Turntables 297 Items

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

analogis Mini Leveler made from acrylic - the perfect tool to level HiFi equipment and speakers or to adjust the tone arm.

An alignment protractor is used to find the correct distance from stylus tip to tonearm pivot.

When aligning a cartridge for tangency using the alignment protractor, it is essential to remember that you are attempting to align the cantilever (and, hence, the stylus), not the cartridge body. There is no guarantee that the cantilever is perfectly aligned within the cartridge body, so simply aligning the cartridge body will not necessarily produce the desired result.

Furthermore, many cartridge bodies have non-parallel sides, making tangential alignment of the cartridge body with the lines of tangency on the gauge virtually impossible.

An alignment protractor is a plastic template onto which are printed the null point(s) and lines of tangency against which the cartridge should be aligned. The template is placed over the turntable's spindle (made possible via a spindle-sized hole drilled in the template) and placed against the platter.

Cartridge must be adjusted until the cantilever is parallel to the set of parallel lines. And this should be achieved for both the indicated points. When the cartridge's longitudinal axis is parallel with the horisontal lines, tracking error will be at a minimum.

Carbon Fibre Handle for your PT01.

3K weave glossy carbon fiber tube handle that can be easily installed into your Numark PT01 turntable range.

- Real carbon fiber

- No drilling required

- Easy install

The Ortofon Libelle is a water level that helps to adjust the head shells or to counterbalance the turntables, CD player and other high fidelity equipment.

The Ortofon Tonarmwaage is a scale that helps to adjust the perfect tone arm weight. A great tool for perfectionists! Range: 0.8 up to 3.0 g.

Premium Alignment Tool

Your go-to precision companion for perfecting your turntable setup. Crafted to the highest standards, this tool is a larger and sturdier version, boasting a remarkable 75% increase in rigidity compared to the standard model.

The Premium Cartridge Alignment Tool features a robust build, providing enhanced durability and stability during the alignment process. Its larger size ensures a more secure grip and heightened accuracy.

With two zero points Baerwald alignment, this tool is engineered to deliver optimal tracking performance. Achieve precise cartridge alignment for accurate playback, allowing you to experience your vinyl collection with unparalleled clarity and fidelity.

How to use the alignment tool:
https://ortofon.com/pages/alignment-tool

An upgraded replacement platter belt for the Reloop SPIN portable turntable.

Thicker than the stock belt
Wider than the stock belt
Better grip and torque
Compatible with Vestax Handy Trax

An upgraded replacement platter belt for the Numark PT01 portable turntable.

Thicker than the stock belt
Wider than the stock belt
Better grip and torque
Compatible with all Numark PT01 Series

Carbon Fibre Handle for your Stanton SPX!

3K weave glossy carbon fiber tube handle that can be easily installed into your Stanton SPX turntable.

Real carbon fibre
No drilling required
Easy install

Power break out board!

Do modifications?

A break out board for your Numark PT01 turntable.

This power board allows you to connect up to 3 different modification units/products.

Perfect if you have a cross breed of modifications from different manufacturers!

• x3 JST 2.0 output plugs
• Rated for 3 amps
• Fits standard JST 2.0 cable extensions

Comes with one cable extension.

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Jesse Dean Face Plate for your Stanton STX portable turntable.

Swap out your stock or JDDX2R-SX face plate with one of these!

Available colours:

Black
Blue
Red
White

Omni Portable Turntable Tone Arm Tension Mod by Tiny Steppa

Enhance Durability. Unleash Potential.

"The tone arm tension design in the Omni is actually very simple, with the two rubber bands doing their job well. However, we're aware that rubber bands can become hard and lose elasticity over time, much like changing a platter belt after a long while. This modification gives you an option to enhance durability, and elevate Omni's potential."

Easy stylus weight adjustment: Fine-tune the stylus weight with your fingertips.
Tone arm protection: Nylon screws prevent tonearm coating damage during setup.
Simple installation: Quick and user-friendly assembly.
Tool kit included: All necessary tools are in the package.
Omni certified: Meets quality and compatibility standards.

Installation video can be found here:
https://www.youtube.com/watch?v=ctHskU8k67c

Watch the adjustment video here:
https://www.youtube.com/watch?v=TDKhq1hTC3s

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Jesse Dean Decal Kit for your Stanton STX portable turntable.

Swap out or cover your stock blue decals!

Available colours:

Black
Red
White

Need more control with your Reloop SPiN when trying to balance vinyl and audio levels?

When using a third party fader for your SPiN - get the most from your redundant stock fader!

