Pro-Ject DJ Equipment 128 Items

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Tube phono-preamplifier

Innovative miniature sized phono preamplifier with tube output and high end sound!

Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound.

Compatible upgrade power supply: Accu Box S2

Features:
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• 2x ECC83 tubes (replaceable)
• Front-sided Subsonic filter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in- and outputs
• External power adaptor and multiple internal power supplies
• Well-filtrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations and electromagnetic interference
• Available in silver or black

Technical Specifications:
• Tubes: 2 x ECC83 (12AX 7A)
• Input impedance: 10 ohms, 100 ohms, 1 kohm, 2 kohms
• Input capacitance/impedance: 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence!
• Input gain: 40 dB, 43 dB / 50 dB, 60 dB und 63 dB
• Noise floor: 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain
• THD: <0.02% at 40 dB input gain <0.05% at 50 dB and 63 dB input gain
• RIAA-equalisation curve accuracy: +/- 0.4 dB/20 Hz - 20 kHz
• Subsonic filter: at 20 Hz with 18 dB/octave
• Input: 1 pair RCA/phono sockets
• Line-level output: 1 pair RCA/phono sockets
• Outboard power supply: 18 V / 1.000 mA DC, suitable for your country's mains supply
• Power consumption: 470 mA DC, <1W in standby
• Dimensions W x H x D with sockets: 103 x 73 x 131 mm
• Weight: 410 g without power supply

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 1 on solid walls, such as Brick.

Features:
• Resonance-free wall mount for turntables & Hifi
• Playback of records free from any influence by impact noise and vibrating floors
• WMI wall mounts use rigid steel frame construction
• Height-adjustable spikes to level the board
• Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 90 x 415 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 2 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 460 x 260 x 455 mm (W x H x D)
• Surface area: 460 x 355 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 3 on solid walls, such as Brick.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black
• Material: Steel frame construction
• Dimensions: 635 x 290 x 455 mm (W x H x D)
• Surface area: 520 x 450 mm (B x D)

(comes without turntable!)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Wall mount equipment racks

Wallmount it enables record playback free from the effects of impact and vibrating floors.
We recommend installing Wallmount it 5 on less massive walls such as wood or plasterboard, as a vibration damping is integrated.

Features:
Resonance-free wall mount for turntables & Hifi
Playback of records free from any influence by impact noise and vibrating floors
WMI wall mounts use rigid steel frame construction
Height-adjustable spikes to level the board
Maximum load of 30kg

Technical Specifications:
• Colour: Matt black or walnut
• Material: Steel frame construction
• Dimensions: 460 x 60 x 425 mm (W x H x D)
• Surface area: 460 x 400 mm (B x D)

Eco-friendly record cleaning concentrate for VC-S, VC-E & VC-S2

The ultimate eco-friendly record cleaning concentrate

This new cleaning formula was developed exclusively by Pro-Ject Audio Systems. It does not contain alcohol, which may harm record surfaces. Wash it contains only high-purity components, which are 100% eco-friendly, non-toxic and non-flammable. Wash it is the first solution to clean vinyls & shellac records gentle, but efficiently. Wash it will evaporate without leaving residues on the record surface!

1000 ml (will clean about 1350 records)

Features
•New highly concentrated cleaning formula by Pro-Ject
•Wash it cleans vinyl records & shellacs
•Wash it contains only high-purity components
•Eco-friendly - Non-toxic - Non-flammable
•Record looks like new after washing
•Dissolves a wide range of impurities including fat/grease
•For very dirty records repeat the cleaning process
•Evaporates quickly and leaves zero residues
•Optimum mix ratio 1:10 to 1:20 with distilled/demineralized water - do not use tap water!
•Optimum application temperature 20 - 40 degrees (mixing ratio for warmed Wash it is 1:20)
•Optimum storage temperature 10 - 25 degrees

Eco-friendly record cleaning concentrate for VC-S, VC-E & VC-S2

The ultimate eco-friendly record cleaning concentrate

This new cleaning formula was developed exclusively by Pro-Ject Audio Systems. It does not contain alcohol, which may harm record surfaces. Wash it contains only high-purity components, which are 100% eco-friendly, non-toxic and non-flammable. Wash it is the first solution to clean vinyls & shellac records gentle, but efficiently. Wash it will evaporate without leaving residues on the record surface!

250 ml (will clean about 337 records)

Features
•New highly concentrated cleaning formula by Pro-Ject
•Wash it cleans vinyl records & shellacs
•Wash it contains only high-purity components
•Eco-friendly - Non-toxic - Non-flammable
•Record looks like new after washing
•Dissolves a wide range of impurities including fat/grease
•For very dirty records repeat the cleaning process
•Evaporates quickly and leaves zero residues
•Optimum mix ratio 1:10 to 1:20 with distilled/demineralized water - do not use tap water!
•Optimum application temperature 20 - 40 degrees (mixing ratio for warmed Wash it is 1:20)
•Optimum storage temperature 10 - 25 degrees

Eco-friendly record cleaning concentrate for VC-S, VC-E & VC-S2

The ultimate eco-friendly record cleaning concentrate

This new cleaning formula was developed exclusively by Pro-Ject Audio Systems. It does not contain alcohol, which may harm record surfaces. Wash it contains only high-purity components, which are 100% eco-friendly, non-toxic and non-flammable. Wash it is the first solution to clean vinyls & shellac records gentle, but efficiently. Wash it will evaporate without leaving residues on the record surface!

