DJ Equipment 1960 Items

Turn it up to 11 with the Montero Speaker! With 15 hours of uninterrupted play on a single charge of the built-in lithium battery, this small-but-mighty 20 watt powerhouse will rock your party from beginning to end. You don’t have to be tech savvy to enjoy this speaker, short press the power button once to turn on and short press twice to power off. The aux input enables you to hook up the Montero to your existing stereo setup, or you can transmit your digital tunes wirelessly using the built-in Bluetooth receiver. There’s also a built-in USB charger for those times when your phone battery is hovering way too close to 1%. Never again will a dead phone battery ruin your good time! Keep your party going all night with the stylish and powerful Montero Speaker.

Specifications:
• Built-in Bluetooth® Receiver
• 20 Watt Amplifier
• Built-in Lithium Battery
• Auxiliary Input
• USB Phone Charger
• Unplug Unit Before Powering Off
• Dimensions: 26 cm (w), 16,5 cm (h), 5,7 (d)
• Weight: 1,25 kg

Turn it up to 11 with the Montero Speaker! With 15 hours of uninterrupted play on a single charge of the built-in lithium battery, this small-but-mighty 20 watt powerhouse will rock your party from beginning to end. You don’t have to be tech savvy to enjoy this speaker, short press the power button once to turn on and short press twice to power off. The aux input enables you to hook up the Montero to your existing stereo setup, or you can transmit your digital tunes wirelessly using the built-in Bluetooth receiver. There’s also a built-in USB charger for those times when your phone battery is hovering way too close to 1%. Never again will a dead phone battery ruin your good time! Keep your party going all night with the stylish and powerful Montero Speaker.

Specifications:
• Built-in Bluetooth® Receiver
• 20 Watt Amplifier
• Built-in Lithium Battery
• Auxiliary Input
• USB Phone Charger
• Unplug Unit Before Powering Off
• Dimensions: 26 cm (w), 16,5 cm (h), 5,7 (d)
• Weight: 1,25 kg

REPLACEMENT STYLUS FOR VM530EN
Elliptical Nude stylus
Nude Round Shank construction
Orange

Wooden turntable with MMC Cartridge and PC
Encoding

EN
• Wooden turntable
• Platter with a diameter of 300 mm
• USB Port for PC connection to convert vinyl
to digital format
• RCA line output
• 2 rated speed settings 33 and 45 RPM
• Moving Magnetic Cartridge (MMC)
• Auto stop
• Belt drive
• Removable plastic dust cover
• MDF cabinet

• Power source: AC100-240V
• Power consumption max : 2,4W
• Dim. unit : 410 x 320 x 120 mm (WxDxH)
• Net /Gross Weight: 3,1 kgs / TBC kgs
• Master carton quantity : 2 pc
• EAN-code: 87.11902.03755.2 (Black)
87.11902.03757.6 (Wood)
Container quantity :
20’ ft : 480pcs
40’ ft : 1000pcs
40’ ft HQ : 1150pcs

A glamorous modern tassel that catches
and reflects the light as it sways through
space, whether at an open air or in a pulsating
bunker.

The new RIOT CONTROL-PACK LITE was developed especially for DJs and musicians who frequently travel with a DJ-controller or other production equipment looking to maintain a lite and compact profile. The padded main compartment features an integrated laptop-sleeve and a height-adjustable rolltop closure for ultimate storage flexibility. There is space to support models such as Pioneer DDJ-800, DDJ-SR2, NI Kontrol S4MK3 or Roland DJ-707M, etc., along with a laptop and accessories. Smaller gear such as headphones, cables and power supplies can be easily stored in the large front pocket.

FITS

Laptop up to 17"
Ableton Push2
Akai MPK-25
Akai MPC Renaissance
Arturia MiniBrute2
Arturia DrumBrute
Arturia MicroBrute
Denon MC-4000
Mixars Primo
NI Kontrol S4MK3
NI Kontrol S2MK3
Numark Mixtrack Platinum
Numark Mixtrack Pro 3
Numark NS6II
Numark NV2
Pioneer DDJ-SX3
Pioneer DDJ-800
Pioneer DDJ-SR2
Pioneer DDJ-RR
Pioneer DDJ-SB3
Pioneer DDJ-400
Roland DJ-707M
Roland DJ-202
Reloop Terminal Mix 4

