Jesse Dean Designs DJ Equipment 38 Items

RCA cable for your Technics turntable!

No need to worry about earthing your Technics turntable anymore!

Easy installation.

• 1m/3ft flexible soft cable
• Low oxide copper wire
• Gold contact RCA plugs
• Internal ground PCB
• Large solder pads
• Reinforced secure cable

Straight outta SoCal.

Installation video:
https://youtu.be/Pqe8UsRT-bU

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

•Surface mount LED's for long life
•Illuminates outward - no reflector
•Balanced voltage - no resistors needed
•Easy installation - soldering required
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Digital start stop button for your portable turntable!

A highly efficient start stop button kit by Jesse Dean, that only draws less than 1mA...

• No need for latching relays
• No soldering
• No noise
• Powered from the turntable motor
• PT01 series and Handytrax ready

The kit includes:

• Digital JDD start/stop controller board
• 16mm aluminum momentary button
• 400mm button wire
• x2 wire crimps

Installation video:
https://youtu.be/wIAFvCDCh-o

OEM Replacement Pitch Potentionmeter for Technics SL 1200 MkII

Easy install.

• Improved carbon element
• No zero 'detent click' for accuracy
• Super smooth
• 105mm travel
• Suitable for SFDZ122N11 or SFDZ122N11-1

An upgraded replacement platter belt for the Reloop SPIN portable turntable.

Thicker than the stock belt
Wider than the stock belt
Better grip and torque
Compatible with Vestax Handy Trax

An upgraded replacement platter belt for the Numark PT01 portable turntable.

Thicker than the stock belt
Wider than the stock belt
Better grip and torque
Compatible with all Numark PT01 Series

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Target light for your portable!

Who needs to navigate across vinyl anymore?

• Easy install
• Bright LED
• Billet aluminum black housing
• JDD power break out board

Straight outta SoCal.

Installation video:
https://youtu.be/yfmVJGAlJ2E

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

•Surface mount LED's for long life
•Illuminates outward - no reflector
•Balanced voltage - no resistors needed
•Easy installation - soldering required
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

•Surface mount LED's for long life
•Illuminates outward - no reflector
•Balanced voltage - no resistors needed
•Easy installation - soldering required
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

Carbon Fibre Handle for your PT01.

3K weave glossy carbon fiber tube handle that can be easily installed into your Numark PT01 turntable range.

- Real carbon fiber

- No drilling required

- Easy install

The Reloop SPiN Tone Arm by Jesse Dean Designs.

Straight outta SoCal.

Easy installation for your Reloop SPiN.

Engineered to work with;

- Ortofon OM style
- Reloop OM-GT
- Shure M44-7

Super stable design and accepts all magnetic cartridges!

- Constructed from FR4 fibre board
- Adjustable brass counter weight
- Front LED target light
- Phono analogue pre-amp included
- Magnetic clip for housing
- Easy wire installation kit, including cartridge mounting screws

Match it with a JDDX2R-SP SPiN contactless fader!?

Please note: The JDD-SPCB does not include a cartridge and stylus.

Installation Video: https://www.youtube.com/watch?v=NyBZpw0tuhw&feature=youtu.be&fbclid=IwAR32dn4iAJAp5fNS8pGmC8_vYDIPBIhEV_y1YNBRQYoEJ5Eeu5igEldFFHw

Contactless Fader by Jesse Dean for your Reloop SPIN turntable.

The JDDX2R-SP is the same design built of the legendary JDDX2RS-A - with extra capability!

No need to take out and calibrate each time - calibrate from the top!

It’s dual rail slide contactless element gives it durability for an aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors and circuitry. There is virtually no cleaning needed with this contactless element.

- Dual rail 45mm slider for stability and smooth action
- Magnetic sensor contactless circuitry
- Two side cut-in adjustment
- Switchable from double cut to 2 channel capability
- FR4 fiberglass PCB faceplates
- Full size fader cap by Cooler Caps!
- 30 second easy installation
- Comes with cut adjuster screw driver

JDDX2R-SP calibration instructions: http://www.zendell.uk/LINKS/JDDX2RS-A_calibration.pdf

JDDX2R-SP double cut instructions: http://www.zendell.uk/LINKS/JDDX2R-SP.pdf

Introducing the new budget build tone arm by Jesse Dean Designs!

