DJ Equipment 1960 Items

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

JDDPTA Portable Turntable Carbon Tone Arm Kit (incl. pre-amp)

119,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

THE NEW JESSE DEAN DESIGNS JDDPTA

PORTABLE TURNTABLE TONE ARM KIT.

WITH THESE FEATURES:

• 3K CARBON FIBER TUBE AND HEAD SHELL
• BILLET ALUMINUM GIMBAL WITH BALLBEARINGS
• CUSTOM ENGINEERED LIMITED BOUNCE TENSION SYSTEM
• PHONO PRE-AMP INCLUDED
• EASY WIRE INSTALLATION KIT
• Made in SoCal, USA
CAPATABILITY:

NUMARK PT-01
NUMARK PT-01USB
NUMARK PT-01SCRATCH
VESTAX HANDYTRAX
VESTAX HANDYTRAX-USB

Weight 10 oz
Dimensions 10 x 3 x 2 in

Installation Guide:
[youtube https://www.youtube.com/watch?v=kKWMM6O2rRA?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

[youtube https://www.youtube.com/watch?v=bidUVnQ_49k?version=3&rel=1&fs=1&autohide=2&showsearch=0&showinfo=1&iv_load_policy=1&wmode=transparent]

PLEASE NOTE:THE WARRANTY FOR YOUR PT01 SCRATCH PORTABLE OR OTHER TURNTABLE IS NO LONGER VALID ONCE INSTALLING THE JDDX2RS.

Go to Item

Magma

Rolltop Backpack III

119,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ROLLTOP BACKPACK III

The Rolltop Backpack III is an extremely rugged, entirely weather-proof and multi-functional backpack that is suitable for a wide variety applications. From carrying your DJ- equipment, to convenient carry-on luggage, or just as a regular daypack, the Rolltop Backpack III does it all well. Its bicycle messenger inspired design features a variable “rolltop” opening that gives you an extra 24 cm when unfolded to fit oversized gear like the Pioneer DDJ-SX2/DDJ-RX, the Numark NS-6, 2-octave keyboard controllers, or even multi-effect pedals.

FITS
Pioneer DDJ-SX2
Pioneer DDJ-RX
Pioneer DDJ-SR
Pioneer DDJ-RR
Pioneer DDJ-S1/T1
Pioneer DDJ-Ergo
Pioneer XDJ-R1
Pioneer XDJ-Aero
Roland DJ-808
Denon MC-7000
NI Kontrol S8
NI KOntrol S4
NI Kontrol S5
Numark NS6
Numark 4Track
Numark N4
Numark Mixdeck Quad
Numark MIxtrack Pro III
Numark IDJPro
Reloop Mixon4
Reloop Terminal Mix 8

BASICS
Crafted from hardwearing and 100% waterproof PVC Tarpaulin
PVC-coated (waterproof zippers)
Especially designed to carry the MAGMA CTRL CASE series
Flexible height adjustment through variable Rolltop Closure
Zippered side access laptop compartment with waterproof zippers
Two accessory pockets with waterproof zippers
Ergonomic padded back panels, s-curved backpack straps, chest strap and hip belt
Hand-luggage compatible (up to 56 cm height)

SPECS
+ Outer dimensions: 53-75 x 33 x 20 cm
+ Inner dimensions: 51-70 x 32 x 19 cm
+ Weight: 1,7 kg

Go to Item

L-30

112,49 €* 149,99 € -25%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs

Go to Item

LS-50

149,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Wooden turntable with built-in speakers

EN

• Wooden turntable with built-in speakers

• Platter with a diameter of 300 mm

• USB Port for PC connection to convert vinyl
to digital format

• Integrated stereo amplifier

• 2 built-in speakers

• RCA line output

• 3 rated speed settings 33, 45 and 78 RPM

• Ceramic Cartridge

• Adjustable counterweight

• Belt drive

• Removable plastic dust cover

• MDF cabinet

• Included : spare stylus

• Power source: DC12V, 1A

• Power consumption max : 12W

• Dim. unit : 410 x 330 x 118 mm (WxDxH)