BASICS

Heavy duty and 100% waterproof Tarpaulin
PVC-coated zippers
210D Lining lining
Flexible height adjustment through Rolltop closure
Integrated laptop compartment
Hidden pocket for documents and personal belongings
Padded back panel with airflow system
Ergonomic backpack straps and adjustable sternum strap
Rubberized Bottom
Trolley-sling

SPECS

+ Outer dimensions: (H/B/T): 53-70 x 35 x 20 cm

+ Inner dimensions: : 52- 64 x 34 x 15 cm

+ Weight: 1,38 kg



+ Color: black/bionic-green (Item-No.: 47889 / EAN-Code: 4041212478894)

UDG presents the Urbanite Series, cutting edge bags for today's on the go DJ’s / Producer’s. Each design not only makes you feel good, they make you look great. The Controller Sleeve lets you take a wide variety of your essential gear for your digital set up from one gig to the next. The main compartment includes high-density egg-crate interior padding that protects jog wheels, faders and buttons of various sized equipment. It let’s you safely store your digital controller (such as the NI S8 or Pioneer DDJ-RX/SX3) in the main compartment. The UDG Controller Sleeve is available in 2 sizes: Medium & Large skillfully designed to fit many different models of equipment safely during transport.

• Weight: 2,40 kg / 5.28 lbs
• EAN: 8717228279232
• Outer Dimensions (W x H x D): 73 x 43 x 14 cm | 28.7 x 16.9 x 5.3 inch
• Inner Dimensions (W x H x D): 71 x 40 x 11.5 cm | 27.6 x 15.7 x 4.5 inch
• Material: Water repellent laminated 600D Polyester exterior

Protection:
• Egg Crate interior protects jog wheels, faders & buttons
• Adjustable foam inserts to customize main compartment to your gear

Extra's:
• Easy grip zipper pulls
• Convenient carry handle
• Padded shoulder strap

Fits:
• Pioneer DDJ-FLX6, DDJ-1000SRT, DDJ-800, DDJ-1000, DDJ-RX, DDJ-SX3, DDJ-SX2, DDJ-SX, DDJ-RR, DDJ-SR2, DDJ-SR, DDJ-S1, DDJ-T1, DDJ-Ergo
• Pioneer XDJ-RR, XDJ-R1, XDJ-Aero
• NI Traktor Kontrol S3, Traktor Kontrol S8
• Denon DJ MC7000
• Numark NS6II, Mixtrack Platinum/ Pro 3, Mixdeck Quad, 4Trak, N4
• Reloop Mixon 4, Touch, Terminal Mix 8, Beatmix 4
• Roland DJ-505
• or similar size controllers

A Digital DJ/Producer looking for a professional, durable case solution for your Denon DJ Prime 2? Then look no
further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable
lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection
against drops, scratches & liquids. Skilfully designed & moulded to fit the Denon DJ Prime 2, this case is perfect
for the travelling DJ/Producer that needs to protect their equipment.

FEATURES
• Durashock molded EVA foam
• Fits: Denon DJ Prime 2
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks
• Heavy duty handle
• Easy grip zipper pulls
• Convenient shoulder strap

Outer Dimensions (W x H x D) 68.5 x 42.6 x 14.9 cm | 26.9 x 16.8 x 5.8 inch
Inner Dimensions (W x H x D) 65.1 x 41.2 x 12.5 cm | 25.6 x 16.2 x 4.9 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Protective egg-crate foam
Extra's Heavy duty handle
Easy grip zipper pulls
Convenient shoulder strap
Fits Denon DJ Prime 2 Controller

The Zomo VS-Rack Studio is a practical, elegant and portable vinyl storage solution made of metal in a modern and unique design. The vinyl stand is a decorative element and a great eye-catcher in every home.
Particularly practical: by simply turning the stand over, it can be used in two different ways. Once each LP is separated individually by the lamellae or all vinyls in one piece for easy leafing through.
The material is made of powder-coated steel and combines durability with timeless design.

