DJ Equipment 412 Items

AT6003R Cartridge Case - 3 sets of cartridges with headshells can be stored,
Compatible with double pin lock headshells and Rubber feet for enhanced stability.

Display and protect your cartridges within the distinctive design of this cartridge case, which allows for the secure storage of up to three cartrdiges together with their respective headshells.

No Cartridges included!

AT-LP60XBT
Fully Automatic Wireless Belt-Drive Turntable

• Wired or wireless, enjoy the best of both worlds with the LP60XBT
• Connects to the latest Bluetooth® speakers and headphones
• New Qualcomm® aptX™ codec improves your listening experience
• Fully automatic operation with two speeds: 33-1/3 and 45 RPM
• Integral Dual Moving Magnet™ phono cartridge with replaceable stylus

Turntable
• Drive Method Belt-drive
• Type fully automatic
• Motor DC servo-controlled
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Aluminium
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio >50 dB (DIN-B)
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
• Power Supply Requirements 115/230V AC, 60/50 Hz
• Power Consumption 3W
• Dimensions 359.5 mm x 97.5 mm x 373.3 mm
• Weight 2.6 kg
• Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover

Cartridge & Stylus
• Replacement Stylus ATN3600L

Bluetooth®
• Output Bluetooth Specification Power Class 2
• Operating Range Line of sight - approx. 10 m (30')
• Compatible Bluetooth® Profiles A2DP
• Support Codec SBC, Qualcomm® aptX™

AT-LPW30TK
Manual Belt-Drive Wood Base Turntable

• Teak effect wood veneer finish
• Connect directly to speakers at home with the built-in phono preamplifier
• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminium platter with rubber mat
• AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge

Video: https://www.youtube.com/watch?v=gmWsctJ8Kzk

Der AT-VM95ML ist mit einem nackten
Microlinear-Diamanten ausgestattet, der
durch seinen speziellen Schliff und die für
Line-Contact-Nadeln typischen
geringeren Verzerrungen am Plattenende
(innere Rillen) eine doppelt so hohe
Lebensdauer gewährleistet und sich
zugleich durch einen erweiterten
Frequenzgang und eine bessere
Auflösung der mittleren und hohen
Frequenzen auszeichnet.

AT-VM95C/H
VM95 SERIES MICROLINEAR STEREO CARTRIDGE ON AT-HS6 HEADSHELL
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan

AT-VM95ML
VM95 SERIES MICROLINEAR STEREO CARTRIDGE
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

material. Aluminium cantilever
3.5mV output voltage
Compatible body with all VM95 Series stylus assemblies
20 to 25,000Hz frequency response

VM95 SERIES - STYLI COMPATIBILITY
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E SERIES COMPATIBILITY WITH THE AT-XP SERIES DJ CARTRIDGES
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

MICROLINEAR STYLUS
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

PREASSEMBLED WITH AT-HS6BK HEADSHELL
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Model AT-VM95ML
Typ VM Stereo Dual Magnet
Befestigung 1/2” centres
Frequenzbereich 20 - 25,000 Hz
Kanaltrennung 23 dB (1 kHz)
Kanalbalance am Ausgang 1.5 dB (1 kHz)
Ausgangsleistung 3.5 mV (at 1 kHz, 5 cm/sec)
Vertikaler Abtastwinkel 23°
Vertikaler Auflagekraftbereich 1.8 - 2.2g (standard 2.0 g)
Nadelschliff Microlinear
Nadelabmessungen 2.2 x 0.12 mil
Schaftform der Nadel Nude Square Shank
Nadelträger Aluminium Pipe
Spulenimpedanz 3.3 kΩ (1 kHz)
Spuleninduktivität 550 mH (1 kHz)
DC Widerstand 485 Ω
Statische Nadelnachgiebigkeit 20 x 10 – 6 cm / dyne
Dynamische Nadelnachgiebigkeit 10 x 10 – 6 cm / dyne (100 Hz)
Spulendraht T.P. Copper
Empfohlene Lastimpedanz 47,000 Ω
Empfohlene Lastkapazität 100-200 pF
Gewicht 6.1g
Abmessungen 17.2 x 18.9 x 28.3 ( H x W x D mm)
Ersatznadel AT-VMN95ML
Beiliegendes Zubehör Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver

VM530EN
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Nude profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

High-end elliptical stylus model equipped with a light-weight nude elliptical stylus to reduce the execution mass of the vibration system. This enables fuller frequency reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL NUDE STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 25,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Nude
Stylus Size 0.3 x 0.7 mil
Stylus Construction Nude Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN30EN
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM530EN_UM_V2_11L_web_161021.pdf

Due to their low weight and the option of one-ear listening, the HD 25 headphones are indispensable for mobile monitoring. The closed-back HD 25 are purpose-designed, professional monitoring headphones offering high attenuation of background noise.

Capable of handling very high sound pressure levels and of extremely robust construction, these headphones perform exceptionally well in loud environments, e.g. ENG, sound reinforcement, studio monitoring and audio equipment testing. Ideal monitoring headphones for cameramen and DJs, these are a pair of true sound professionals’ working headphones.

FEATURES

High sensitivity due to lightweight aluminium voice coils

Capable of handling very high sound pressure levels

Very lightweight and comfortable, even if used for long periods of time

Tough, detachable, single-sided cable

Rotatable capsule for single-ear listening

WHAT'S IN THE BOX?