• Net /Gross Weight: 3,40 kg / 4,45 kg

• Master carton quantity : 2 pc

• EAN-code: 87.11902.03574.9 (GY)
87.11902.03575.6 (WD)
Container quantity :
20’ ft : 560pcs
40’ ft : 1120pcs
40’ ft HQ : 1340pcs

Go to Item

L-30

149,99 €*

Show And Listen Flip Frame

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Display Your Records

24,99 €*

Show And Listen Flip Frame

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Show & Listen LP Frame gives you the opportunity to display your favourite vinyl albums and their playable contents on your wall. With this record frame design, you can change over your display within seconds, without having to remove the frame from the wall. This is done by a quick release system so a simple press on the catch at the top and the frame opens.

Go to Item

Display Your Records

24,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

THE SHOW & LISTEN FLIP FRAME’S EASY OPENING MECHANISM ALLOWS THE CONTENTS TO BE CHANGED
WITHOUT REMOVING THE FRAME FROM THE WALL.
VINYL LP’S CAN BE DISPLAYED DUE TO THE “SPONGE FINGER” CUSHIONING BACKPLATE,
FROM 12” SINGLES, LP’S, DOUBLES AND EVEN TRIPLE ALBUMS.

Go to Item

LS-50

149,99 €*

The Book Of Souls Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Iron Maiden

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

An officially licensed Slipmat Set featuring the Iron Maiden 'The Book Of Souls' design motif. Each set of fabric DJ turntable slipmats contain a pair of slipmats. Screen printed on black fabric.

Go to Item

JDDRCA - Technics Internally Grounded RCA Cable

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

RCA cable for your Technics turntable!

No need to worry about earthing your Technics turntable anymore!

Easy installation.

• 1m/3ft flexible soft cable
• Low oxide copper wire
• Gold contact RCA plugs
• Internal ground PCB
• Large solder pads
• Reinforced secure cable

Straight outta SoCal.

Installation video:
https://youtu.be/Pqe8UsRT-bU

Go to Item

JDDPBB - Numark PT Power Breakout Board

11,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Power break out board!

Do modifications?

A break out board for your Numark PT01 turntable.

This power board allows you to connect up to 3 different modification units/products.

Perfect if you have a cross breed of modifications from different manufacturers!

• x3 JST 2.0 output plugs
• Rated for 3 amps
• Fits standard JST 2.0 cable extensions

Comes with one cable extension.

Go to Item

JDDSSB - Digital Start Stop Button Kit

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Digital start stop button for your portable turntable!

A highly efficient start stop button kit by Jesse Dean, that only draws less than 1mA...

• No need for latching relays
• No soldering
• No noise
• Powered from the turntable motor
• PT01 series and Handytrax ready

The kit includes:

• Digital JDD start/stop controller board
• 16mm aluminum momentary button
• 400mm button wire
• x2 wire crimps

Installation video:
https://youtu.be/wIAFvCDCh-o

Go to Item

JDDSSB - Digital Start Stop Button Kit

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

JDDTGT - Portable Target Light With Power Board

7" Control Vinyl Performance-Serie

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Target light for your portable!

Who needs to navigate across vinyl anymore?

• Easy install
• Bright LED
• Billet aluminum black housing
• JDD power break out board

Straight outta SoCal.

Installation video:
https://youtu.be/yfmVJGAlJ2E

Go to Item

Serato

31,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Concorde MkII MIX Single

99,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
• It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
• With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - MIX

Video: https://youtu.be/4nSIq_jTUKQ

Go to Item

Concorde MkII MIX Twin

189,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII MIX Stylus

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Recommended exclusively for Concorde MkII MIX

Attention: Matches the new Concorde MkII only!

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Exchangeable reinforced finger lift
• Tapered shape, robustness where needed
• Metal ring is “unbroken”
• Colour options: Red, Black, Yellow and Orange
• Wider grip area
• Grip texture
• Graphics area

The new finger lift is one of the major improvements: it’s now stand alone replaceable part.

Available in Black, Red, Orange and Yellow colors which is perfect to personalize the cartridge the way you want it.