Features:
• offers space for 50-75 LPs (depending on the thickness of the records)
• innovative and elegant design
• can be used in 2 different ways - simply turn the stand upside down for a new function
• made of powder-coated metal
• robust and durable
• high quality from Zomo

Technical specifications:
• Dimensions (L x W x H): 206 x 346 x 456 mm
• Weight: 4,2 kg

The Zomo Recordcase SP-110 is a very solid quality case which impresses by its generous
volume. In this Recordcase you can store about 100 LPs which can easily be splitted into the two halves because of the oblique 50/50 divide.

Because of the slanted splitting the records can be easily found and are ideal protected from the back.

Sheer genius and totally cool! It´s Zomo!

Features Zomo Recordcase SP-110
•sturdy quality
•Flightcase for approx. 100 records
•ideal for DJs and clubs
•50/50 pitch for easy vinyl browsing
•Comfortable carrying handle
•Lockable snap locks
•Ball corners with edge protection

Technical Specifications
•Capacity: approx. 100 LPs
•Internal dimensions: 345 x 345 x 350 mm
•External dimensions: 800 x 410 x 420 mm
•Weight: 6,1 kg

The Zomo Recordcase SP-110 is a very solid quality case which impresses by its generous
volume. In this Recordcase you can store about 100 LPs which can easily be splitted into the two halves because of the oblique 50/50 divide.

Because of the slanted splitting the records can be easily found and are ideal protected from the back.

Sheer genius and totally cool! It´s Zomo!

Features Zomo Recordcase SP-110
•sturdy quality
•Flightcase for approx. 100 records
•ideal for DJs and clubs
•50/50 pitch for easy vinyl browsing
•Comfortable carrying handle
•Lockable snap locks
•Ball corners with edge protection

Technical Specifications
•Capacity: approx. 100 LPs
•Internal dimensions: 345 x 345 x 350 mm
•External dimensions: 800 x 410 x 420 mm
•Weight: 6,1 kg

The Zomo Recordcase MP-100 V.2 is a very solid quality case which impresses by its generous
volume. In this Recordcase you can store about 100 LPs which can easily be splitted into the two halves because of the 50/50 divide.

This Case is a classic and one of the most selling cases since years. Due to the ergonomic spiral handle the MP-100 V.2 can be carried really
comforatable. The straight design doesn´t need to be explained!

Sheer genius and totally cool! It´s Zomo!

Features Zomo-Recordcase MP-100 V.2
•Capacity: about 100 LPs
•Size: 370 x 370 x 370 mm
•Weight: 6,1 kg

PROS
•MDF housing
•2 built-in speakers
•Adjustable speed
•Semi-auto stop

PRODUCT INFORMATION
•The Lenco LS-40 is a modern turntable with two built-in speakers. Enjoy your favourite vinyl at a single press of a button. Forget complicated music systems, because the Lenco LS-40 effortlessly brings your records to life.

•Whatever the music genre you like listening to, you can change easily from 33 to 45 RPM. For more volume, you use external speakers and the RCA jacks on the back of the turntable. This ensures that you can fill any size of room with music. The turntable also features an AUX input.

•Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LS-40 turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tonearm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LS-40 is supplied with a dust cover that keeps your Lenco free of dust during brief periods when you are not using your turntable. A CE-UK multi-plug AC power supply comes with the turntable.

SPECIFICATIONS
•Color: Black
•SKU: A003103
•Product height: 39.30 cm
•Product depth: 12.10 cm
•Product width: 42.10 cm
•Number of speakers: 2
•Speaker options: Speakers integrated
•Number of RCA outputs: 1
•12V car: Yes
•Power option: Power on/off switch, AC
•Type of drive: Belt drive
•Turntable rpm: 33 rpm, 45 rpm
•GTIN / EAN: 8711902040972
•Material: Wood
•Manufacturer's warranty: 24 months
•Maximum power consumption: 10W
•Headphone connector: Yes

UDG developed a light EVA turntable hard case designed for life on the road. The UDG Turntable Hardcase is constructed from durable lightweight compression molded EVA material with a water repellent laminated nylon exterior. This quality case provides second-to-none protection against drops, scratches & liquids. High density Egg crate interior padding protects turntable platter, faders and buttons of the turntable.