1 HD 25
1 Screw on jack adapter 3.5 to 6.3 mm
HD 25 Plus only: 1 Pouch
HD 25 Plus only: 1 additional pair of soft earpads
HD 25 Plus only: 1 additional 1.5m straight cable

This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year. The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables. From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

Features:
• Critically acclaimed sonic performance praised by top audio engineers and pro audio reviewers
• Proprietary 45 mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Exceptional clarity throughout an extended frequency range, with deep, accurate bass response
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• 90° swiveling earcups for easy, one-ear monitoring
• Professional-grade earpad and headband material delivers more durability and comfort
• Detachable cable (3 cables included)

Specifications:
• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Frequency Response: 15 - 28,000 Hz
• Max Input Power: 1,600 mW @ 1KHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Folding/collapsible: Yes
• Weight: 10 oz (284 g) without cable/connector
• Cable - Detachable: Yes
• Cable Includes: 1.2m-3m coiled, 3m straight, 1.2m straight cables
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Accessories included: Screw-on 1/4” adapter, pouch

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market. The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.

This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.?? The new Performance Series pressings are packaged as a double set and feature a wide range of new colours.

Serato is proud to announce a new line of Control Vinyl for Scratch Live DJs with all new double packs and exclusive colors. This new line of performance vinyl features a re-mastered Serato NoiseMap™ Control Tone that is 6db louder than existing pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

The NUO 2.0 is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the mixed music style.
Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 will please all your needs thanks to its versatility and plenty of features!

Its superb sound quality and robust format, plus balanced XLR Master output and Booth output for monitoring make it also a perfect mixer for small installations.

Key features:
• 2 mixing channels
• 1 MICRO/LINE channel
• 2 PHONO inputs
• 3 LINE inputs
• Master output XLR and RCA
• Booth output RCA
• 3 band full cut EQ
• Extra large ergonomic EQ knobs
• 3 band EQ kill switches
• FX Send control per channel
• FX Pre/Post fader selector
• 45mm long life VCA faders
• 45mm long life VCA crossfader
• Fader and crossfader shape adjustment
• Crossfader Reverse and Cut-In
• Crossfader suitable for ETERNAL

Technical data:
• Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kΩ
PHONO: -40dBV/50kΩ
MICRO: -50dBV/>1kΩ
FX RETURN: 0dBV/>6kΩ

• Outputs Level/Minimum Load:
MASTER (BAL): 0dBV/600Ω 1V *(+6dB 2V)
MASTER (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
BOOTH (UNBAL): 0dBV/2.2kΩ 1V *(+6dB 2V)
REC: 0dBV/10kΩ
HEADPHONES: 200mΩ/200Ω THD 1%
FX SEND: 0dBV/2.2kΩ

• Frequency Response:
LINE: 10Hz÷30kHz -1dB
MICRO: 10Hz÷25kHz -1dB
PHONO: RIAA ±0.5dB
FX RETURN: 10Hz÷50kHz -1dB

• THD+N:
LINE: <0.07%
MICRO: <0.1%
PHONO: <0.15%
FX RETURN: <0.05%

• CMRR:
MICRO: >70dB @ 1kHz

• Signal Noise Ratio:
LINE: >95dB
MICRO: >85dB
PHONO: >90dB
FX RETURN: >100dB

• Gain control:
INPUTS 1-2: ± 15dB
INPUT 3: ± 20dB

• Tone control Inputs 1-2:
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

• Tone control Input 3:
BASS: ± 15dB
TREBLE: ± 15dB

• Kill Filter, cut frequency at –6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz÷6.8kHz
TREBLE: 6.8kHz

• Phantom voltage: +18VDC/5mA max.
• Mains: 90-264VAC 47-63Hz
• Power consumption: 30VA
• Dimensions: 370x165x80mm
• Weight: 3kg

Here is the new high quality slipsheets, "Slip 'n Slide." (4 pack) Directed by the one and only D-Styles, known for his innovative slipmat series, "Table Cloths." Also in collaboration with the top slipmat inventor and producer, of quality and manufacturing, "Dr. Suzuki." The official slipsheets have both D-Styles & Table Cloth logos on its body. Give your scratching some extra speed and control. Try this high quality slipsheet Made in Japan!!!

Motif II A.N.C. delivers 30 hours of total playtime with active noise cancelling technology, block out those crowded train rides and rowdy streets to dive into your music without distraction. For a quick conversation, switch over to transparency mode and let the outside in. Motif II A.N.C. comes ready for Bluetooth® LE Audio. This future-proof technology will ensure the best possible connection, so you’ll never miss a beat.

MOTIF II A.N.C. KEY FEATURES
• Marshall signature sound
• ANC & Transparency mode
• Iconic & rugged design
• 30 hours of wireless playtime
• Wireless charging
• Bluetooth® LE Audio-ready 

MARSHALL SIGNATURE SOUND
Take Marshall's signature sound everywhere you go with the Motif II A.N.C. Carefully engineered to give you clear, balanced sound no matter how loud you turn it up, there's no stopping you with the Motif II A.N.C. Enjoy concert-worthy sound** at any time.

ANC & TRANSPARENCY MODE
Get locked into the sounds of your choice with improved active noise cancelling technology and use the app to amplify your playlist. Savour the music that matters to you, uninterrupted. For a quick conversation, switch seamlessly into transparency mode to let the outside back in and stay in tune with your surroundings.

