntable Speeds: 33-1/3, 45 rpm (with switch 78 rpm)
• Starting Torque: 0.18 N・m / 1.8 kg･cm
• Build-up Characteristics: 0.7 s. from standstill to 33 1/3 rpm
• Wow And Flutter: 0.025 %　W.R.M.S.
• Turntable Platter:
- Aluminium diecast
- Diameter : 332 mm
- Weight : Approx. 1.8 kg (Including slipmat and slipsheet)

Tonearm Section:
• Type: Universal Static Balance
• Effective Length: 230 mm
• Overhang: 15 mm
• Tracking Error Angle:
- Within 2° 32' (at the outer groove of 30cm (12") record)
- Within 0° 32' (at the inner groove of 30cm (12") record)
• Offset Angle: 22°
• Arm-height Adjustment Range: 0 - 6 mm
• Stylus Pressure Adjustment Range: 0 - 4 g (Direct Reading)
• Head Shell Weight: Approx. 7.6 g
• Applicable Cartridge Weight Range:
- 5.6 - 12.0 g (without auxiliary weight)
- 14.3 - 20.7 g (including head shell)
• Head Shell Terminal Lug: 1.2 mmφ 4-pin terminal lug

Terminals:
• Audio Output:
- PHONO (Pin Jack) x 1
- EARTH TERMINAL x 1

General:
• Power Supply: AC 110 - 240 V, 50 / 60 Hz
• Power Consumption:
- 8 W
- Approx. 0.2 W (Standby)
• Dimensions (W x H x D): 453 x 169 x 353 mm
• Weight: Approx. 9.6 kg

Accessories:
Turntable, Slipmat, Slipsheet, Dust cover, EP record adaptor, Balance weight, Head shell, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Original vinyl record, Brand logo stickers, Owner's Manual

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Roll this fresh scented glob of goo along the direction of the vinyl record grooves to safely remove dust and other debris without scratching.

vinyl cleaning gel:
• Dimensions: 6,35 cm (l), 6,35 cm (w), 7 cm (h)
• Weight: 160 gram gel

rhythm – drum synthesizer and sequencer with parameter locks, individual step re-trig and punch-in effects.

real synthesised drum sounds
sampled drum sounds
16 punch-in effects including delay, bit crusher and filters.
parameter locks
auto compressor
hardware limiter
step multiplier
fill-ins
16-step sequencer
16 patterns
16 pattern chaining
clock
alarm clock
jam sync with audio through
3.5 mm audio out / in
animated unique lcd display
folding stand
2 year standby time

Manual: https://www.teenageengineering.com/guides/po-16/en

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: green

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

With the new Mercury record players we add earth tones to our collection. The round shape provides a friendly invitation to enjoy records. Crosley has given the record player a luxurious look by combining a textured fabric with silver & gold hardware. This compact briefcase design record player comes with a NP-15 diamond needle and its 2-way Bluetooth allows you to tune the sound to your needs.

Available in three colors:
• Cream Croc
• Black Croc
• Forest Green

Specifications:
• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers - 3”, 4Ω, 5W x 2
• Crosley NP-15 needle
• Belt-driven
• Pitch control
• Built-in Bluetooth Receiver
• Bluetooth out
• Bluetooth version 5.1
• Aux in
• Headphone Jack
• RCA output
• EU & UK AC Power adapter
• Autostop
• Weight: 4,536 kg
• Dimensions (LxWxH): 38,735 cm x 34,29 cm x 17,145 cm
• Comes with 45 RPM adapter, 3.5mm to RCA cable, Power adaptor

The Reloop Fader Caps bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple fader caps are a great addition to your set-up. Supplied in packs of 5, they're also perfectly complemented by Reloop's new Knob Caps. Customise your gear and stand out from the crowd.

FEATURES
• 5 fader caps
• Rubber coating for tight grip
• Ergonomic fader cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with the most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 14 g (packaging unit)
• Dimensions: 15 x 8 x 3 mm

The Reloop Knobs bring fresh and bright neon-style colours to your DJ mixer or controller. Simple to install and boasting a rubberised, ergonomic design that can help elevate your performances further, these simple caps are a great addition to your set-up. Supplied in packs of 8, they're also perfectly complemented by Reloop's new Fader Caps. Customise your gear and stand out from the crowd.

FEATURES
• 8 knob caps
• Suitable for all potentiometers with d-shaft
• Rubber coating for tight grip
• Ergonomic knob cap size
• Easily exchangeable caps
• Individual design for your equipment
• 5 fresh, glaring neon-style colours
• Compatible with most DJ mixers and controllers

TECHNICAL DATA
• Available in yellow, green, blue, purple and white
• Weight: 20 g (packaging unit)
• Dimensions: 7 x 12 x 7 mm

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

High-Fidelity Closed-Back Headphones
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A990Z high-fidelity headphones deliver a premium high-fidelity sound performance.