Weight 3,17 kg / 6.974 lbs
Outer Dimensions (W x H x D) 52.5 x 42.5 x 21.0 cm | 20.7 x 16.7 x 8.3 inch
Inner Dimensions (W x H x D) 47.5 x 37.0 x 18.0 cm | 18.7 x 14.6 x 7.1 inch
Material Durashock molded EVA foam
Protection Soft fleece interior
Removable top-bottom egg crate foam prevent damage from vibrations and shocks
Extra's Includes adjustable foam pads to fit various turntables
Convenient carry handles
Convenient shoulder strap
Easy grip zipper puller
Fits - Technics SL-1200MK7, SL-1200MK6, SL-1200 MK5, SL-1200 MK4, SL-1200 MK3, SL-1200 MK2, SL-1200GR, SL-1200GAE
- Denon VL12 Prime, SC6000,
- Pioneer PLX-1000, PLX-500, CDJ-3000,
- Reloop RP-8000 MK2, RP-8000 Straight, RP-8000, Reloop RP-1000M, RP-1000 MK2, RP-2000 MK2, RP-2000 USB MK2, RP-4000 MK2, RP-7000, RP-7000 MK2, RP-7000 MK2 GLD, RP-7000 MK2 Silver
- Audio Technica LP120-USB, LP120XUSB, LP1240-USBXP, LP1240-USB, LP140XP, LP3, LP5, LP7, LPW40WN
- Stanton STR8-150, ST-150, T.52, T.55 USB, T.62, T.92 USB
- Mixars STA, LTA
- Vestax PDX-3000, PDX-3000Mix, PDX-3000MKII or similar size turntable

Made from water-repellent nylon fabric, the Underground Resistance UR Record Bag is a sturdy record bag that holds up to 50 12"es. Accessories and DJ gear like a spare needle or headphones find space in sensibly arranged zipper pockets, side compression straps stabilize the content, the shoulder strap is adjustable, and the flap closes with side-release buckles and it's also equipped with embroidered Underground Resistance UR branding.

Dimensions (cm): 33 x 34 x 16,5
Weight: 900 g

The UDG Sling Bag is a functional bag with a minimalist design. It's water-resistant, padded for maximum protection of your beloved vinyl goodies, and stores about 45 12" records as well as 24 CD copies in two folders.

UDG Sling Bag - features:

• 2 CD folders for 24 CD copies, each stored in the front compartment
• front and side pockets for accessories
• rugged top handle
• padded and PVC-backed walls
• adjustable and padded shoulder strap
• UDG security lock
• rubber details at bottom to protect the fabric
• dimensions: approx. 32 x 40 x 25 cm
• shell: 100% nylon
• lining: 100% polyester

The Art Vinyl Play & Display Flip Frame Triple Pack contains three disply frames for your the cover sleeves of you favorite 12"es or LPs.

A Digital DJ looking for a professional, durable case solution for your Pioneer PLX-CRSS12 turntable? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression molded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & molded to fit the Pioneer PLX-CRSS12 turntable, this case is perfect for the travelling DJ that needs to protect their equipment.

FEATURES

Protection:
• Water repellent laminated nylon exterior
• Removable top-bottom egg crate foam prevent damage from vibrations and shocks
• Black soft fleece interior

Extra's:
• Convenient carry handles and shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer PLX-CRSS12 turntable

Specifications:
• Weight: 2,35 kg / 5.17 lbs
• Outer Dimensions (W x H x D): 52.5 x 43.5 x 21.0 cm | 20.7 x 17.1 x 8.3 inch
• Inner Dimensions (W x H x D): 45.8 x 35.8 x 17.0 cm | 18.0 x 14.1 x 6.7 inch
• Material: Durashock molded EVA foam

A Digital Producer looking for a professional, durable case solution for your Pioneer DJM-A9? Then look no further, UDG developed a super light EVA Hardcase designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior this case provides protection against drops, scratches & liquids. Skillfully designed & moulded to fit the Pioneer DJM-A9, this case is perfect for the travelling Producer that needs to protect their equipment.