ICONIC AND RUGGED DESIGN
Motif II A.N.C. offers huge sound, in a tiny package. The new and improved design means that when you’re deep diving into your music, the tenth hour is as comfortable as the first. Motif II ANC features the iconic Marshall M logo on the earbuds as well as the rugged durability needed to make sure you’re always ready for the road.

30 HOURS OF WIRELESS PLAYTIME
Motif II A.N.C. delivers 10 more hours of playtime than its predecessor. With active noise cancellation and the charging case, get up to 30 hours total, and 6 hours of playtime on their own. Just place your earbuds in the case for an extra boost.

WIRELESS CHARGING
Wireless charging makes it even easier to charge and go. LED lights display the current battery level of the charging case and show when the earbuds are full. Switch to quick charge when you’re in a hurry, for 1-hour extra playtime in 15 minutes. Don’t wait, start listening.

BLUETOOTH® LE AUDIO-READY
Motif II A.N.C comes ready for Bluetooth® LE Audio. This future-proof feature will ensure the best possible connection, so you’ll never miss a beat. Feel secure knowing that once we activate it, your headphones can more than handle this next-generation Bluetooth® technology.

APP COMPATIBLE
Connecting Motif II A.N.C. to the app offers access to extra features, including controlling the ANC, activating Transparency mode, adjusting your personal EQ settings, and managing updates that keep your product up to date with our latest software.

PRODUCT DETAILS
• PLAY TIME: 6 HOURS IN EARBUDS WITH A.N.C. (9 HOURS WITHOUT) / 30 TOTAL HOURS IN CASE WITH A.N.C. (43 HOURS WITHOUT)
• ACTIVE NOISE CANCELLATION: YES
• CUSTOMISE SOUND: YES
• BLUETOOTH MULTIPOINT CONNECTIVITY: YES

Degritter MARK II offers sophisticated ultrasonic cleaning and smart functionalities for more convenient use.

New features:
• Ultrasonic Power Drive 2.0 – stronger, but safe for the record
• Pulse Mode cleaning – better cleaning effect, low power consumption
• Polished exterior design – in keeping with our high design standards

Designed For You:

DISTINCTLY AUTOMATIC
The Degritter is fully automatic, requiring no additional effort after the cleaning cycle has started. Use the free time for listening to records instead of cleaning them.

SIMPLE WATER MANAGEMENT
The machine has a convenient removable water
tank for replacing cleaning water.

PERFECT TOUCH BUTTONS
We have perfected the feel and function of the machine’s buttons. The rotations and presses provide most satisfying feel you will be unable to let go of.

Clever Features:

ACTIVE FILTERING
Cleaning water is pumped through a replaceable filter during washing. Continuous filtration keeps removed dirt from ending back up on the record.

RECORD SAFE
TEMPERATURE CONTROL
Degritter monitors water temperature and
prevents it from rising to levels harmful for vinyl records. High temperatures are managed by automatic cooling cycles.

SMART DRYING
Records are dried by a flow of filtered air. Both the drying time and fan speed can be adjusted to keep noise levels in check and to prevent static electricity build up.

POSTWASH RINSE OPTION
Degritter supports rinsing records during washing cycles with the help of a separate water tank.

Ultrasonic Cleaning Architecture:

4 TRANSDUCER LAYOUT
Ultrasonic cleaning tank that’s in Degritter is purpose built for vinyl records. The tank has two ultrasonic transducers on either side emitting 120 kHz ultrasonic vibrations, evenly distributing the cleaning energy across the record’s surface.

Power DriveTM 2.0 – NEW!

Pulse Mode – NEW!:
Pulse Mode cleaning is a feature offered by the Power Drive 2.0 ultrasonic generator. During pulsing, ultrasonic transducers rapidly switch on and off at high power. This gives enhanced cavitation in water, but keeps the average power consumption low.

Frequency Sweep:
The driving frequency of the Power Drive
ultrasonic generator sweeps between 120-125 kHz.
This evens the cavitation energy distribution in
the water, minimizing losses and giving an
uniform cleaning action.

300 Watts:
The average power output of all the washing programs is 300 W. This makes Degritter the most powerful ultrasonic record cleaner on the market per litre of water. The higher 120 kHz driving frequency keeps your records safe.

Introducing the CTRL CASE PUSH 3 - the perfect protective solution for live performers on the go. Custom designed to a hold the new Ableton Push 3 and is a very lightweight and convenient solution to carry the standalone instrument well protected to your next studio or live session. Crafted from rigid Durashock molded EVA shell and a high-density foam interior it is furthermore equipped with an accessory panel to organize power plug, audio cables and accessories.

FITS:

• Ableton Push III
• Ableton Push I
• Ableton Push

BASICS:

• Crafted from 6 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
• Sturdy zipper
• Including practical cable organizer panel
• Incl. removable egg-foam
• Compatible with Decksaver® cover

SPECS:

• Outer measures: 43 x 37 x 10,5 cm
• Inner measures: 39 x 33 x 5 cm
• Weight: 1,3 kg

The 12" Record Case offers space for up to 100 12" records, which you can optimally transport and safely archive in this record case. The lid of the DJ record case is removable and can be used as a sorting pad during DJ'ing.

The butterfly lock protects your collection from theft. Despite its very sturdy design with parts made of aluminium, plastic-coated MDF panels and rivets, the Vinyl Record Case is pleasantly light to carry. The sturdy case handle rests on top.

