Nagaoka DJ Equipment 26 Items

RS-LP2 - 12" Vinyl LP Innenhüllen (antistatisch) (Japan Sleeves)

30,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RS-LP2 ANTI-STATIC RECORD SLEEVES

More than 35 years ago Nagaoka added them to its program under the type designation No. 102. Because they were the best. And today, in the third development generation called RS-LP2, Nagaoka still sells them - for the same reason!

More effective than any other product, the RS-LP2 prevents the vinyl from static electricity, making it easier to remove the record, protecting the groove from damage caused by dust and preventing the unsightly audible static discharge during playback. Give it a try!

• static charge is prevented
• protects your 12" vinyl records from dust damage
• the smooth cover prevents damage to your records
• one package contains 50 pieces
• Dimensions approx.: 308 x 308 mm, rounded on one side
• Made in Japan

Go to Item

JC-20 - 7" Single Vinyl Schutzhüllen (Japan Sleeves, Nagaoka Style)

12,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

JC-20 RECORD JACKET COVER

Protect your records from dirt and dust with these outer sleeves for 7" singles.

• dimensions: 190 x 190 x 0.10 mm
• selling unit: 20 pieces
• Made in Japan

Go to Item

AM-801/2 - Needle Cleanser

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Your record player needle also needs cleaning and care. Due to the air pollution caused by both external influences (traffic) and domestic factors (kitchen, smoking), a sticky film can form on your records over time. During playback, the stylus scrapes this deposit out of the record groove, which in turn creates a sticky film around the tip of the stylus, which in turn traps other dirt and dust on your record.

These deposits not only affect sound quality, but can even damage your favorite records. Nagaoka AM-801's special formula efficiently dissolves and removes any sticky substances trapped on the needle.

Go to Item

JN-P110 - Stylus

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for Nagaoka MP-110.

To exchange the needle of the MP 110, simply pull off the needle carrier of the system and replace it with the JN-P 110.

Go to Item

SP-558 - Record Cleaning Spray

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Cleaning spray for records. The high cleaning effect suppresses static electricity. Wipe dry after spraying.

Go to Item

CLV-30 - Record Cleaning Cloth

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The CLV-30 cleaning cloths consist of a tailor-made knitted structure woven with ultra-fine fibres, which is particularly water-absorbent. There are two wipes in one package.

Go to Item

CL-120 Argento - Vinyl Record Velvet Brush

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The tightly woven velvet on the brush surface is ideal for cleaning the sound grooves of the record and also enhances the cleaning effect. Fine dust adhering to the record is removed. In addition to the CL-120 velvet brush, a special brush is supplied to keep the cleaning surface of the brush clean.

Go to Item

AD653-2 - EP-Adapter

14,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The single adapter is made of high quality milled aluminum and ensures that the EP is centered on your turntable.

Go to Item

MP-110 - Cartridge

159,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Hear the vivid sound experience that music playback offers with Nagaoka's MP-110 tonearm. Especially in the high-frequency range, the elliptical needle cut ensures better detail resolution. This creates a live atmosphere while listening, which is otherwise known from concerts.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel Separation (1kHz): >23dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P110
• Cartridge type: without head shell

Go to Item

DJ-44G - Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for Shure M44G.

This product is a NAGAOKA produced and manufactured replacement stylus for the M44G, a cartridge widely used by DJs around the world. We have received many inquiries about a replacement stylus compatible with the M44G, since we had 'GD63-44G' in our lineup. After the production of 'GD63-44G' was discontinued, we reviewed the specifications and developed a new model. The new DJ-44G has a high sound pressure, delicate, wide-range, and powerful sound while keeping main features of toughness and solidity from the original M44G replacement.

Technical data
• Vertical tracking force: 2.0-3.5 g
• Material Cantilever: Aluminum alloy
• Material Stylus tip: 0.6 mil spherical bonded diamond
• Compatible cartridge: M44G/M44-7

Go to Item

SPW-01 - Record Cleaning Water (150ml)

24,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Spraying your records with the anti-static spray will reduce crackling during playback.

Go to Item

SP-601 - Record Cleaning Spray (220ml)

29,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Cleaning spray for records

Application: Spray the record evenly at short intervals for a few seconds and then dry.

Go to Item

SP-562 - Antistatic Record Cleaning Spray

29,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Antistatic cleaning spray for records. Cleaning will reduce the frictional resistance of the needle.

Go to Item

M207-Y - Cleaning Gel

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Cleaning gel for records, floor coverings, joints, blinds or keyboards. Stubborn dirt is reliably removed. Can be used several times.

Go to Item

CLP-02 - LP Record Label Protector

36,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RECORD LABEL PROTECTOR FOR CLEANING

This product is a label protector that protects the label in the middle of the record from water when you clean your records with water.