Go to Item

Concorde MkII DJ Single

129,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Excellent groove handling
The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

• The DJ is great for any style of music.
• It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
• Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DJ

Go to Item

Concorde MkII DJ Stylus

45,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DJ

Attention: Matches the new Concorde MkII only!

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII DIGITAL Single

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding
• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

Video: https://youtu.be/nO6b2q2FqQA

Go to Item

Concorde MkII DIGITAL Twin

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII DIGITAL Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII DIGITAL

Attention: Matches the new Concorde MkII only!

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII SCRATCH Single

149,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.
• The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.
• For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
• Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - SCRATCH

Video: https://youtu.be/hPQNkhzZuBQ

Go to Item

Concorde MkII SCRATCH Twin

289,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII SCRATCH Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The new stylus features
Replacement stylus offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

• Larger, wider and more robust stylus body
• Easier to grip and handle
• Better fix by metal spring
• Tactile feedback of correct mount
• Large stylus viewing cut‐out

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 120 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Recommended exclusively for Concorde MkII SCRATCH

Attention: Matches the new Concorde MkII only!

Go to Item

Concorde MkII CLUB Single

169,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g

Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

Video: https://youtu.be/WZnFkEwAnCo

Go to Item

Concorde MkII CLUB Twin

329,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Concorde MkII CLUB Stylus

69,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

Audio Anatomy

Vintage LP Rack (40)

24,99 €*

Pocket Operator PO-35 SPEAK Vocal Synthesizer und Sampler

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

LP RACK

Holds up to 40 LPs

Measurements: 32 x 29 x 18 cm
Weight: 660g

A beautiful revisitation of a classic 70’s vintage design. A quick and inexpensive solution to store your valued vinyl.

Go to Item

Teenage Engineering

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Pocket Operator PO-33 K.O! Micro Sampler

Teenage Engineering

88,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Coming Soon

Serato x Lefto

Lefto Control Vinyl

64,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disco-Antistat Gehäuse mit 2 Bürstchen - Generation 2

Knosti

Vinyl Nassreinigungsarm-Set

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Replacement case for our Disco Antistat record cleaning machine Generation II, with two brushes, without drying stand.

Made in Germany!

Go to Item

analogis

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Disco-Antistat Schallplatten-Waschgerät (Set)

Knosti

59,99 €*

Reinigungsflüssigkeit (Konzentrat für 1 Liter)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Practical care set for basic cleaning. Lasting antistatic effect with Disco-antistat mixture, a special self-acting liquid that removes dust, dirt and dried liquids groove-deep and without residue.

Made in Germany!

Go to Item

Okki Nokki

13,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

record cleaning fluid (concentrated good for 1 liter)

Go to Item

Technics

12" Vinyl BackBag

49,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-06-14

The Technics 12" Vinyl BackBag offers three carry options: Ether you carry your vinyl goodies in a backback, shoulder bag or as a case. The Technics 12" Vinyl BackBags grabs 60 12 inch records, so it's large enough for a DJ set or extensive digging trips.

Technics 12" Vinyl BackBag - features:

• Technics logo embroidery
• sturdy construction
• front pocket for cell phone
• accessories front compartment
• removable shoulder strap
• weight: approx. 1.090 g

Go to Item

Winyl

PRO-CLEAN-6 All purpose

26,09 €* 28,99 € -10%

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PRO-CLEAN-6 All Purpose

Concentrate Water-Based for all Recordings

Concentrate makes 6 litres of cleaning fluid with distilled water.
For Vinyl Records, Shellac (78 rpm), Lacquer (Acetates) and Styrene (45s).
Alcohol Free, no aggressive chemicals, no brighteners.
Removes a wide range of dirt, increasing bass response and improving soundstage clarity from LP playback.
For vacuum cleaning machines (RCM), Knosti type machines, manual washing & Ultrasounds cleaning.
It does not leave any residues into the groove and the stylus thanks to its high purity formula without unnecessary compounds.
Anti-static formula.
Non-Toxic, Biodegradable and environmentally friendly.
You can clean hundreds of records very cost-effective.
Fluid formula, clear, colourless and odourless. Mixed with distilled water it does not get cloudy and particles do not separate.