Since the DJ case is covered with a foam layer on the inside, records are optimally protected against impacts. Deformations due to heat and fading due to sunlight are also reliably prevented when archiving collections in the record case.

Technical details:
• Capacity: maximum 100 12" records
• Material: aluminium, plastic-coated MDF panels
• Protective metal corners safeguard against knocks and wear and tear
• Available in three colours: Silver/Silver, Silver/Black; Black/Black.
• Removable lid and butterfly lock
• Dimensions (LxWxH): 36*36*36 cm
• Weight 4,25 kg

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

The Ortofon Record Brush is designed by the Danish Industrial designer Møller Jensen Innovation and Design – the same company who designed the award winning vintage MC Jubilee cartridge, historical Kontrapunkt Series, 2M Series and the Concorde MkII range.

Cleaning your records before every use increases the lifetime of the diamond and improves your listening experience. The Ortofon Record brush safely and effectively removes dust and dirt from the record surface without scratching. • The brush features two rows of tightly bound carbon fiber bristles that are designed to remove dirt and dust from the record surface. Simply brush around the surface of a record after placing it on the turntable.
• Simple and robust two parts design: Injection moulded part uses a conductive plastic preventing any static charges. Shield used to clean and protect the brush.
• Easy to use: slides and locks into place.
• Embossed details for clarity and performance.
• Lanyard hole for convenience and store.

The Yellow Flower Slipmats are made from lightweight felt and equipped with a fresh graphic that makes you feel like the most amazing turntable artist of the world. Style meets function to the highest degree.

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

100% polyester felt, 450g, 2mm thick, Bottom surface glazed

Technical data:
• Frequency range 20-22.000 Hz
• Frequency response 20-20.000 Hz + 3 / - 1 dB
• Tracking ability at 315Hz at recommended tracking force *) 70 µm
• Compliance, dynamic, lateral 20 µm/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 µm
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,6-2,0 g (16-20 mN)
• Tracking force, recommended 1,8 g (18 mN)
• Tracking angle 20°
• Stylus colour Red
• Recommended for following cartridges 2M Red / 2M Red Verso(Interchangeable with 2M Blue / 2M Blue Verso)

Pioneer DJ - DM-40D 4" Monitor Speakers Black

The DM series speakers deliver balanced, punchy bass sound and they can pump out extra power thanks to the new Class D amplifier and 4-inch woofer in each unit. Flick the switch to change from DJ mode to Production mode and the DSP settings will automatically create the best sound for each application.

Class D amplifier
Each DM series speaker produces pure, balanced bass sound thanks to a new Class D amplifier with 96kHz sampling DSP.

DECO convex diffusers
Another advancement from the DM-40 model comes in the updated design of the DECO convex diffusers which help deliver crystal-clear high frequencies in every direction, so you can enjoy a wide sweet spot and 3D stereo sound wherever you are in the room.

Time alignment
The woofer and tweeter are perfectly aligned so you’ll hear all sound frequencies clearly

Grooved ducts
The grooves on the ducts reduce air friction so bass is tight and punchy, even if you position the speakers against a wall. Plus, the curved front edges provide maximum rigidity and minimum resonance for clean audio at any volume level.

4" Woofer
The 4-inch woofer creates powerful sound without distorting, even if you pump up the volume.

2-way sound mode - optimized for DJing and music production
There’s no need to decide whether you want a set of monitors that are best for DJing or making music, because the DM series speakers are perfect for both. Just flip the switch to choose either DJ mode or Production mode and the DSP settings will be optimized for the task, leaving you free to concentrate on your mix.

Easy to use with different DJ or production equipment
With RCA and mini jack terminals you can connect different kinds of gear such as DJ controllers and mixers, or the laptop or soundcard you use. Connecting your headphones is simple via the socket on the front panel and the level knob is right in front of you too.

What's in the Box:
• DM-40D
• Power cord
• Audio converter cable (3.5 mm stereo mini plug to RCA)
• Speaker cord
• Bottom cushion
• Quick Start Guide
• Precautions for Use
• Warranty

SPECIFICATIONS:
ENERGY MANAGEMENT
• Power consumption:0.3-25W

SPEAKER SPECIFICATIONS
• Speaker type:Active
• Acoustic principle:2-Way System
• Tweeter diameter:19mm
• Woofer diameter:102mm
• Impedance:10000Ω

AUDIO INPUTS, CODECS & FORMATS
• Audio inputs:3.5mm Jack & RCA

DIMENSIONS AND WEIGHT
• Product height:22.7cm
• Product width:22.3cm
• Product length:14.6cm
• Product weight:2.5kg
• Packsize height:35.6cm
• Packsize width:39.1cm
• Packsize length:28cm
• Packaged weight:6.1kg

FIRST-CLASS DJ MIXER
The RMX-60 Digital is a first-class mixer for any DJ application. With its extensive range of connection options, robust construction and fully-digital audio architecture; Reloop’s latest mixer takes the classic 4+1 channel mixer design and updates it to suit modern performance standards. Whether you’re using CD players, Turntables, DJ controllers or DVS systems – the RMX-60 Digital’s 11 input and 6 output options bring true versatility into the DJ booth.