Considering the requests and improvements received from users for the Label Protector 'CLP01' released in August 2019, the label protector, which screws onto the record label from both sides, has been enlarged to make it more manageable. At the same time, the thickness of the label protector has been reduced so that it is easier to hold.

A replacement rubber seal and a rubber plate are included in the delivery.

Go to Item

CLP-01 - LP Record Label Protector

29,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RECORD LABEL PROTECTOR FOR CLEANING

Before cleaning the record, the label protector is screwed onto the record label from both sides so that it does not come into contact with water. In this way, record labels are preserved for a long time.

Go to Item

JTS-80LB - Stylus

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus Nagaoka JTS-80LB for the pickup JT-80LB.

Go to Item

JT-80LB - Cartridge (MM) Jeweltone

229,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Nagaoka JT-80LB (Lapis Blue) cartridge with its shiny blue needle insert is the basic model of the series and features an aluminium needle carrier with a set diamond. With its open, powerful sound, it offers exceptional value for money. The cartridge unfolds its full potential after an approx. 80-hour play-in period.

TECHNICAL SPECIFICATIONS:
• Format: Moving magnet type (MM type)
• Output: 5.0 mV (5 cm / sec)
• Frequency characteristic: 20Hz-20,000Hz
• Channel separation: 23dB (1Khz)
• Channel balance: 1.5 dB or less
• Cantilever: Aluminum alloy
• Needle tip: 0.4x0.7mil Ellipse / Joined diamond
• Stylus pressure: 1.3g-1.8g
• Torridge own weight: 6.9g
• Replacement needle: JTS-80LB
• Cartridge type: without head shell

https://www.auditorium.de/attachment/STEREO_3-21_Nagaoka-Abtaster_englisch.pdf

Go to Item

JN-P150 - Stylus

239,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for Nagaoka MP-150.

To exchange the needle of the MP 150, simply pull off the needle carrier of the system and replace it with the JN-P 150.

Go to Item

JN-P100 - Stylus

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus for Nagaoka MP-100.

To exchange the needle of the MP 100, simply pull off the needle carrier of the system and replace it with the JN-P 100.

Go to Item

MP-150 - Cartridge

379,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The design of the MP-150 has been significantly refined. Higher quality magnet materials, a better cantilever and a bonded diamond ensure better tracking and detail reproduction. The bass range also sounds more balanced.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height: 18mm
• Needle cut: Elliptical 0.4x0.7mm
• Needle carrier: stiffened cone aluminum tube
• Frequency response: 20 - 20,000 Hz
• Output voltage (1kHz, 5cm/sec): 4.5mV
• Channel separation (1kHz): > 24 dB
• Channel balance (1kHz): < 1.5 dB
• Needle compliance: 20 µm/mN
• Recommended tracking force: 18 mN (15-20 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P150
• Cartridge type: without head shell

Go to Item

MP-100 - Cartridge

129,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

With its round diamond, the MP-100 cartridge is particularly suitable for older records. Even scratches and dirt do not affect the pleasant, neutral sound that this system makes possible. The MP-100 is the most affordable scanner in the MP range.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height 18mm
• Needle cut: Round 0.6mm
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel separation (1kHz): > 22 dB
• Channel balance (1kHz): < 2.0 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 21 mN (18-23 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P100
• Cartridge type: without head shell

Go to Item

G JN-03D - Stylus

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement stylus Nagaoka G JN-03D for the pickup DJ-03HD.

Go to Item

DJ-03 HD - Cartridge (MM)

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

DJ-03 HD - CARTRIDGE INCL. HEADSHELL

This is the Nagaoka DJ cartridge. With a high output voltage of 6 mV and a recommended tracking force of 3 - 5 g, it is one of the more stable of its kind.

TECHNICAL SPECIFICATIONS:
• Cartridge type: MM
• Configuration: Climax DS/DSM
• Output voltage: 6 mV (5 cm/sec.)
• Frequency Characteristics: 20Hz~20KHz
• Channel separation: 20 dB (1 kHz)
• Channel balance: 2 dB or less
• Load resistance: 47 kΩ
• Load: 100pF
• Cantilever: aluminum alloy
• Needle Tip: 0.6 mil tapered bonded diamond
• Recommended tracking force: 3~5g
• Pickup weight: 5.1g
• Weight with headshell: 15.1g

Go to Item

GRS-LP10 - 12" Vinyl LP Innenhüllen (Japan Sleeves)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

• Made from environmentally friendly glassine paper
• including fold-over flap
• perfect for long term storage of high quality vinyl
• 10 pack
• for records with a diameter of 12' (30.48cm), dimensions approx.: 308 x 308 mm
• Made in Japan

Go to Item

CEP-01 - Single Record Label Protector

34,19 €* 36,00 € -5%