Our essential formula
without Alcohol

Pro-Clean-6 is produced with three non-ionic surfactants Laboratory Grade. The exact and balanced quantity allows a residue-free cleaning. The fourth component is distilled water.

Pro-Clean-6 does not contain any brightener agents, solvents, colorants, fragrance or aggressive compounds.

Concentrate was developed and produced by chemists and record collectors

Made In Spain

Go to Item

Winyl

Winyl Spray (250ml)

9,99 €*

Record Revirginizer (500ml)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Mixture of Alcohols, Biodegradbel Surfactants and Distilled Water, Laboratory Grade rwa materials. For Vinyl Records. Fast evaporation. Big size cost-effective.

250ml Bottle. Microfibre Cloth.

Made In Spain

Go to Item

Record Revirginizer

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

At last, a way to clean and restore your precious vinyl records without the use of expensive mechanical record cleaners, three step washing processes or dangerous petrochemicals. The university Award Winning RECORD REViRGiNiZER is the only product that can clean your vinyl records thoroughly and remove the pops and crackles from your valuable record collection.

"I am now sampling with the cleanest sound possible. Nothing fixes your records like Record Revirginizer!" - RZA, Grammy Award Winning Musician, Producer and Film Director.

Contains 500ml.

RECORD REViRGiNiZER isn't just a record cleaner, it actually restores your vinyl records close to their original condition by using a revolutionary anti-static polymer that works like a facemask on the grooves of your record. It's the closest thing to a miracle for vinyl record cleaning and restoration ever invented!

How it Works and More!

RECORD REViRGiNiZER is a viscous, non-toxic liquid that is poured onto a vinyl record. It is then massaged into the records surface and left to set. After setting it is easily peeled from the records surface, at the same time taking all the microscopic contaminants with it; it's a bit like a facemask...but for vinyl records!

REViRGiNiZER is formulated with just the right elasticity to remove all the embedded material, but at the same time it does not leave any residue, nor does it damage your vinyl in any way. The anti-static properties of the formula ensure that once the film is pealed off your vinyl will be static free. You can clean and restore your records close to their original condition and in some cases (due to residue left behind from the manufacturing mould release compounds) it can actually improve the sound of a brand new record as well.

With a REViRGiNiZER treatment your music will have a superior depth and clarity; this is another reason vinyl is enjoyed by audiophiles worldwide.

With a REViRGiNiZER treatment you can now sit back and enjoy your precious vinyl recordings just like they were new. We guarantee REViRGiNiZER is the best vinyl record treatment you can buy, or your money back!

We promise you that you will be amazed by the results. (Too bad we didn't think of it before the advent of CD's!)

How To Use:

1. Gently shake the bottle of REViRGiNiZER for 30 seconds before use.
2. Lay your vinyl record on a flat even surface, preferably on a clean record sleeve, and then wash hands.
3. Measure 20 ml / 0.65 fl.oz of REViRGiNiZER for a 30cm /12 inch record and pour evenly over one side of the record, avoiding the label. After you have used REViRGiNiZER a few times try reducing the amount to 15ml/ 0.5 fl.oz for a 30cm/12 inch record. Use 10ml / 0.3 fl.oz. for a 7 inch record.
4. Massage the REViRGiNiZER solution into the record’s grooves in a circular motion using one or two clean fingers.
5. Place a paper tab 5mm / 1/4 inch in from the outside edge of the record and over an area where the solution has already been applied. See illustration on bottle for approximate tab size.
6. Leave the REViRGiNiZER solution to dry completely. Drying time will normally take between 4 and 12 hours*. Drying time varies depending on humidity, evaporation and ambient temperature.
*Drying time can be significantly reduced by drying the record under a fan or in an air-conditioned room.
7. AVOID USING REViRGiNiZER ON RAINY OR HUMID DAYS unless records can be dried in an air-conditioned or dehumidified room or under a fan.
8. Once dry, use the paper tab to carefully peel the film from the record. DO NOT leave the film on the record longer than 3 hours hours after it has dried.
9. Remove any film that may still remain on the record by gently rubbing the remaining film with the dried film that has already been peeled off.
10. Repeat steps 1 to 9 on the other side of the record
11. Your record has now been restored with RECORD REViRGiNiZER.
12. If possible replace the old record sleeve with a new sleeve to avoid