ADJUSTABLE LINE- AND CROSSFADER CURVES
To suit different mixing and scratching styles the RMX-60 Digital’s line- and crossfader-curves are adjustable, and there’s also a linefader start function. The crossfader is freely assignable between all channels, and the stock fader can also be switched for the new RMX Innofader by Audio Innovate, which is specifically designed for Reloop mixers to offer a gentle, gliding performance.

ACTIVE DUCKING TECHNOLOGY
The RMX-60 Digital is a true all-round club mixer. Neat finishing touches such as the “Active Ducking Technology” for the mic channel, and the future-proof firmware system that can be retro-updated by connecting to a computer, elevate this to a mixer that can support any type of DJ for years to come.

FEATURES
• Classic 4+1 channel performance club mixer
• 11 inputs, 6 outputs
• Fully digital architecture for outstanding sound and flexibility
• 8 high-quality performance effects in studio quality (flanger, delay, echo, reverb, gate, pitch shift, phase, bit crusher, noise)
• Large, clearly arranged parameter display
• Bipolar filter per channel
• Adjustable EQ characteristics (kill & classic)
• InnoFader compatible (RMX InnoFader available separately)
• Crossfader assign switch per channel
• Mic channel with 2-band EQ & talkover ''Active Ducking Technology'' for mic channel
• 2 headphones outputs (jack and mini jack)
• Intelligent 1-knob equalizer and mono/stereo switch for headphones
• Future-proof due to innovative, updateable firmware system (USB service port)
• Fader & crossfader-start and curve adjust
• Symmetrical (XLR) as well as asymmetrical (RCA) outputs

TECHNICAL DATA
• Inputs: 2 Phono, 7 Line, 1 Combo-Mic
• Outputs: 1 XLR, 1 Jack, 2 RCA, 2 headphones
• Frequency range: 20 Hz - 20 kHz
• EQ range classic: +12 dB / -8 dB
• EQ range isolator: +12 dB / -26 dB (Total Kill)
• Dimensions: 320 x 107.5 x 386.7 mm
• Weight: 6.8 kg

Manual: https://www.reloop.com/media/catalog/product/pdf/2/3/2/232553_Reloop_IM.pdf

• Personalise your turntable with slipmats
• Provides protection for your vinyl from scuffs and scratches and also for your turntable
• Made from high quality felt, our slipmats make DJing mixing easier
• Vibration dampening qualities
• 12“ diameter

New Generation Audiophile Entry Level Turntable

Built-in Phono Stage & Electronic Speed Switch – Made in Europe

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Compared to the base T1-model, the Phono SB version includes a built-in, Pro-Ject designed, high-quality phono MM stage and an electronic speed switch between 33 and 45 RPM. For the drive system, where most alternative products may use unregulated DC motors with wide speed fluctuations, the T1 Phono SB features our proven system of an electronically regulated, precision-speed AC motor.

In the box:

T1 Phono SB with Ortofon OM 5E cartridge
Connect it E Phono Cable
Felt mat
Dust cover
Adapter for 7“ singles
Power supply
Allen key, stylus pressure gauge

Features
Precision belt-drive with accurately regulated speed stability and electronic 33/45 RPM speed change
Built-in switchable phono stage - no external phono preamp required
Anti-resonant sub-platter design
Heavy 8mm, zero-resonance blasted-glass platter
Precision CNC‘d heavy full chassis: NO hollow spaces, NO plastic
Ortofon OM5e moving magnet pickup
8,6“ highly precise and light aluminium tonearm
Low friction, vibration free tonearm bearing
One-piece tonearm design with integrated headshell
Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject
Vibration absorbing feet
Elegant dustcover with adjustable hinges
Available in High-Gloss Black, Matt White and Walnut
Hand-made in Europe

Technical Specifications
Speed 33,45 (electronic speed change)
Principle Belt drive
Speed variance 33: 0.7% 45: 0.6%
Wow & Flutter 33: 0.25% 45: 0.23%
Platter Heavy 8mm, blasted-glass platter with felt mat
Main bearing Stainless steel/brass
Signal to noise 65dB
Tonearm 8.6” aluminium
Effective arm length 218.5 mm
Overhang 22.0 mm
Effective tonearm mass 8.0 g
Counterweight for mass 5 - 10g (pre-mounted)
Tracking force range 0 - 50mN (17.5 mN pre-adjusted)
Outputs RCA Phono/Line (switchable)
Included accessories dustcover, feltmat, high quality Connect it E RCA Phono cable
Built-in Power Supply 110 - 240V/50, 60Hz; 15 V DC 800mA
Power consumption 4.5 Watt max
Dimensions 415x100x335 mm (WxHxD)
Weight 3.8 kg net

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/PJ-T1-PhonoSB-Manual.pdf

Damir x Ben Diggin Collaboration

45 rpm adapter for large hole 7" records

Kukulkan adapter comes in clear box

Material: PLA

Color: Granite

45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear numbered box

Yellow concha

Material: PLA

45 rpm adapter for large hole 7" records

SOUL in Gold

Material: PLA

45 rpm adapter for large hole 7" records

FUNK in Orange

Material: PLA

45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear numbered box

Material: PLA

45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear numbered box

Material: PLA

45 rpm adapter for large hole 7" records

Each adapter is hand painted

Individual adapter comes in clear numbered box



Material: PLA

Protective sleeves are among the indispensable basics of vinyl care. Our sleeves are Made in Germany and help to preserve the cover artwork permanently, as they significantly minimize the risk of ring wear. In addition, they protect against edge wear of the record sleeve and the vinyl itself from dust and dirt.
We recommend the transparent and robust films for any well-maintained record collection.
The vinyl LP protective sleeves are part of the Vinyl Care by HHV product range, which stands for best quality at an attractive price. In the development of our Vinyl Care products we directly incorporate the experiences of our customers at HHV.de and offer collectors and enthusiasts high-quality tools for cleaning, care and presentation of their vinyl treasures.