Simply plug the OEM RSVCB inline with the stock fader and configure the switch settings accordingly!

•Easy installation
•No soldering
•Switch between Vinyl, Aux or Crossfade
•Vinyl volume control - default

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

•Surface mount LED's for long life
•Illuminates outward - no reflector
•Balanced voltage - no resistors needed
•Easy installation - soldering required
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

•Surface mount LED's for long life
•Illuminates outward - no reflector
•Balanced voltage - no resistors needed
•Easy installation - soldering required
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

Replacement Technics LED Target Lights!

Switch up from the standard stock Technics target light.

•Surface mount LED's for long life
•Illuminates outward - no reflector
•Balanced voltage - no resistors needed
•Easy installation - soldering required
• Suitable for SL1200MK2, SL1200MK3, SL1200M3D, SL1210MK2

Installation Video: https://www.youtube.com/watch?v=5FNUq3_bWY4&feature=youtu.be

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Jesse Dean Corner Pads for your Stanton STX portable turntable.

Swap out your stock blue corner pads!

4mm silicone pads with adhesive back
Durable finish
Pack of 8, for top and bottoms
Colours availabe
Black
Grey
White

Single puck

Precision machined single record puck!

Fits all brands and types of turntables and places your 7“ vinyls exactly centrally on the turntable. Adapt it is made from non-magnetic metal, that makes it look first-class. Unlike cheap plastic solutions the Adapt it is unbreakable!

Features:
• Adaptor for use with 7-inch single records
• Locates record centrally on turntable
• No plastic - precision CNC-machined
• Non-magnetic aluminum
• Suitable for all brands and types of record players

Technical Specifications:
• Material: Aluminum, CNC twisted
• Diameter: 38 mm
• Height: 10 mm

The UDG Turntable Dust Cover Black made from high quality material with exclusive UDG logo's printed in plastisol ink will be the best choice to protect your turntable from from dust and liquid drops.
Size: approx.cm: 49 x 39 x 16 | inch: 19.3 x 15.3 x 6.3
Fabric: water-resistant nylon 210D.

Bearing lubricant

How to use Grease it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Grease it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some grease off your turntable to keep it looking clean.

Please only use Grease it for turntables with inverted bearings, like RPM Line, Xtension models and Signature Line.
For non-inverted bearings you should use Lube it.

Features:
• To be used with inverted bearings
• Helps a smooth movement
• Pre-filled syringe
• Easy handling

Amount: 2.3 ml

This small level gauge is a great aid in accurately checking and setting the cartridge VTA and Azimuth.
Weight: 0,64 g

A universal stroboscopic disc used to show the running speed of the turntable at 33 and 45 RPM with a spindle radius guide.

High-tech lubricant for constant velocity

How to use Lube it:
A turntable is a delicate instrument and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time. This is caused by many factors, such as climate and humidity. Therefore we cannot give a recommended time as to when to replace the lubrication. Best is to keep it constantly lubricated. With Lube it you can keep the bearing of your turntable smooth for a perfect playback. We recommend to keep your turntable constantly moving, as this guarantees a smooth bearing. This however will lead to metal abrasion, so you will need to change the lubrication more often. As to how much you should use, we can only advise to use the amount you feel right. It can‘t be too much, worst case scenario is you will have to clean some lube off your turntable to keep it looking clean.

Please only use Lube it for turntables like Elemental, Primary, T-Line, Essential, Debut, The Classic, Juke Box & X1/X2.
For inverted bearings like RPM Line, Xtension models and Signature Line please use Grease it.

Features:
• Helps a smooth movement
• Easy handling

Amount: 5 ml

Level Gauge - Basic
High precision gauge, calibrated.

RCA cable for your Technics turntable!

No need to worry about earthing your Technics turntable anymore!

Easy installation.

• 1m/3ft flexible soft cable
• Low oxide copper wire
• Gold contact RCA plugs
• Internal ground PCB
• Large solder pads
• Reinforced secure cable

Straight outta SoCal.

Installation video:
https://youtu.be/Pqe8UsRT-bU

Stroboscope disc

Control of turntable speed.

Strobe it shows circular arranged dashes that are assigned to speed and frequency. Please remember the ring that matches your desired speed and frequency (33 1/3 rpm with 50 Hz and 45 rpm with 50 Hz are valid for Europe). Put Strobe it on the turntable platter and start the turntable. The tonearm remains in its initial position. Align a mains powered light source directly to the turntable with Strobe it rotating. The dashes of the previously pinned ring should now give the impression to stand still. If they seem to move slightly forward or backwards, the speed is either too high or too low. Please note: Use normal mains operated lamps. Daylight, fluorescent lamps (energy saving lamps) as well as flashlights and LEDs, which are operated with direct current, are not suitable.