Go to Item

Yellow Flower

Flower 12" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM510CB

94,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM510CB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH CONICAL STYLUS
Conical Bonded stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Conical Bonded stylus for less critical tilt angle adjustment allowing more flexible use on various tonearms.
VM type dual magnet design ensures outstanding channel separation, extended frequency response and superb tracking
Lightweight tapered aluminium cantilever allows for faithful reading of the record groove
Centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB
Durable low resonance polymer housing

Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 20,000Hz
Channel Separation 25dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 5.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Conical Bonded
Stylus Size 0.6 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN10CB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM510CB_UM_V2_11L_web_161011.pdf

Go to Item

VMN30EN Stylus

134,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

REPLACEMENT STYLUS FOR VM530EN
Elliptical Nude stylus
Nude Round Shank construction
Orange

Go to Item

VMN20EB Stylus

69,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN20EB
REPLACEMENT STYLUS FOR VM520EB
Elliptical Bonded stylus
Bonded Round Shank construction
Blue

Go to Item

VMN10CB Stylus

56,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VMN10CB
REPLACEMENT STYLUS FOR VM510CB & VM610MONO
Conical Bonded stylus
Bonded Round Shank construction
Blue

Go to Item

ATN95EX Stylus

34,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN95EX
REPLACEMENT STYLUS FOR AT95EX
Elliptical diamond stylus with Bonded Round Shank
Replacement stylus for AT95EX
Available in red

Go to Item

AT-LT13A Headshell

39,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LT13A
13G DIE CAST ALUMINIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 13g adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

AT-LH13/OCC Headshell

79,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-LH13OCC
13G TECHNIHARD™ ADJUSTABLE HEADSHELL WITH AT6101 QUAD WIRE
Adjustable overhang and adjustable azimuth (tilt)
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
1 hexagon wrench (for overhanging and tilt adjustment)

A 13g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

AT-XP5

89,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-XP5
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Designed for DJ venue application for their Hi-Fi audio performance
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• Carbon ABS cantilever

The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• Carbon ABS cantilever
• Great visibility of stylus tip for DJ use
• High-rigidity and Low-resonance cartridge housing
• Durable design for high-quality DJ playback
• Replacement Stylus: ATN-XP5

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 18,000 Hz
• Channel Separation: 20 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 5.5 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: 2.0 dB
• Stylus Shape: Elliptical
• Cantilever: Carbon Fibre Reinforced ABS
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 6.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP5
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

Manual: https://eu.audio-technica.com/resources/AT-XP5_UM_112301370_V1_11L_web_171018.pdf

Go to Item

AT-XP7

159,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-XP7
DUAL MOVING MAGNET STEREO CARTRIDGE

• Excellent Tracking ability
• Superior sound without compromise
• Durable robust design for high-quality DJ playback
• Great visibility of stylus tip for instant positioning
• VM dual magnet cartridge with elliptical bonded stylus

The AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

• Durable robust design for high-quality specialist DJ playback
• Cartridges designed for DJ venue applications for their Hi Fi audio Performance
• Great visibility of stylus tip for instant positioning in dark environments
• Audiophile experience associated with DJ’ing environment with the signal output level and output impedance characteristics adapted to DJ professional mixing boards
• VM dual magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
• Tapered aluminium cantilever
• Stainless wire suspension enables expressive higher frequency for clearer sound
• High-rigidity and Low-resonance cartridge housing
• Replacement Stylus: ATN-XP7

Specifications:
• Type: VM Dual Magnet
• Frequency Response: 20 - 20,000 Hz
• Channel Separation: 22 dB at 1kHz
• Vertical Tracking Angle: 20°
• Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
• Stylus Construction: Bonded Round Shank
• Recommended Load Impedance: 47,000 ohms
• Coil Inductance: 1.0 H (1 kHz)
• Output Voltage: 6.0 mV (mV at 1 kHz, 5 cm/sec)
• Output Channel Balance: Output Channel Balance
• Stylus Shape: Elliptical
• Cantilever: Aluminium tapered Pipe
• Static Compliance: 20 x 10-6 cm/dyne
• Dynamic Compliance: 8.0x10-6cm/dyne (100Hz)
• Mounting: Half-inch
• Dimensions: H17.2×W17.8×D28.3mm
• Accessories Included: Cartridge installation slotted screws 11.0 mm (0.43”) x 2 and 8.0 mm (0.31”) x 2, Washer x 2, Round nut x 2, Non-magnetic screwdriver x 1
• Recommended Load Capacitance: 100-200 pF
• Replacement Stylus: ATN-XP7
• Stylus Size: 0.3 x 0.7 mil
• Weight: 6.2g