High-Fidelity Art Monitor Series
Representing the next-generation of Audio-Technica’s Art Monitor series, the ATH-A990Z high-fidelity headphones deliver a premium high-fidelity sound performance. Featuring newly designed 53mm drivers, hand-assembled in Japan, that deliver clear, natural high-resolution audio reproduction, and lightweight aluminium housings with a deep metallic forest green finish.

Japanese Precision
Each newly designed 53mm driver is hand-assembled with Japanese precision for increased reliability and performance.

Comfortable Fit
Premium, soft earpads provide a comfortable fit for long listening periods.

Extended Bass Frequency Range
Double Air Damping Structure (D.A.D.S.) optimises the internal airflow to provide an extended bass frequency range for deep bass reproduction.

Enhanced 3d Wing Support
Redesigned, self-adjusting 3D Wing Support Housing that perfectly adapts to the user’s head for a closer, more stable fit providing extra comfort for long listening periods.

Premium Earpads
Offering a comfortable fit for long listening periods, the A990Z headphones include premium, soft earpads.

Superior Design
Lightweight aluminium housings with a deep metallic forest green finish.

Tangle-Free Cable
Includes a 3.0m cloth-wrapped tangle-free cable.

Features:
• Hand-assembled in Japan, the A990Z features newly designed 53mm drivers for a premium high-fidelity sound
• Lightweight, aluminium housings with a deep metallic forest green finish
• Innovative 3D wing support for a great fit and long-wearing comfort
• Premium, soft earpads for comfortable fit
• Double Air Damping System structure provides an extended frequency range for deep bass reproduction
• 3.0 m cloth-wrapped tangle-free cable

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 53mm
• Frequency Response: 5 – 42,000Hz
• Maximum Input Power: 2,000mW
• Sensitivity: 100dB/mW
• Impedance: 44 ohms
• Weight: 335g (without cable)
• Cable: 3.0 m
• Connector: 6.3/3.5 mm gold-plated stereo 2-way plug

Now with 2-way Bluetooth!

A record player accessible to everyone. The Cruiser design is where it all started for Crosley and is still going strong.
This small suitcase has a playful appearance and because it’s so easy to use, everyone can (re)discover the magic
of vinyl. The Cruiser record player is now upgraded with 2-way Bluetooth, which makes it possible to connect an
external Bluetooth speaker for an amplified sound.

• 3-speed record player
• Plays 7”, 10” or 12” records
• 2 Built-in speakers | 3”, 4Ω, 3W
• NP6 needle
• Belt-driven
• Pitch control
• Bluetooth input & output
• Aux in
• Headphone Jack
• RCA output
• AC power adapter (EU & UK PLUG)
• 35.5 cm (l) 25.5 cm (w) 10 cm (h)
• Weight: 2.5 kg
• Autostop

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

Connect your USB compatible gear with Audio Optimized UDG Ultimate Audio cables.

This USB 2.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Audio Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Audio Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official. For devices with an older USB version, this cable is backward compatible so you can still make the connection.

Material PVC + Metal
Protection Constructed with corrosion-resistant, gold-plated connectors for optimal signal
Two ferrite chokes: help eliminate noise in both directions
High-quality multi-shielded PVC USB cable
Extra's Includes UDG Velcro strap for easy storage
High-speed Audio Optimized USB 2.0 A-Male to B-Male cable
Ergonomic UDG Design
Various colors makes them easy to identify
Fits Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

The Vinyl Case 7" Record Storage Carry Case is a best-value box to store up to 50 seven inch vinyl records at home or carry 'em to your next DJ set. It's a favorable basic item with an understated look, plus the Vinyl Case 7" Record Storage Carry Case is easy to assemble - you don't even need much craftsmanship to construct the Vinyl Case 7" Record Storage Carry Case. Made from wood, this 45 rpm vinyl record box is an essential piece for vinyl storage. Dimensions: approx. 210 x 195 x 220 mm

Analog and digital worlds collide in the Reloop Concorde Green cartridge, resulting in the perfect unit designed for use with timecode records. Thanks to its high output voltage, it is able to reproduce timecode signals in an especially precise way while the special spherical stylus also reduces vinyl wear.

FEATURES
•Optimized for timecode vinyls
•Special spherical stylus
•Very high output voltage
•Appropriate for scratching
•Very low vinyl wearout
•Easy tonearm installation through direct SME mounting
•Made by Ortofon

TECHNICAL DATA
•Frequency range: 20 Hz - 20 kHz
•Output voltage (5 cm/s): 8 mV
•Tracking force range: 2 - 4 g
•Recommended tracking force: 3 g
•Weight: 18.5 g

The new RIOT CONTROL-PACK LITE was developed especially for DJs and musicians who frequently travel with a DJ-controller or other production equipment looking to maintain a lite and compact profile. The padded main compartment features an integrated laptop-sleeve and a height-adjustable rolltop closure for ultimate storage flexibility. There is space to support models such as Pioneer DDJ-800, DDJ-SR2, NI Kontrol S4MK3 or Roland DJ-707M, etc., along with a laptop and accessories. Smaller gear such as headphones, cables and power supplies can be easily stored in the large front pocket.