FEATURES

Protection:
• Cover main material 600D polyester with 5 mm EVA durashock molded body
• Water repellent laminated nylon exterior
• Black soft fleece interior
• Protective egg-crate foam prevent damage from vibrations & shocks

Extra's:
• Convenient carry handles
• Convenient shoulder strap
• Easy grip zipper pulls

Fits:
• Pioneer DJM-A9

Specifications:
• Weight: 1,54 kg / 3.388 lbs
• Outer Dimensions (W x H x D): 45.2 x 48.3 x 14.0 cm | 17.8 x 19.0 x 5.5 inch
• Inner Dimensions (W x H x D): 41.2 x 46.3 x 13.0 cm | 16.2 x 18.2 x 5.1 inch
• Material: Durashock molded EVA foam

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: red

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

rare unique vintage piece

material: re-used air mattress
colour: blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: olive

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: bordeaux

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

Magnetically Stabilized Record Broom

Easy and effective cleaning arm

Record brooms have been around since the early 1970s. Some of them do a good job, some rather not. In many cases the brush rushes towards the middle of the platter, running out of sync with the tonearm. This phenomenon is known as skating. Recent developments aim to tackle this problem. Here the highly efficient neodymium magnet comes into play. These magnets are used to stabilize the record broom of the Sweep it S2. Sweep it S2 is constructed in collaboration with Klaus Mick and uses his patented technology to stabilize the record broom. Extensive theoretical and empirical research has been put into the development of this product.
The magnetic attraction between the neodymium magnet – based in the top part of the cylinder – and the [Fe] core/counterweight stabilizes the record brush. Moreover, the distance between the neodymium magnet and the [Fe] core/counterweight is carefully chosen to ensure a specific magnetic stabilization force. As the aluminium of the brusharm is paramagnetic, it acts like an additional space between the neodymium magnet and the [Fe] core/counterweight.
Sweep it S2 is height adjustable within a range of about 1cm. The position can be locked with the set screw on the base. With this mechanism, it is possible to adjust the height of the arm of the record broom in order to align it horizontally with the platter. A correct horizontal alignment ensures the correct tracking force of about 6g.
Flexible placement

The record broom can be placed in one of two left hand side corners of the turntable. The placement is depending on the type and shape of your turntable. At the optimal position the brush should align with the spindle (i.e. the center of the platter). Deviations (relative to the spindle) between 1,5 to 2 cm are well compensated by design of the Sweep it S2. Higher deviations can cause more drastic skating effects.

Features:
• Neodymium magnet stabilization
• Avoids the common record broom phenomenon known as „skating“
• Height adjustable
• Flexible placement
• Natural hair brush with extremly low electronegativity
• Cleans your records during playback
• Constructed in collaboration with Klaus Mick
• Available in silver and black metal finish

Technical Specifications:
• Weight: 430 g
• Total arm length: 226 mm
• Total height: 65 mm - 75 mm
• Base diameter: 46 mm
• Arm material: Aluminium

With its round diamond, the MP-100 cartridge is particularly suitable for older records. Even scratches and dirt do not affect the pleasant, neutral sound that this system makes possible. The MP-100 is the most affordable scanner in the MP range.

TECHNICAL SPECIFICATIONS:
• Principle: MI - High Output (for the MM input)
• Weight: 6.5g
• Height 18mm
• Needle cut: Round 0.6mm
• Cantilever: aluminum
• Frequency response: 20 - 20,000 Hz
• Output Voltage (1kHz, 5cm/sec): 5.0mV
• Channel separation (1kHz): > 22 dB
• Channel balance (1kHz): < 2.0 dB
• Needle compliance: 19 µm/mN
• Recommended tracking force: 21 mN (18-23 mN)
• Recommended termination resistance: 47 kOhm
• Recommended termination capacity: 150 – 200 pF
• Replacement needle: JN-P100
• Cartridge type: without head shell

taunus 1.2 | com fi | deep blue

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: water-repellent cotton canvas w/ leather buttons
colour: deep blue
size: 48 x 38 x 8 cm

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

ATN-XP7
REPLACEMENT STYLUS FOR AT-XP7 CARTRIDGE
Elliptical bonded stylus
Tapered aluminum cantilever
Durable design for DJ application
Tracking Force Range: 2.0 to 4.0 g

Turntable platter

Functional and easy to use sound improvement!

Upgrade your Elemental or Essential turntable with Acryl it E. Acryl it E is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances.

The change is easily made: just exchange your metal platter for Acryl it E. Acryl it E is able to improve overall performance significantly!

Features:
• Suitable for Elemental, Essential & Primary turntables
• Substitutes MDF platter
• Inert material avoids resonances
• Ideal for use with Clamp it
• Audiophile sound tuning
• Optical upvaluation

Technical Specifications:
• Material: Acryl satiniert
• Diameter: 300 mm
• Height: 20 mm
• Weight: 1,2 kg net

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

Analog and simply good - We are resurrecting the old treasures from your childhood and youth

Long awaited and available from the end of February / beginning of March in two different colors. In black / white and in sky blue / silver.