Record Outer Sleeve 12" Vinyl Schutzhülle - specific details:

• dimensions: 325 x 325 x 0.15 mm
• material: translucent polyethylene, 150µ
• selling unit: 50 pieces
• Made in Germany

Free from plasticizers, solvents, bisphenol A and is REACH certified.
Does not contain PFAS and PFOA. Substances from the ECHA candidate list are not included.

45 rpm adapter for large hole 7″ records
Chocolate dipped strawberry heart
Each adapter is hand painted
Individual adapter comes in clear numbered box
Material: PLA
Weight: .02 kg
Dimensions: 10.6 × 15.25 × 5.1 cm

*vinyl record not included
**Choking hazard: Keep away from small children and pets (non-edible)

minirig MRBT-4 Bluetooth Speaker

The only Speaker you will ever need with an unbelievable 100hrs of battery life!

Experience the culmination of 12 Minirig light years of evolution in design and functionality with the groundbreaking Minirig 4.

Minirig MRBT-4 Bluetooth Speaker - features/specs:

• Dimensions: W = 101.6mm H = 73mm
• Weight: 563g
• Driver: Custom 70mm with neodymium magnet
• Button x3: Power/volume/pairing/and more
• Frequency response: 60Hz - 18000Hz
• Battery life max volume: 5 Hours
• Battery life average use: 30 Hours
• Battery life low volume: 100 Hours
• Charge time (standard): 4 hours
• Charge time (fast USB-C PD): 1.5 hours
• Powerbank function: Yes
• USB-C Power Delivery: Yes (up to 30W)
• Amplifier power: 1 x 50Wrms
• Bluetooth: 5.0 with AAC, hands-free calling, linkup mode & wireless stereo
• Bluetooth Receiver Mode: Yes (line out / headphones)
• Bluetooth Range: >10-30 meters line-of-sight
• Audio input/output: 2 x 3.5mm mini jack socket
• Construction: Anodised aluminium and High Impact ABS
• Weatherproofing: Splash resistant
• Additional features: Volume control, Balance control, Accelerometer, microphone, 5x addressable RGB LEDs, USB-C PD capable, OTA updatable
• App: IOS, Android and Chrome (PC/MAC)

45 rpm adapter for large hole 7″ records
Black calavera (sugar skull) with hand painted details
Paint is black light reactive
Material: PLA

Individual adapter comes in clear box.

**Choking hazard: Keep away from small children and pets (non-edible)

Refined in every aspect.

The Evolution
The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime!

Redesigned motor suspension
We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO.

Anytime the perfect stand
Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface.

Controlled playback speeds
Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds.

DAMPED FROM THE INSIDE
Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance.
Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter.

CLEAN LOOK & NEW COLOURS
You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for.
The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations.

Ortofon 2M Red
Moving-Magnet Cartridge
2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth.

The Tonearm
8,6 inch carbon
The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

Output
Gold plated sockets
You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection.

Phono Cable
Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Suspension
Improved motor suspension
The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before.

Metal Feet
Damped & height adjustable
The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand.

1,7 kg Platter
Heavy steel and TPE damped
We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter.

33/45/78 RPM
High precision motor control
The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.

Technical Specifications:
•Nominal speeds: 33/45 r.p.m.. *** 78 r.p.m. optional
•Speed variance: 33: ±0.50% 45: ±0.60%
•Wow and flutter: 33: ±0.17% 45: ±0.15%
•Signal to noise: 68dB
•Effective tonearm mass: 6g
•Effective tonearm length: 8.6 " ( 218.5 mm)
•Overhang: 18,5 mm
•Power consumption: 4 W/ 0 W in Stand-By
•Outboard power supply: 15V / 0 – 0.8 mA DC (set at 0.5 mA), universal power supply
•Dimensions (W x H x D): 415 x 118 x 320 mm, dust cover open 415 x 365 x 405mm
•Weight: 5,6 kg
•Dimensions packaging (W x H x D): 488 x 235 x 393 mm
•Weight incl. packaging: 8.0kg

MM-Cartridge Ortofon 2M Red:
•Frequency range: 20-22.000Hz
•Channel separation: 22dB/1kHz
•Output voltage: 5.5mV
•Recommended load impedance: 47kohms/amplifier connection – MM-input
•Compliance/stylus type: 20µm/mN – elliptical
•Recommended tracking force: 17.5mN
•Weight: 7.2g

Manual: https://www.project-audio.com/wp-content/uploads/2020/08/DebutCarbonEVO-Userguide.pdf

Black through-dyed and not printed paper inner sleeve for storing 12 inch records. This inner sleeve is unlined. Equipped with a centered die-cut hole, so label infos are available at first glance and lengthened rear lip for facilitate opening.
It's suited for 30.5 cm diameter vinyl records as well as all covers and outer sleeves of this size.