500 ml (will clean about 675 records)

Features
•New highly concentrated cleaning formula by Pro-Ject
•Wash it cleans vinyl records & shellacs
•Wash it contains only high-purity components
•Eco-friendly - Non-toxic - Non-flammable
•Record looks like new after washing
•Dissolves a wide range of impurities including fat/grease
•For very dirty records repeat the cleaning process
•Evaporates quickly and leaves zero residues
•Optimum mix ratio 1:10 to 1:20 with distilled/demineralized water - do not use tap water!
•Optimum application temperature 20 - 40 degrees (mixing ratio for warmed Wash it is 1:20)
•Optimum storage temperature 10 - 25 degrees

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Pro-Ject‘s classic turntable design reimagined!

Real high-end features – True audiophile sound

The X1 is based on the same concept as the P1, but improved in every aspect thanks to modern materials and new production methods. Inside it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the quiet-running motor. For even further improved performance, the motor is decoupled from the main plinth using a new motor suspension system. In the X1, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation.

The X1 is also better than its predecessors, thanks to the super-stiff, perfectly tempered Carbon/Alu sandwich construction tonearm. This new 8.6” tonearm design is incredibly light and stiff, with improved resistance to external interference. Finished as a one-piece, with no resonance-inducing headshell, the X1 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight, further reducing cartridge-tonearm resonances.

Supplied with a brand new Pro-Ject Pick it S2 MM cartridge, manufactured by the cartridge experts at Ortofon but voiced by the design team at Pro-Ject, it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level up the turntable and effectively isolate it from the surface it is place on. The X1‘s 8 layers of painting and the hand-polished finish guarantee its luxury appearance.

In the box:

X1 with Pick it S2 MM cartridge
Connect it E RCA Cable
Dust cover
Adapter for 7“ singles
Round drive belt for 78 r.p.m.
Power supply, allen key

Features
Speed control with electronic speed switch for ultimate speed stability
Carefully isolated motor for less vibration and noise
Sub-platter with extremely low 0.001mm bearing tolerances
Stainless steel platter-bearing with soft brass bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission
Resonance free, 1.5 kg heavy acryl platter
8,6” carbon/alu sandwich tonearm with best internal damping and TPE damped counterweight
Kardan ultra-low friction 4 pin point precision tonearm bearing
Ortofon Pick it S2 MM cartridge newly developed with Ortofon
Massive and heavy, precision CNC‘d MDF chassis
Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer
Super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables
Height adjustable, aluminium feet for massively reduced risk of acoustical feedback
Handmade in Europe

Technical Specifications
Speed 33, 45, 78 (electronic speed change)
Principle belt drive
Speed variance 33: 0.30% 45: 0.25%
Wow & flutter 33: 0.15% 45: 0.13%
Platter 20mm thick, 1.5 kg heavy acryl
Main bearing stainless steel/brass
Tonearm 8,6” carbon/aluminium sandwich
Effective arm length 218,5 mm
Overhang 18 mm
Effective tonearm mass 10,0g
Tracking force range 0 - 30mN
Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
Power consumption 5,0 watts max /< 0.3 watt standby
Dimensions 415 x 125 x 335 mm (WxHxD)
Weight 7 kg net / 9.5 kg gross weight

Manual: https://www.project-audio.com/wp-content/uploads/2019/04/X1-Manual.pdf

Uncompromised heavyweight design combined with high-end features. The big brother of our X1 sets new standards.

Real high-end features.

Azimuth & VTA - Fully adjustable
The X2 comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your X2 as you want it.

Pick it 2M Silver - High-end cartridge
This cartridge uses internal silver plated copper coils, which guarantees outstanding sonic results! The X2 is available with or without the Pick it 2M Silver.

2 kg Platter - Resonance free acryl
The perfect platform to place your precious vinyl records, guaranteeing absolute reliability in its performance and sonic character.

33/45/78 RPM - High precision motor control
A sophisticated DC/AC generator board generates clean and stable power to drive the motor. Easily change speed with the push of only a single button.

New motor suspension
A good motor by itself, is already very quiet. To get the best performance out of it, we have improved the motor suspension. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt - this way the motor chassis is effectively decoupled from the main plinth for optimal performance.

The Tonearm - 9'' Carbon-Aluminium Tonearm
Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The tonearm is then supplied with a TPE-damped counterweight.
Compared with its little brother the X1, the tonearm is longer - 9“ in length - and the tube has a wider diameter. The carbon/aluminium sandwhich construction results in better internal damping. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges.

Metal Feet - Damped & height adjustable
The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Phono Cable - Semi-balanced RCA cable
To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Technical Specifications:
•Speed: 33, 45, 78 (electronic speed change)
•Principle: belt drive
•Speed variance: 33: 0.25% 45: 0.20%
•Wow & flutter: 33: 0.12% 45: 0.10%
•Signal to noise: 70 dB
•Platter: 30mm thick, 2 kg heavy acryl
•Main bearing: stainless steel/brass
•Tonearm: 9” carbon/aluminium sandwich
•Effective arm length: 230 mm
•Overhang: 18 mm
•Effective tonearm mass: 13,5g
•Tracking force range: 0 - 30mN
•Included accessories: 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
•Power consumption: 4,5 watts max / 0.3 watt standby
•Dimensions: 460 x 150 x 340 mm (WxHxD)
•Weight: 10 kg

Manual: https://www.project-audio.com/wp-content/uploads/2021/01/X2-Manual.pdf