Compatible with any PT01 or Handytrax portable turntable!
Straight outta SoCal.
Battle tested at Portablist Lounge.
Easy install.

A far superior improvement over the factory tone arm.

• Constructed from Fr4 fiberboard
• ABS molded gimbal
• Adjustable brass counter weight
• Front LED target light
• Preamp included - no soldering required
• Magnetic clip for housing

Engineered to work with almost every cartridge like:
• Ortofon OM style
• Reloop OM-GT
• M447

Please note: The JDDPTA-PCB does not include a cartridge and stylus.

JDDPTA-PCB installation video: https://www.youtube.com/watch?v=5dHAPSt4yfo&feature=youtu.be&fbclid=IwAR1xzjGcWeySRyexDii-fJI_-1S5B2lr4h6NaRTuuQ4_9uEKaECb62LDDD0

The JDDX2RS-A PT01SCRATCH Scratch Fader is a creation of Jesse Dean Designs. This Fader is a
direct replacement for the factory switch. It’s dual rail slide contact-less element gives it durability for an
aggressive environment. This long-lasting fader has no audio bleed thanks to its magnetic sensors
and circuitry. There is virtually no cleaning needed with this contact-less element. Here are the main
features of the JDDX2RS-A Pt01Scratch Fader:
Magnetic Sensor Contact-less Circuitry
Two Side Cut-in Adjustment
Dual Rail Slider for Stability and Smooth Action
Full Size Fader Knob (COOLOR CAPS), Feels Like a Full Size Mixer when Scratching.
Easy Installation with No Soldering Required!
Using highest quality components and relentless testing, we designed this Fader for the Artist that requires
the best from their gear. We feel that this Fader will keep the artist innovating and excelling in their art form.

Installation Video: https://www.youtube.com/watch?v=J5b0QzA9ZxE&feature=youtu.be

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Record Spindle Holders!

For all turntables - simply push onto the spindle and keep your slipmat and vinyl locked down!
• Soft silicon
• Pack of 5
Straight outta SoCal.

Power break out board!

Do modifications?

A break out board for your Numark PT01 turntable.

This power board allows you to connect up to 3 different modification units/products.

Perfect if you have a cross breed of modifications from different manufacturers!

• x3 JST 2.0 output plugs
• Rated for 3 amps
• Fits standard JST 2.0 cable extensions

Comes with one cable extension.

THE NEW JESSE DEAN DESIGNS JDDPTA

PORTABLE TURNTABLE TONE ARM KIT.



WITH THESE FEATURES:

• 3K CARBON FIBER TUBE AND HEAD SHELL
• BILLET ALUMINUM GIMBAL WITH BALLBEARINGS
• CUSTOM ENGINEERED LIMITED BOUNCE TENSION SYSTEM
• PHONO PRE-AMP INCLUDED
• EASY WIRE INSTALLATION KIT
• Made in SoCal, USA
CAPATABILITY:

NUMARK PT-01
NUMARK PT-01USB
NUMARK PT-01SCRATCH
VESTAX HANDYTRAX
VESTAX HANDYTRAX-USB

Weight 10 oz
Dimensions 10 x 3 x 2 in

Installation Guide:
[youtube https://www.youtube.com/watch?v=kKWMM6O2rRA?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

[youtube https://www.youtube.com/watch?v=bidUVnQ_49k?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE OR OTHER TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Carbon Fibre Handle for your Stanton SPX!

3K weave glossy carbon fiber tube handle that can be easily installed into your Stanton SPX turntable.

Real carbon fibre
No drilling required
Easy install

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Contactless Scratch Fader for your Stanton STX portable turntable.

The all new high performance fader for ultra fast cuts.

Digitally controlled.

The fader features billet aluminum rail blocks for a robust construction.

Extremely easy cut-In adjustment without having to remove your fader.
Simply calibrate your fader from the top!

45mm glider travel with standard mounting hole pattern for preferred alignment.

Kit includes:

• JDDX2R-SX fader
• Black JDD fader plate
• Black fader cap
• Mini screwdriver for cut adjustment

JDDX2R-SX calibration instructions: https://www.youtube.com/watch?v=Gm3RpM8ughI&t=3s
Stock fader calibration instructions: https://www.youtube.com/watch?v=4o4nG07CUcA