User Manual: https://eu.audio-technica.com/resources/AT-XP7_UM_112301360_V1_11L_web_171018.pdf

Go to Item

ATN-XP5 Stylus

59,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN-XP5
REPLACEMENT STYLUS FOR AT-XP5 CARTRIDGE
Elliptical bonded stylus
Carbon ABS cantilever
Durable design for DJ application

Go to Item

ATN-XP7 Stylus

129,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN-XP7
REPLACEMENT STYLUS FOR AT-XP7 CARTRIDGE
Elliptical bonded stylus
Tapered aluminum cantilever
Durable design for DJ application
Tracking Force Range: 2.0 to 4.0 g

Go to Item

Musicbox Designs

LP Storage Box (65)

109,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

"The Brown Bomber" Seductive, sturdy and breathtaking. Handcrafted Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:
• Height 36.83 cm / 14.5 inches
• Width 34.30 cm / 13.5 inches
• Length 36.70 cm / 14.4 inches
• Weight 8.4 kg / 18.5 lbs.
• Holds up to 65 records

Sourced and crafted in Europe!

Go to Item

Musicbox Designs

LP Storage Box (65)

99,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Preorder shipping from 2024-06-21

We like to call her, "Blondie". You can paint her, stain her, or just leave her as is, "Blondie" will be there, holding your wax and looking good. She is a true all rounder, not only to store your records, but to enhance the decor of your music space. It's perfect for a newcomer who is just building their collection. Or, for the advanced collector, who may be looking for an aesthetically robust "current rotation" box.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful Birch Plywood Music Box is constructed from 12 ply Birch Plywood. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:

Height 36.83 cm / 14.5 inches

Width 34.30 cm / 13.5 inches

Length 36.70 cm / 14.4 inches

Weight 7.6 kg / 16.7 lbs.

Go to Item

Musicbox Designs

LP Storage Box (65)

104,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Simply called, "The Natural", this gorgeous box takes your vinyl to the purest depths of aesthetic glory. The unadorned beauty of pure natural oak, enhanced only by its own unique grain, will be sure to compliment your records and listening room in unadulterated analog magic dust.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation.

This beautiful solid oak Music Box is strong and durable with a prominent grain that makes each box unique. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Specs:
• Height 36.83 cm / 14.5 inches
• Width 34.30 cm / 13.5 inches
• Length 36.70 cm / 14.4 inches
• Weight 8.4 kg / 18.5 lbs.
• Holds up to 65 records

Sourced and crafted in Europe!

Go to Item

Record Spindle Holder

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Record Spindle Holders!

For all turntables - simply push onto the spindle and keep your slipmat and vinyl locked down!
• Soft silicon
• Pack of 5
Straight outta SoCal.

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

TTW10 Turntable Weight For 12" And 7"

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

PT01 Felt Replacements!

Easy to apply felt replacements for your PT01 Series turntables.

Self adhesive.

Straight outta SoCal.

Go to Item

Varia Instruments

114,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The TTW10 from Varia Instruments is a turntable weight which combines two needful features for every vinyl DJ: A disc stabilizer and an adapter for 7“ records. So, it works either for 12" and 7" records.

The Varia Instruments TTW10 features a smart mechanism: The 7“ adapter inside the weight is moveable - as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12“ record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way.

The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.