Digital start stop button for your portable turntable!

A highly efficient start stop button kit by Jesse Dean, that only draws less than 1mA...

• No need for latching relays
• No soldering
• No noise
• Powered from the turntable motor
• PT01 series and Handytrax ready

The kit includes:

• Digital JDD start/stop controller board
• 16mm aluminum momentary button
• 400mm button wire
• x2 wire crimps

Installation video:
https://youtu.be/wIAFvCDCh-o

Flat belt
Drive belt for concept, concept active, Performance DC and Ovation.
Dimension: 160 × 4 × 0,8 mm

Smooth running of the record ensures high sound quality without acoustic disturbances. Our aluminum record stabilizer weighs 420 g and distributes the weight evenly on the record. The increased contact pressure of the vinyl on the turntable ensures more even scanning.

You can use the Stabilizer universally for all turntables. We deliver the weight including a box for safe storage.

Vinyl Care by HHV was developed for the special needs of passionate vinyl collectors. Each product incorporates the experience and wishes that we at HHV have gathered in countless conversations with customers. All Vinyl Care products are delivered in stylish packaging and are also suitable as a gift idea for record lovers.

Our popular aluminium record stabilizer is finally available in the trendy color gold. The 416-gram stabilizer weight can be used universally for all record players. It increases the contact pressure of the record on the platter and thus ensures more even tracking. The stabilizer is supplied in a practical storage box.
We have developed the Vinyl Care by HHV product range especially for vinyl collectors who are looking for practical and stylish care products for their records. All products make excellent gifts.

Tonearm gauge
The easiest way to adjust the cartridge's Tracking Force.

Pro-Ject standard dust cover Type 1, suitable for chassis like Debut, 1, 1.2, Xpression.

OEM Replacement Pitch Potentionmeter for Technics SL 1200 MkII

Easy install.

• Improved carbon element
• No zero 'detent click' for accuracy
• Super smooth
• 105mm travel
• Suitable for SFDZ122N11 or SFDZ122N11-1

Spirit level

Spirit level for optimum positioning of a turntable.

Machined aluminium housing turntable leveler that provides a precise level for horizontal adjustment of the turntable.

Dustprotector for turntable
The Clearaudio Dustprotector is not only an eye-catcher on your turntable, it also prevents the accumulation of dust on the turntable, so you don't have to clean the platter before using it.

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

The Classic Plate is the upper half of the Plate X One. An additional X One is needed.

Suitable for: Numark PT01, Numark PT01 Scratch, Numark PT01 USB
Material: aluminum

Attention: only the plate!
The X One must be ordered separately: item 845663

760 g layer weight to stabilize vinyl records.
Ø 70mm

760 g layer weight to stabilize vinyl records.
Ø 70mm

Fits Pioneer PLX-1000, PLX-500 and Technics SL-1200/1210 Mk1, Mk2, Mk3, Mk4, Mk5, Mk5G & Mk6 turntables. Designed and engineered in the UK. Sleek smoked/clear polycarbonate shell provides high level of protection, preserving the lifespan of your turntable. Simple push fit design shields tone-arm from accidental damage whilst making allowances for cables, your turntable can sit ready for operation. At home, on the road or in the club, Decksaver has your turntable covered.

Weight: 0.633 kg
Cover Dimension 45.6 × 35.5 × 7.5 cm
Fits: Technics SL-1200, SL-1210 (MK1-MK7/GR), Pioneer PLX-1000, PLX-CRSS12 and Mixars LTA/STA, Germini PT1000 turntables

Ortofon’s new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analyzing cartridge performance as well as its interaction with your tonearm and turntable.

Before testing your cartridge, please verify the HiFi system’s functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room.
The Test Record is designed to be played through your system with in-built RIAA equalization. Volume control is recommended to be set at a moderate signal level.

Please refer to your turntable and tonearm’s instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and antiskating according to the cartridge’s recommended technical data, and adjust stylus overhang.