Record Inner Sleeve 12" Vinyl LP Innenhüllen (unlined) without angled corner cut - specific details:

• measures: 301/304 x 309 mm
• material: 80 g/m² black premium paper
• made of unbleached pulp, ash- and acid-free, contains no recycled content and develops virtually no dust even when frequently inserting and removing the record
• die-cut diameter: 80 mm centered
• with lengthened rear lip to facilitate opening
• Made in Germany
• selling unit: 100 pieces

In ViNyL we trust
Even before the launch of the Concorde MkII, we have always studied the feedback of our customers and how they utilize our products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge – consistently testing the boundaries in the realm of performance.

Understanding this and reflecting our extensive experience in industrial design and technological know-how, we present the new Ortofon VNL cartridge – a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

Contains 1x Stylus VNL II!

The new VNL features and improvements
• Extra resistance to hardcore scratching and back spinning
• High tracking performance for both DVS usage and real vinyl
• Optimal balance of output and of sound quality

Technological improvements have been applied for the benefits of all users:
- Ultrasonic welding of the components ensures high rigidity and freedom from resonances.
- Robotic assembly of stylus assembly offers high precision and uniformity of industrial production.

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Sperical
Tracking Force: 4,0 g
Output Voltage: 6mV
Frequency Range: 20-20.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB
Tracking ability at 315 Hz at recommmended tracking force:

VNL I 100 μm
VNL II 90 μm
VNL III 90 μm
Compliance, dynamic lateral:

VNL I 16 μm/m N
VNL II 15 μm/m N
VNL III 14 μm/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use “0”
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Exclusive features
The VNL features a spherical stylus which is perfect for tough groove handling. Furthermore, it reduces record wear when scratching and back-cueing to an absolute minimum.

The broad stance of the VNL features solid and robust design elements characteristic to Ortofon, with colors meticulously selected to emphasize sturdiness and DJ aesthetics: the cartridge body has been designed to provide easy mounting and alignment on a variety of headshells.

The VNL provides excellent compatibility when used in an assortment of playback systems, ensuring it stays in the groove under the most demanding conditions.

VNL Userguide: https://www.ortofon.com/media/151234/5-800161-12_vnl_userguide_08_20_web.pdf

This record player with external speakers and its minimalistic design has a satisfying listening experience due to the aluminium platter, NP15 diamond needle and tone arm with adjustable counterweight. In combination with the Bluetooth function the T150 record player has everything you need.

• 2-speed record player
• Plays 7”, 10” or 12” records
• 2 external speakers - 4”, 4Ω, 15W
• NP15 diamond needle
• Belt-driven
• Pitch Control
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC power adapter
• Aluminium tonearm with adjustable counterweight
• Full-size aluminium platter
• Dimensions: 40.5 cm (l), 31.5 cm (w), 5.5 cm (h)
• Speakers: 13 cm (l) 15 cm (w) 20 cm (h)
• Weight: 3.3 kg

Stylus for Goldring E3 MM Cartridge

Just needle, not the complete cartridge included!

Goldring E3

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E3 cartridge, representing the top of the range features the same aluminium cantilever as the E2, but benefits from a superior, bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it better high frequency detail retrieval over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) types due to its smaller front-to-back radius. The main effect is the reduction of sibilance, especially in high level vocal recordings

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Violet
• Cantilever: Aluminium
• Stylus profile: Elliptical
• Stylus radius: 0.3 x 0.7 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

Goldring E1

The Goldring philosophy is to promote the accurate replication of the original record production, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. With the versatile E Series, this is easy to achieve; each is designed to be simple to fit to the majority of budget to medium priced turntables.

The E1 cartridge, the first in the range, utilises a carbon-fibre reinforced cantilever and bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications.

Magnetic Duplex Technology™
All cartridges in the range feature Magnetic Duplex Technology™-a 'dual magnet' generator assembly with an identical geometry to that of the original cutting head. This means it can more accurately reproduce the stereo information in the record groove, providing better channel separation and a more involving and musical sound stage.

Expert Adjustment
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge. The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

• Colour: Red
• Cantilever: Carbon
• Stylus profile: Spherical
• Stylus radius: 0.6 mil
• Frequency range: 20 Hz - 20 kHz
• Channel balance: 1.5 dB at 1 kHz
• Channel separation: >20 dB at 1 kHz
• Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
• Static compliance: 20 mm/N
• Vertical tracking angle: 20°
• Load resistance: 47 kΩ
• Load capacitance: 100 - 200 pF
• Internal inductance: 400 mH
• Internal resistance: 410 Ω
• Cartridge mass: 6.9 g
• Fixing centres: 12.7 mm (0.5 in)
• Playing weight: 1.5 g - 2.5 g (2.0 g recommended)

SpiralKabel 3m, für alle HD-25

How to minimize the risk of ring wear of your gateold covers? Just put your vinyl goodies respectively the record sleeves in these transparent outer sleeves to keep your collection in good shape.

Record Outer Sleeve 12" Vinyl Doppel LP Gatefold Schutzhüllen - specific details:

• dimensions: 316 x 640 x 0.1 mm
• material: translucent CPP
• selling unit: 25 pieces

Single Album mit press button for 20x 7" singles.

Dimension BxTxH: 205 x 205 x 40 mm

Größe BxTxH: 205 x 205 x 40 mm

With this high clear record protective sleeve, you can minimize the risk of the record cover getting ring wear, without blurring the view to the artwork. These premium deluxe sleeves also protect against dust and dirt, they are suitable for 30.5 mm diameter vinyl records and made from transparent high clear polypropylene.