• dimensions: Ø75mm x 31mm (Ø2.9 x 1.2 inches)
• weight: 466g (1.02 lbs)
• handmade in Switzerland

Video: https://youtu.be/Z8ng431G528?list=PLcGzoHkRXIiapmclhU9L9GtVyQcTGCz1g

Go to Item

Madonna

1983 Lollipop Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

MADONNA posing with a lollipop in New York City in 1983. Limited quantities. Madonna achieved popularity by pushing the boundaries of lyrical content in mainstream popular music & imagery in her music videos. Referred to as the "Queen of Pop".

Go to Item

ATN91 Stylus

19,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

ATN91
REPLACEMENT STYLUS FOR AT91 CARTRIDGE
Replacement stylus for AT91 cartridge
Compatable stylus for CN5625AL and AT90 discontinued cartridges.
Upgrade replacement styli for AT3600L

Catalogue: https://eu.audio-technica.com/resources/catalogues/Phono_Cartridges_17.pdf

Go to Item

VM520EB

109,00 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

VM520EB
DUAL MOVING MAGNET STEREO CARTRIDGE WITH ELLIPTICAL STYLUS
Elliptical Bonded profile diamond stylus
VM type dual magnet system
Para-toroidal coils improve generating efficiency
Aluminium cantilever
Centre shield plate between stereo channels
Durable low resonance polymer housing

Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.

Aluminium cantilever
Para-toroidal coils improve generating efficiency
Centre shield plate between the left and right channels reduces crosstalk
Durable low resonance polymer housing

AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

ELLIPTICAL BONDED STYLUS
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Type VM Type
Mounting 1/2” centres
Frequency Response 20 - 23,000Hz
Channel Separation 27dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 4.0mV (1kHz, 5cm/sec.)
Vertical Tracking Angle 23˚
Vertical Tracking Force Range 1.8 – 2.2g (2.0g standard)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded Round Shank
Cantilever Aluminium Pipe
Coil Impedance 2,700Ω (1kHz)
Static Compliance 35 x 10-6 cm/dyne
Dynamic Compliance 8 x 10-6 cm/dyne (100Hz)
Recommended Load Impedance 47,000Ω
Recommended Load Capacitance 100 – 200pF
Weight 6.4g
Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Replacement Stylus VMN20EB
Accessories Included Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2

VM Cartridges: https://eu.audio-technica.com/resources/VM_Cartridges_EN.pdf

Manual: https://eu.audio-technica.com/resources/VM/VM520EB_UM_V2_11L_web_161021.pdf

Go to Item

Stylus Replica

Shure N44-7 Nachbau

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Yellow Flower

Summer 12" Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Nina Simone

Portrait Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

7" Schallplatten Aufbewahrung (100)

19,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.
Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

Go to Item

7" Schallplatten Aufbewahrung (100)

19,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The 7 inch 100 register box is designed for the storage, presentation and browsing of singles and 7‘‘ records. In the Record Box module system, it is usually placed as the top box and is a real eye-catcher.

Thanks to a side length of 36 cm, the 7-inch 100 register box can be perfectly connected to the other boxes and modules from Record Box. It is available in three colors and holds around 100 7-inch records.

The 7-inch 100 register box can be freely combined with all storage and register boxes in all three colors as well as the practical add-ons of the modular system. This creates individual storage space solutions and attractive record furniture as well as DJ racks, side tables, flat record shelves and much more.

The 7-inch 100 register box is made of robust MDF and has a resistant melamine resin surface. It can be combined into unique furniture with the help of the specially developed adhesive dots.

Technical details:

• Outside dimensions of the box: approx. 36 x 23 x 16.5 cm | Inside dimensions of the box: 33 x 20 x 15 cm (LxWxH)
• Volume: maximum 100 7 "es or books, magazines, pictures etc.
• Material: 15 mm MDF with melamine coating - white, black, dark gray
• Boxes for self-assembly - screwdriver required!

Go to Item

12" Schallplatten Aufbewahrung (100)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Vinyl LP Record Box is a best-value box to store up to 70 twelve inch vinyl records at home and flip through your preselection or for the next flea market. It's a favorable basic item with an understated look, plus the Vinyl LP Record Box is easy to assemble - you don't even need much craftsmanship to construct the 12" Record Box. Made from chipboard wood, this 33 rpm 12 inch vinyl record box is an essential piece for vinyl storage.