The new 15-track fine pressing

Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15:

1. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
2. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
3. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
4. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB)
5. Reference tone 1000 Hz 5 cm/sec rms Left
6. Reference tone 1000 Hz 5 cm/sec rms Right
7. Reference tone 1000 Hz 5 cm/sec rms Left
8. Reference tone 1000 Hz 5 cm/sec rms Right
9. Tracking ability, lateral 50 ?m peak
10. Tracking ability, lateral 60 ?m peak
11. Tracking ability, lateral 70 ?m peak
12. Tracking ability, lateral 80 ?m peak
13. Tracking ability, lateral 90 ?m peak
14. Tracking ability, lateral 100 ?m peak
15. Square Wave Form 2.7 msec duty cycle 3:7
* The record has a constant velocity amplitude throughout the sweep.

1-4 Frequency sweep – a tool for checking frequency response
There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep.

5-8 Reference tone for testing channel output
With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable.

9 -14 Tracking ability test, 315 Hz lateral modulation
These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micrometers. Please refer to your cartridge’s tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilized. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained.

15. Square Wave Form 2.7 msec duty cycle 3:7
When monitoring the output of your cartridge with an oscilloscope you’ll then see a square wave located precisely above each other if the connection from the cartridge is correct.

After successful completion of the above test procedures, you can ensure that your cartridge is optimized. Still the human ear is very sensitive to difference in tone distortion; its level depends on the stylus condition and record wear.

To maintain optimal sound reproduction and to minimize wear on your records as well as on your stylus, we recommend the following procedure before and after each playback:
• Remove dust carefully from record surfaces by using a fine antistatic brush or cloth before every use.
• Please remember to remove dust from the diamond tip before and after playback of each record
• I order to keep electrical contacts clean and to lubricate the knurled nut on the tonearm, Ortofon recommends occasionally a light spray of contact cleaner like DeoxIT ®Gold G-Series into the tonearm socket.

It should be noted that some phono equalizers may generate some tone distortion, which cannot be referred to the cartridge.

User Guide: https://www.ortofon.com/media/148619/ortofon-test-record-user-guide.pdf

AT618a
Disc Stabiliser

• Holds record firmly in place stabilising the record
• Thick rubber construction
• 600g

Stabilize your records

Reduces unwanted resonances & improves playback of warped records. The label is protected by the felt pad on the underside.

OPTIMIZED PLAYBACK OF YOUR RECORDS
This Record Puck PRO ensures a firm fit between the record and the turntable. Record pucks use weight to secure a record against the turntable. This improves the sound performance of the turntable in terms of timing and sound depth.

Technical Specifications:
• Material: Nickel-plated aluminium
• Weight: 190g
• Diameter: 78mm
• Height: 16mm

Dust Cover RP-1000/2000/4000/ +MK2

FEATURES
• Hinged dust cover
• Suitable for Reloop RP-1000/2000/4000 MK1 and MK2
• Sturdy rigid plastic cast

TECHNICAL DATA
• Dimensions: 442 x 68 x 348 mm (358 hinge seat)
• Incl. two hinges

OFFERED IS JUST THE DUST COVER WITHOUT TURNTABLE!

The Stand One was developed to use a Portablismturntable at the same height as a normal mixer or turntable. It is made of aluminium and each foot can be adjusted individually. Therefore it adapts perfectly to any surface.

Weight: 810g

Delivery without Numark PT01 Scratch.

An easy to use tool that quickly corrects undersized spindle holes – fitted with an ergonomic aluminum handle.
Diameter (Ø): 7.3 mm

Stroboscope Testrecord for optimum control of the absolute speed

The tool to tune the optimal and exact speed of your turntable. The Stroboscopes break-in groove creates the additional stylus drag necessary to accurately measure the real-time speed of your turntable, and can also be used to break in new cartridges.
For the best possible accuracy, use in combination with our Speed Light.

Manual: https://clearaudio.de/_assets/_pdf/manuals/accessories/CA_Stroboscope%20Testrecord_E+D.pdf

Level Gauge - Stainless steel
High precision gauge, calibrated.

Ortofon Record stabilizer - Black - 240 g

The Ortofon Record Stabilizer is offered in two versions: Standard and Heavy, meticulously designed to seamlessly complement a variety of turntables. Completely reengineered, these stabilizers boast an elegant aesthetic and user-friendly functionality. No preparations are needed; simply place the stabilizer on the record before playback to experience improved playback with reduced vibration.

Crafted with precision, the Ortofon Record Stabilizer comes in a premium satin matte anodized finish, available in Silver or Black, featuring the distinctive Ortofon textured wave-grip. The Standard version is ideal for entry-level and sub-chassis turntables, made from aluminum with a smooth felt underside.

Enhance your vinyl listening experience effortlessly with the Ortofon Record Stabilizer, where form meets function for optimal sound performance.