Anyone who grew up in the 80s and 90s will remember the feeling when the presenter on the radio messed up the beginning or end of a track when recording a mixtape. That was annoying.

You were all the more proud when you were able to capture the latest hits of the 80s on tape without interruption.

Bring these treasures and your old radio play collections back to life with the FiiO CP13.

But why did FiiO of all companies come up with the idea of bringing this topic back to life? The answer to this question is quite simple.

Since its inception fifteen years ago, FiiO has been dedicated to the amplification and high-quality reproduction of analog audio signals. The common intersection of this classic and modern digital theme is therefore tailor-made for FiiO. We can therefore look forward to an old idea in a new guise.

One of the best features is certainly the significantly increased output power compared to before. This means that the FiiO CP13 is also capable of driving sophisticated hi-fi headphones.

Since the FiiO CP13 is essentially about classic and analog playback, FiiO has decided not to implement Bluetooth. Digitizing a good analogue audio signal and transmitting it via Bluetooth would not do justice to the spirit of the cassette era.

Specifications:
• Mechanical logic core
• Copper flywheel
• Audio output: 3.5mm stereo jack
• Dimensions: approximately 120mm x 88.3mm x 31.8mm
• Output voltage: >250mV
• SNR: 55dB
• Weight: approximately 310g
• Battery capacity: 1800mAh
• Playing time: >13 hours @40mV

Record clamp.
The ergonomic form of this record clamp is precision machined from aluminium, black anodized and finished with a silver rim. On the underside is a Teflon insert that locates over the spindle for frictionless positioning.
Weight: 215 g

Black is the new black. Bold, seductive, and sexy. We have taken our glorious edge glued Oak Music Boxes and stained them in India Ink, then we buff them, and apply a coat of black tinted oil to bring out the unique grain, for what we consider to be "Black Magic". Protect and Display your vinyl in exquisite luxury and compliment your home decor and listening room in style.

Premium Solid Oak LP Storage Box. Designed specifically for the vinyl lover who insists on the finest vessel to house his/her collection. These boxes will enhance the decor of any room they are placed in, they are simply stunning.

From the advanced record collector, who may need a beautiful "current rotation" box, or a newcomer, who is taking their first steps into the world of records, our boxes are a reflection of that Hi Fidelity analogue feeling; aesthetically rich, full bodied, and sexy. Modular and Stackable.

Our boxes can be used both vertically and horizontally to display and protect your records. And as your collection grows, our boxes are designed to stack on each other for the ultimate vinyl presentation. Holds up to 65 records

This beautiful solid oiled oak Music Box is strong and durable with a prominent grain that makes each box unique. We sand each box to a smooth texture and oil by hand to bring out the individual richness of the grain. There is no particle board or MDF involved in the construction and we do not use any metal joinery. We have reinforced the boxes structural integrity with internal wooden dowels, so they are not only gorgeous but extremely durable.

Dimensions:
• External Specs: 367mm x 367mmx 340mm (L x W x H)
• Internal Specs: 330mm x 330mm x 322mm
• Weight: 8.4kg / 18.5lbs

Sourced and crafted in Europe!

* As with all of our wooden products, proper care and handling will preserve the life and beauty of our products. Wood is a living material, so treat it as such. Protect it from extreme temperature swings (do not place directly near heaters) or extreme moisture. Our Oiled products not only enhance the natural beauty of our Music Boxes they serve as a protective barrier for the wood itself. We do sell Natural Oak Music Boxes as well and we recommend our clients use some form of wood protection to preserve their pieces. Wood Oil or wax will do the job nicely.

taunus 1.2 | com fi | ballistic nylon black

the larger version of our puristic and lightweight backpack
for vinyllovers, hunters and jockeys.