FITS

Laptop up to 17"
Ableton Push2
Akai MPK-25
Akai MPC Renaissance
Arturia MiniBrute2
Arturia DrumBrute
Arturia MicroBrute
Denon MC-4000
Mixars Primo
NI Kontrol S4MK3
NI Kontrol S2MK3
Numark Mixtrack Platinum
Numark Mixtrack Pro 3
Numark NS6II
Numark NV2
Pioneer DDJ-SX3
Pioneer DDJ-800
Pioneer DDJ-SR2
Pioneer DDJ-RR
Pioneer DDJ-SB3
Pioneer DDJ-400
Roland DJ-707M
Roland DJ-202
Reloop Terminal Mix 4

BASICS

Heavy duty and 100% waterproof Tarpaulin
PVC-coated zippers
210D Lining lining
Flexible height adjustment through Rolltop closure
Integrated laptop compartment
Hidden pocket for documents and personal belongings
Padded back panel with airflow system
Ergonomic backpack straps and adjustable sternum strap
Rubberized Bottom
Trolley-sling

SPECS

+ Outer dimensions: (H/B/T): 53-70 x 35 x 20 cm

+ Inner dimensions: : 52- 64 x 34 x 15 cm

+ Weight: 1,38 kg



+ Color: black/bionic-green (Item-No.: 47889 / EAN-Code: 4041212478894)

The new RIOT DJ BACKPACK LITE is the smallest member of our RIOT Pack family and is the perfect DJ and daypack for those who like to travel lite, unobtrusive and with a basic gear setup. The interior layout allows for quick access to numerous storage pouches, with clear organization for your laptop, 12’’ records, headphones, soundcards, cables, accessories and other daily needs. The ultra-compact design meets the personal item requirements of most airlines and can be easily stowed underneath the seat or in the overhead bin.

FITS

Laptop up to 17"
NI Maschine MK3
NI Maschine Micro MK3
Numark DJ2Go
Pioneer DDJ-200
Reloop Spin
Vestax Handytrax
Laptop-Stand
12“ Vinyl
Accessories

BASICS

Heavy duty and 100% waterproof Tarpaulin
PVC-coated zippers
210D Lining lining
PVC-coated zippers
210D lining
Versatile interior layout
180 degree access
Separate laptop compartment
Hidden pocket for documents and personal belongings
Padded back panel with airflow system
Ergonomic backpack straps and adjustable sternum strap
Trolley-sling

SPECS

+ Outer dimensions: (H/B/T): 46 x 33 x 15 cm

+ Inner dimensions: 44 x 32 x 14 cm

+ Weight: 1,1 kg



+ Color: black/bionic-green (Item-No.: 47888 / EAN-Code: 4041212478887)

Stylus for Goldring E2 MM Cartridge

Goldring E2

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Green
• Cantilever: Aluminium
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.2 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.2 C-Male to C-Male cable
• Maximum data transfer rates up to 20 Gbps
• 4k @ 60Hz video support
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

Connect your USB compatible gear with Audio Optimized UDG Ultimate Cables.

This USB 3.0 cable with a streamlined design helps DJ’s and Producers maximize their performance and is ideal for home and professional use where impeccable audio is a must.

UDG Ultimate Cables are designed to interconnect devices with USB interfaces. It is ideal for connecting an audio interface, USB microphone, instrument or most computer peripherals to a PC.

The UDG Ultimate Cables deliver professional performance made with superior flexible PVC cable construction, UDG branding on cable ends and Velcro cable strap validates they're official.

For devices with an older USB version, this cable is backward compatible so you can still make the connection.

FEATURES

Protection:
• Constructed with corrosion-resistant, gold-plated connectors for optimal signal
• Two ferrite chokes: help eliminate noise in both directions
• Includes UDG Velcro strap for easy storage
• High-quality multi-shielded PVC USB cable

Extra's:
• High-speed Audio Optimized USB 3.0 C-Male to A-Male cable
• Maximum data transfer rates up to 5 Gbps
• Ergonomic UDG Design
• Various colors makes them easy to identify

Fits:
• Connects mic, keyboards, and speed-critical devices, such as audio interfaces and external hard drives to your computer

Specifications:
• Length: 1.5 m | 4.92 ft
• Weight: 0,10 kg / 0.22 lbs
• Material: PVC + Metal

The excellent Dr. Suzuki Slipmats are now available in green!
Optimized for mixing, thanks to hand-made Japanese fabric as well as coated edge and center hole. The ultimate standard in slipmats!