Record Outer Sleeve 12" Vinyl Records Premium Deluxe (High Clear) with flap closure - specific details:

• dimensions: 325 x 315 x 0.1 mm
• material: transparent high clear polypropylene
• selling unit: 50 Stück

OB–4 is a portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.

• bluetooth, FM–signal, line-in and disk mode
• 72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
• uv resistant paint
• compatible with ortho remote and orthoplay app
• dimensions: 232.5 x 284 x 57.5 mm
• weight: 1,7 kg

wireless loudspeaker made to play all your music, from any device. the unmistakably warm and relaxed carlsson sound has returned. pair two or more together for wireless stereo.

• compatible with all music services
• connect any instrument, turntable, gaming console or tv, for a rich sound experience
• pair your OD-11 with orthoplay, the free software remote control app
• ortho remote also available separately for wireless control
• weight: 7500 g
• dimensions: 262 x 272 x 262 mm

Carbon Fibre Tone Arm for the Stanton STX Portable Turntable.

Available with Black gimble.

Engineered to work with:

• 3K carbon fibre tube and aluminum head shell
• Billet aluminum gimbal with ball bearings
• Custom engineered limited bounce tension system
• Phono analogue pre-amp included
• Easy wire installation kit, including cartridge mounting screws
• Engineered to work flawlessly with: Ortofon VNL/OM, Reloop OM-GT and Shure M44-7

Please note: The JDDPTA-SX does not include a cartridge and stylus.

Why not get the tonearm with a Ortofon VNL Cartridge & Stylus?

Installation video can be found here:
https://www.youtube.com/watch?v=pQsXTqpkfjQ

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed glue dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark grey
• Boxes for self-assembly - screwdriver required!

A Digital DJ looking for a professional, durable case solution for your Pioneer OPUS-QUAD? Then look no further, UDG have developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer OPUS-QUAD, these cases are perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Extra space for cables or power adapter
• Convenient carry handle
• Easy grip zipper pulls

Fits:
• Pioneer OPUS-QUAD Controller + power adapter, extra cables

Specifications:
• Weight: 3,30 kg / 7.26 lbs
• Outer Dimensions (W x H x D): 98.1 x 53.5 x 15.8 cm | 38.6 x 21.1 x 6.2 inch
• Inner Dimensions (W x H x D): 97.1 x 52.5 x 14.8 cm | 38.2 x 20.7 x 5.8 inch
• Material: Durashock molded EVA foam

Spend a night listening to a rock opera on vinyl or one of the three other listening options the Rhapsody has to offer. This entertainment center comes equipped with a 3-speed turntable, CD player, AM/FM radio, and a built-in Bluetooth receiver so you can kick back and listen to your music however you’d like! The wood cabinet adds an elegant touch and features a matching lid with metal hinges to help keep dust out while not in use. Built-in stereo speakers sit behind a vintage-inspired fabric grill. With aesthetics inspired by vintage radios and elevated with golden accents, this piece will look like a piece of art on your shelf.

• 3-speed record player (33 1/3, 45 & 78 RPM)
• Plays 7”, 10” or 12” records
• 2 Built-in full-range stereo speakers | 3.5”, 8Ω, 5W
• Built-in Bluetooth Receiver
• NP6 needle
• Belt-driven
• Pitch Control
• Headphone Jack
• Cueing Lever
• CD Player
• AM/FM Radio
• Bluetooth input
• Aux in
• RCA out
• EU & UK AC Power adapter

Dimensions: 35,3 cm (w), 17,8 cm (h), 43,21 cm (d)
Weight: 5.9 kg

The RECORD BOX record tower is an innovative set of two record boxes and a register box, which are connected by means of practical adhesive points. In total, the record tower offers space for the storage and presentation of a maximum of 310 12'' records.

Ideal for DJs, record stores and the home record collection: The register box is the top component of the tower and gives you direct access to your most important records, which you can easily browse through. The stacked record boxes prove to be a space-saving storage option that keeps things tidy and organized.

Easy assembly and creative freedom: The set of three record boxes is part of RECORD BOX's unique furniture system, which allows you to make creative additions that perfectly suit your needs. The assembly is very easy, the connection is made with the non-slip glue dots, which were developed especially for this system.

Clever solutions for your individual needs: The Record Tower is available in white, grey and black. Buying the set offers you a saving compared to buying the boxes individually and gives you all the design freedom you need for your record furniture. The boxes are made of 15 mm MDF with melamine and offer you a lot of stability as well as a clear look at an excellent price-performance ratio.

Features:

• Record tower as a combination of two 12-inch 110 storage boxes and one 12-inch 100 storage register box
• Connection through non-slip silicone adhesive dots
• Favorable bundle price compared to single purchase
• Available in white, grey and black
• Space for more than 300 LPs
• Ideal for DJs, record stores, the home record collection
• Can be combined in many ways with the other products in the RECORD-BOX furniture series
• Boxes for self-assembly - screwdriver required!

Technical data:

• Material: MDF wood (15 mm) with melamine coating.
• Dimensions: approx. 36 x 36 x approx. 104 cm
• 1x 12-inch 100 storage boxes
• 2x 12-Inch 110 Storage Boxes
• 1x adhesive dots from RECORD BOX
• assembly instructions
• Weight: 12,7 kg