_additional spacious pocket on the inner backside
_easily holds 15inch+ laptops or up to 25 x 12" records
_comfortably cushioned
_unique adjustable buttons closure made from re-used genuine
leather
_wider straps (40 mm) for more comfort

material: certified cordura® ballistic nylon, water-repellent
colour: black
size: 48 x 38 x 8 cm

aw2019 / 2020 collections instruments

made in germany

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

first ever airbag craftworks model
& a safe place for your beloved vinyl

_fits up to 50x 12" inch records or 2 large din a4 files
_3 subdivisions
_adjustable shoulderstrap
_very durable lining

material: water resistant cotton
colour: deep blue

made in germany

34 x 34 x 13 cm

The inner lining is made of recycled material, which is processed depending on availability. This can lead to color deviations on some details of the bag.

pictures: airbagcraftworks.com

PROFESSIONAL PREMIUM DJ AND STUDIO HEADPHONES
With the RHP-20, Reloop introduces premium DJ headphones with scene stealing, state-of-the-art aesthetics and elite sound design that is acoustically balanced for professional use.

CLEAR FREQUENCY SEPARATION
Engineered with exceptionally high audio output for a club setting and clear frequency separation with the ideal balance of mids, highs and bass, these innovative headphones are perfect for the DJ booth or the studio.

HIGH-QUALITY DESIGN
Equipped with a rotating ear cup for on-shoulder/single-ear monitoring, the RHP-20 is rugged and ready for continuous operation in even the most challenging environment with a sturdy hinge and folding mechanism made of high-quality aluminum and a hard rubber head band that withstands wear and tear.

COMFORTABLE HEADPHONES
The design is lightweight, and the ear cups are carefully crafted to surround the ears in comfort with memory foam padding covered in fine protein leather, so there is no pinching or fatigue... even on a long night. A trendsetter with pristine audio quality and robust construction, the RHP-20 sets a new standard for the professional DJ headphones.

FEATURES
• Professional DJ headphones, closed rotary and retractable construction
• Rubber paint finish
• Convenient rotating ear cup for easy on-shoulder/single-ear monitoring
• Powerful sound and clear frequency separation, optimized for DJs
• Comfortable Memory-Foam ear cup padding with fine protein-leather surface
• Large ear cup cavity surrounds ear for comfortable wear
• Accented with rubber-paint finish
• Ultra durable head band crafted with high quality hard rubber
• Solid rotatable and foldable mechanism made of sturdy aluminum
• Flat comfort construction with compact and lightweight ear cup chassis
• One-sided cable duct with removable mini XLR plug for easy cord swap
• Extremely high output rating
• Extremely solid construction for DJs' continuous operation
• Innovative and stylish deluxe headphones

TECHNICAL DATA
• Frequency range: 30 Hz - 30 kHz
• Acoustic pressure: 100 dB at 1 kHz (1 mW)
• Impedance: 25 ohms
• Max input power: 3000 mW
• Connections: 3.5/6.3 mm jack (gold-plated contacts)
• Cord: 3 m (spiral cable)
• Weight: 270 g
• Incl. high-quality carrying bag with folding mechanism

We, at UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases. The inner sides are protected with pick & pluck foam that consists of two separate layers, each allowing user to create individualized adapted compartments. The pick & pluck
foam allow you to pluck out any desired shape you require for various-sized DJ-controllers and providing the additional option of creating another slot underneath the controller for laptop or cable storage. This pick & pluck foam creating an easy, do-it-yourself customized system of case interiors.

The UDG Ultimate Pick Foam Flight Cases are designed to keep your gear protected from accidental damage when you transport it to and from gigs. They’re compact and lightweight yet tough enough to keep your gear safe.

FEATURES:
• Fits: Technics SL-1200MK7, SL-1200GR, Denon VL12 Prime, Reloop RP-8000 MK2, Pioneer PLX-1000/ 500
• Lighter weight than traditional flight cases
• Black Diamond finishing surface
• Corrosion resistant aluminum profiles with trong rounded corners
• Fully-lined with high density foam protective padding
• Ergonomic & sturdy carry handle
• Pick & pluck foam with two separate layers
• Replacement pick & pluck foam is available to purchase
• Rear cable access hole with cover
• Protective egg-crate foam on lid
• Two side strong butterfly lock and solid metal hinges
• Rubber feet at the bottom for support in standing position
• Several rivets for more solid

DIMENSIONS:
(Width x Height x Depth)

Outer: 49 x 42,3 x 21 cm
Inner: 48 x 41,3 x 20 cm

Weight: 4,55 kg / 10.01 lbs