• outside dimensions of the box: approx. 36 x 36 x 31.5 cm | inside dimensions of the box: 33 x 33 x 30 cm (LxWxH)
• holds up to 70 12 inch records
• weight: approx. 4 kg
• Boxes for self-assembly - screwdriver required!

Go to Item

12" Schallplatten Aufbewahrung (100)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

HHV

HHV Logo Slipmat

120 Bonus Coins

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Bonus Coins

Made from 21 oz FattEz™, the HHV Logo Slipmats are perfect for precise DJing activities. This 12" slipmat is made from the highest quality poly felt material that's very similar to the thick felt of old school Technic slipmats. The HHV Logo Slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface. Perfect for the mix/club DJ as well as turntable and audiofile enthusiasts.

• Weight: 21 oz;
• thickness: 0.125 inch.
• 100% polyester felt.
• Made in USA

Go to Item

Beastie Boys

80's Group Shot Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

Chance The Rapper

Acid Rap Slipmat

12,74 €* 14,99 € -15%

Madvillain (MF DOOM & Madlib)

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

Madvillainy Remix Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

Odd Future Wolf Gang

Collage Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

A Tribe Called Quest

Logo Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

Run The Jewels

Logo Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

The Notorious B.I.G.

The King Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

Eazy-E

Locs Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

OFWGKTADGAF

Collective Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

DJ Yoda

DJ Yoda Slipmat

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

16oz - glazed bottom

Go to Item

AT-MG10 Headshell

49,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

AT-MG10
10G MAGNESIUM BODY HEADSHELL
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
Includes gold plated terminals quad wire

A 10g adjustable headshell manufactured from magnesium, complete with gold plated terminal quad wire. The AT-MG10 has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.

Go to Item

7" Record Storage Carry Case (50)

39,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Vinyl Case 7" Record Storage Carry Case is a best-value box to store up to 50 seven inch vinyl records at home or carry 'em to your next DJ set. It's a favorable basic item with an understated look, plus the Vinyl Case 7" Record Storage Carry Case is easy to assemble - you don't even need much craftsmanship to construct the Vinyl Case 7" Record Storage Carry Case. Made from wood, this 45 rpm vinyl record box is an essential piece for vinyl storage. Dimensions: approx. 21.5 x 19 x 21.5 cm.

Go to Item

7" Record Storage Carry Case (50)

39,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

7" Record Storage Carry Case (50)

39,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Go to Item

12" LP Record Storage Carry Case (50)

49,99 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

The Vinyl Case 12" LP Record Storage Carry Case is a best-value box to store up to 50 twelve inch vinyl records at home or carry 'em to your next DJ set. It's a favorable basic item with an understated look, plus the Vinyl Case 12" LP Record Storage Carry Case is easy to assemble - you don't even need much craftsmanship to construct the Vinyl Case 12" LP Record Storage Carry Case. Made from wood, this vinyl record box is an essential piece for vinyl storage. Dimensions: approx. 35 x 20 x 34 cm.

Go to Item

Winyl

Stylus Duo Clean

12,90 €*

Add to Cart Coming Soon Sold out Currently not available Not Enough Coins

Stylus Tip Cleaner

Special Double Set for preserving the purity of the Cleaner. After cleaning the tip stylus, put the brush into the Rinse Solution bottle which helps to clean it, making that the dirt will stay into its bottle. This way the Cleaner fluid will remain free of contaminants.

Stylus Duo Clean Lab-21 formula is a complete and effective cleaning solution for the delicate tip stylus. Its non-abrasive cleaning fluid improves tonal accuracy and High Fidelity performance, at the same time that prevents record damage.

Removes dust and dirt particles.
Extends both stylus and record life.
Reduces noise and distortion.
Improves tracking ability.
Completely safe for all stylus and cartridge assemblies.
Content:

Cleaner. 15 ml. glass bottle built-in soft brush in cap.
Rinse Solution. 15 ml. glass bottle.
Instructions (English, German, French and Spanish).
It can be used safely before each play because it contains non-flammable and non-toxic components.

Measures: 5x4x8cm (LxWxH)
Weight: 125g

Go to Item

Teac

TN-180BT

169,00 €*